ArchiveThis study aims to address the technical challenges in exploring concealed ore bodies in alpine shallow overburden areas. Hence, it conducted the application test and demonstration of deep-penetrating geochemical exploration techniques in two typical landscape areas: the low-to-middle mountainous desert steppe and the alluvial-proluvial gravelly Gobi along the periphery of the Qaidam Basin. The results show that the proportions of fine-grained (d≤96 μm), micro-fine-grained (d≤20 μm), and ultra-fine-grained (d≤5 μm) materials in the overburden serve as the core basis for evaluating the effectiveness and adaptability of deep-penetrating geochemical exploration techniques. Through the multi-technique effectiveness tests conducted in the Relong and Yuka gold deposits, the differences in application efficiency of various techniques across different landscape areas were clarified. The measurement of micro-fine-grained soils was employed for a large-scale demonstration application, with the delineated anomalies highly coinciding with the known mineralized zones. Moreover, a concealed ore body with a gold grade of up to 3.85 g/t was discovered in the Relong gold deposit. Finally, a three-level technical combination, consisting of regional reconnaissance, anomaly verification, and ore body positioning, was proposed for alpine shallow overburden areas. Overall, the results of this study provide technical support for the exploration of concealed ore bodies in similar areas.
This study aims to determine the geochemical characteristics of sedimentary clay-type lithium (Li) deposits and their implications for ore prospecting in the Shirenbei Basin, northeastern Guangdong, China, as well as exploring the regional metallogenic conditions and ore-prospecting indicators. Based on a 1∶200,000 stream sediment geochemical survey, this study conducted a comprehensive analysis of the geochemical characteristics of Li and their relationships with strata, lithologies, and sedimentary environments using methods of economic geology, sedimentology, mineralogy, and geochemistry. Two Li anomalies were delineated in the study area. Among them, the Li anomaly in the north exhibits a larger scale and a peak anomaly value of 234.3×10−6, with the Yetang Formation (K2yt) exposed in the anomaly center. The composite anomaly consists of 16 elements (or oxides), including Li, fluorine (F), and sodium oxide (Na2O), with distinct overlapping relationships observed among them. Investigations reveal that the Yetang Formation is a lacustrine evaporative sedimentary suite, with its sedimentary center located in the northern part of the basin. Zones with high Li content correspond primarily to zones containing calcareous, fine-grained clastics. Rock and mineral analyses indicate a significant positive correlation between whole-rock Li2O content and clay mineral content. The Yetang Formation exhibits significantly higher geochemical background values of whole-rock Li content than other geological units, with the Li enrichment center identified in the fourth layer of the formation. Three ore-bearing layers were delineated in the study area. They are primarily distributed in the middle and upper parts of the Yetang Formation, with a total thickness of 226.14 m. The ore-bearing rock series show an exposed area of approximately 5.2 km2, demonstrating great potential for ore prospecting. The results of this study suggest that the Li geochemistry in stream sediments can effectively reflect the regional metallogenic background and that the Li-F-Na2O anomaly combination serves as a significant ore-prospecting indicator for clay-type lithium deposits. Lithium mineralization is jointly controlled by factors including paleoclimate, evaporative sedimentary environment, lithofacies paleogeographic framework, specific stratigraphic units, and lithologic suites. Additionally, multiple similar sedimentary basins occur in the eastern segment of the Nanling metallogenic belt and its adjacent Wuyi metallogenic belt, holding prospects for further breakthroughs in ore prospecting.
The Bangpu mining area, located in the eastern Gangdese metallogenic belt, represents a typical porphyry-skarn deposit. Since skarn ore bodies occurring in shallow skarns at the periphery of porphyries have been largely exhausted, there is an urgent need to explore deep replacement resources. This study aims to further determine the spatial distribution of deep-seated concealed rock masses and their surrounding ore bodies in the study area. This effort will help achieve breakthroughs in mineral exploration. To this end, this study conducted 1:10000 gravity surveys, high-precision magnetic surveys, and audio-frequency magnetotelluric (AMT) surveys in the eastern part of the Bangpu mining area, followed by an analysis and summary of the causes of geophysical anomalies. The comprehensive geophysical prospecting results indicate that the high- and low-amplitude gravity anomaly zones in the central part of the study area correspond to intermediate-mafic and intermediate-acid concealed rock masses, respectively. Two magnetic anomalies identified in the southwest might be ore-induced anomalies caused by magnetite and pyrrhotite surrounding skarns. In combination with the AMT data, boreholes were drilled in low-resistivity zones at the edge of high-amplitude gravity anomalies, as well as zones with strong magnetism, moderate gravity, and low-amplitude resistivity anomalies, to explore the deep rock masses and their surrounding skarn-type ore bodies. Consequently, two copper belts (ore bodies) and two lead-zinc ore bodies were identified. The exploration results of this study demonstrate that high-precision gravity surveys, magnetic surveys, and AMT surveys perform well in exploring deep concealed ore bodies in the Bangpu mining area, Tibet. These methods constitute an effective technical combination for deep mineral exploration of similar deposits in the Gangdese metallogenic belt.
In the evaluation of the performance of horizontal well fracturing for complex reservoirs, conventional microseismic monitoring faces two major challenges. First, reliance only on microseismic data renders it difficult to construct a continuous fracture network that precisely matches geological conditions. Second, insufficient analysis of both primary mechanisms governing the spatiotemporal distribution of microseismic events and the causes of in situ stress deflection leads to a lack of theoretical support in the evaluation. This study investigated the Y108 horizontal well in the North Jiangsu Basin. Based on the fracturing-induced microseismic responses of the well, this study proposes a multidisciplinary parameter-coupling method for collaborative microseismic-fracture network modeling. By deeply integrating microseismic data with rock properties, reservoir anisotropy, and lithofacies variations, the proposed method overcomes the limitations of conventional methods driven solely by microseismic data. By constructing a continuous fracture network using the shortest path connection criterion, this study systematically reveals the intrinsic relationship of the spatiotemporal distribution of microseismic events with rock properties and stress parameters. The results indicate that the localization results of microseismic events highly correlate with the distribution of natural fractures predicted based on the ant-tracking volume. The constructed fracture network aligns with the principal stress direction, conforming to geological understandings. The strong anisotropy, extensive microfractures, and significant lithofacies variations in the second submember of the fourth member of the Funing Formation are identified as the core factors driving in situ stress deflection, deepening the understanding of fracturing-induced response mechanisms in complex reservoirs. The results of this study provide reliable technical support for accurately assessing the fracturing performance of horizontal well Y108 and offer an innovative approach for optimizing the fracturing design of similar reservoirs, holding great theoretical and engineering value.
The Chiwawu Cu-Mo deposit is an important porphyry-hosted Cu-Mo mining area in the northern Taihang Mountains metallogenic belt. However, the prospecting work in this area has encountered bottlenecks in recent years. The geophysical exploration in the past was dominated by the induced polarization surveys, barely reaching the deep strata. Given this, this study conducted an audio magnetotelluric sounding, obtaining the electrical structure of the mining area. Electrical structures combining geological and drilling data can lead to the following conclusions: The low-resistivity anomalies beneath high-resistivity rock masses represent play fairways, while the shallow fault damage zones had a disruptive effect on ore bodies. Additionally, by setting the electrical principal axis orientation as an independent parameter, this paper analyzed the distribution characteristics of electrical principal axes along two profiles and their relationships with mineralization using the statistical imaging technique based on multi-site multi-frequency impedance tensor decomposition. The statistical results indicate continuous variations in the electrical principal axis orientation within a greater depth range along the Profile L3, suggesting the probable presence of deep-seated concealed small rock masses. This finding provides new insights for the application of the Audio-frequency Magnetotelluric (AMT) method in mineral exploration and offers guidance for the next phase of mineral search in the mining area. This study provides new insights into the application of the AMT method in mineral exploration and offers guidance for future prospecting in this mining area.
Polymetallic deposits, primarily porphyry-related polymetallic deposits, are hosted in eastern Hebei province in the northern margin of the North China Block. The study area, located in northeastern Chengde, is a typical rhyolite porphyry-hosted molybdenum-polymetallic deposit. Within this area, cryptoexplosive breccias, rhyolites, and the Archean biotite amphibole plagiogneisses are exposed on the surface. Based on previous data, it is speculated that the ore-bearing rhyolite porphyries occur beneath the cryptoexplosive breccias, with a burial depth generally exceeding 500 m. However, the deep-seated molybdenum-polymetallic deposits can barely be accurately located with traditional geophysical methods. Therefore, this paper used the audio magnetotelluric (AMT) method for the first time to locate the concealed porphyry-hosted molybdenum-polymetallic deposits in this area. Based on the low-resistivity characteristic of the molybdenum-polymetallic ores, and with
Gas reservoirs occurring within the Ordovician buried hills in the Qianmiqiao block of the Dagang oilfield have been identified for over two decades. However, the hydrocarbon accumulation model and enrichment patterns of these reservoirs remain unclear, leading to a torturous exploration and exploitation process, along with difficulties with the effective production of proven reserves. In recent years, with the advancement in related studies, researchers have gradually recognized the controlling effects of fractured-vuggy carbonate reservoirs on hydrocarbon accumulation and enrichment, changing the previous view of structurally controlled, layered hydrocarbon reservoirs. To predict fractured-vuggy reservoirs, this study employed high-accuracy 3D seismic data tailored to reservoir imaging. Through fine-scale reservoir calibration, the seismic responses of the fractured-vuggy reservoirs were determined. To achieve lateral identification of their planar positions and the vertical delineation of their top and bottom boundaries, this study conducted seismic facies identification and seismic facies-driven constrained sparse spike inversion (CSSI) by fully mining the reservoir information implicit in seismic data and innovating technical approaches. As a result, the spatial distribution of fractured-vuggy reservoirs was predicted. The prediction results, consistent with geological laws and aligning highly with actual drilling results, provide strong support for the selection, design, and deployment of efficient well locations in the fractured-vuggy carbonate reservoirs hosted by buried hills in the Qianmiqiao block. The results also serve as a reference for research on hydrocarbon reservoirs within buried hills in similar blocks of the Bohai Bay Basin.
The W Sag in the western South China Sea has been extensively explored. Consequently, most oilfields in the sag have transitioned into the medium to high water cut stage, facing challenges in tapping potential reserves and maintaining stable production. In this context, both hydrocarbon exploration in complex concealed reservoirs in the Paleogene strata and paleo-buried hills and fine-scale potential tapping in mature oilfields have become primary targets for reserve growth and production addition. However, under complex geological conditions, seismic exploration faces multiple issues, including complex seismic wavefields, weak seismic signals, low resolution, and strong anisotropy. To address the challenges encountered in the exploration and exploitation of complex reservoirs in the western South China Sea, this study investigated key technologies in terms of ghost wave suppression, multiple suppression, and high-precision velocity modeling. To this end, the characteristics of the acquired wide-azimuth ocean bottom cable (OBC) seismic data were considered, and the approach to broadening frequencies and preserving amplitude was followed. Consequently, a set of key technologies for processing the OBC seismic data of structurally complex areas was established, effectively improving the signal-to-noise ratio and imaging quality of seismic data. Application to actual data demonstrates that the technologies established in this study substantially enhanced seismic data quality, laying a solid foundation for the fine-scale geophysical characterization of complex reservoirs.
Fracability serves as a critical indicator for assessing whether the production of unconventional oil and gas reservoirs can be increased by fracturing. Besides, it also represents a key parameter for evaluating shale oil wells. Currently, fracability evaluation is primarily conducted using the brittleness index based on the lithology or rock elasticity. However, due to the diversity of lithology and pore combinations, the elasticity and fracability of reservoirs may vary significantly even under identical lithological conditions. To address this issue, targeting the complex lithologies and diverse pores of shale oil reservoirs in the second member of the Kongdian Formation, Cangdong Sag, Bohai Bay Basin, this study proposes a reservoir fracability evaluation model that integrates the elastic-based brittleness index, compressive strength, and fault toughness. First, using the velocity and density data in array acoustic log data, elastic mechanical parameters, including the elastic modulus, Poisson's ratio, and Young's modulus, are calculated. Second, in combination with laboratory test results, the relationship between static and dynamic elastic moduli is established. Accordingly, elastic parameters, rock mechanics parameters, and the elastic-based brittleness index are determined. Third, for well blocks lacking shear wave information in conventional log data, a method for estimating the shear wave velocities of shales and sandstones is developed based on the Xu-White model, porosity, and contents of various minerals in shales. This model enables the calculation of parameters for the engineering sweet spots of reservoirs. Finally, a typical well in the study area is selected to calculate its fracability index (FI), followed by a grading evaluation. The results of this study indicate that FI values of < 0.45, 0.45~0.55, and ≥ 0.55 represent a low, moderate, and high fracability, respectively. The zones with low, moderate, and high fracability delineated in the study area agree well with the actual hydraulic fracturing results. This study provides a novel thought and technical approach for evaluating engineering sweet spots in shale oil exploration.
Electromagnetic transmitters have been extensively applied in the exploration of geological structures and mineral resources. Their effectiveness and signal quality are directly governed by the performance of their power supply modules. To achieve high power density and high stability in electromagnetic transmitters, this study proposed a power factor correction (PFC) technique based on the critical conduction mode (CRM). This technique employs a composite control strategy that combines voltage loop feedback with inductor volt-second balance feedforward. By leveraging the resonance between the boost inductor and parasitic capacitance during the dead time, this technique enables zero voltage switching (ZVS) for all power switch tubes, thereby significantly reducing switching losses. Experimental results demonstrate that the designed PFC achieved the expected performance, yielding an efficiency of 95.4% and a power factor of 0.99. Overall, this technique can effectively enhance the performance of the power supply modules in electromagnetic transmitters, holding significant practical value.
Surface wave analysis, used to characterize near-surface shear-wave velocity structures, has been widely applied to various distinct fields. Extracting surface wave dispersion information serves as a significant step in surface wave analysis. Conventional methods for picking dispersion curves primarily include manual picking and semi-automatic picking in manually delineated dispersion energy zones. Given the large volume of seismic data used in oil and gas exploration, manual processing methods struggle to satisfy the requirements of practical production. Therefore, this study proposes a method for automatically picking multi-mode surface-wave dispersion curves based on an unsupervised machine learning approach. First, some background noise points in a dispersion spectrum are removed using energy threshold filtering. Second, different surface wave modes in the dispersion spectrum are determined using the energy density-based spatial clustering of applications with noise (E-DBSCAN) algorithm. Third, energy peaks in zones corresponding to different surface wave modes are searched, followed by noise elimination through Kalman filtering and smoothing. As a result, multi-mode dispersion curves are obtained. The proposed method incorporates dispersion energy values, offering high reliability. Numerical experiments demonstrate that the automatically picked dispersion curves accurately match the theoretical dispersion curves. Meanwhile, method comparison and field data tests further confirm the reliability of the proposed method.
Currently, full-waveform inversion (FWI) represents the velocity inversion and modeling technology with the highest accuracy. By continuously updating the velocity model through an iterative algorithm, FWI gradually minimizes the errors between forward modeling data and real data, thereby approaching the true velocity model. The primary challenge faced by FWI is cycle skipping, which occurs when the phase difference between forward modeling data and real data exceeds half a cycle. In this case, with the updating of the velocity model, the forward modeling data and real data will be incorrectly matched, causing the velocity model to converge in a wrong direction. In conventional least-squares FWI, the objective function considers merely the energy difference between forward modeling data and real data. In this case, cycle skipping can only be avoided as far as possible by using the low-frequency signals with high cycles in the data and a sufficiently accurate initial velocity model. This poses stringent demands for the quality of low-frequency signals in raw data and entails a substantial workload for the initial velocity modeling. To address this issue, this study proposes a time-lag FWI (TLFWI) method. In this method, the objective function is defined as the integral of the energy difference between forward modeling data and real data with respect to their time difference. In this manner, the objective function accounts for both the energy difference and time difference between forward modeling data and real data, enabling cycle skipping to be effectively avoided. In the case of weak low-frequency signals in raw data and large errors in the initial velocity model, TLFWI can still enable the velocity model to converge in the correct direction. Therefore, TLFWI reduces the dependence on low-frequency signals in raw data and decreases the workload for constructing the initial velocity model. The results of experiments on a theoretical velocity model and practical seismic data reveal that, compared to least-squares FWI, TLFWI can derive a more accurate velocity model under the condition of high errors in the initial velocity model. Notably, both least squares FWI and TLFWI used in this study are turning wave FWI. In other words, only turning waves in seismic data are used for matching in both methods, with reflected waves excluded.
Seismic-while-tunneling (SWT) detection, serving as a pivotal technology for mitigating the imbalance between mining and roadway tunneling in coal mines, enhances the tunneling efficiency by simultaneous seismic detection and roadway tunneling. However, due to constraints such as highly random seismic sources generated by tunnel boring machines and severe interference from strong underground background noise, data denoising and extraction of effective waves have remained as technical challenges. Hence, this study proposes a dynamic imaging method for SWT detection based on multi-algorithm joint denoising and wavefield separation. First, variational mode decomposition is introduced for the multi-scale decomposition and mode selection of raw seismic signals. In combination with the independent component analysis optimized by an improved artificial bee colony algorithm, a joint denoising model is constructed to deeply suppress complex mechanical and electromagnetic noise. Second, based on the cross-correlation principle, continuous random vibration records are reconstructed into virtual pulse source records, and strong direct waves are removed using singular value decomposition, thereby enabling the precise extraction of weak effective reflected waves. Third, the fine-scale characterization of geological structures along the sidewalls and ahead of the roadway is achieved using a diffraction-scanning migration imaging algorithm. By constructing a SWT advance detection model with dimensions of 300 m × 100 m × 200 m using a three-dimensional finite-difference algorithm for elastic waves, this study verified the capability of the proposed method to reconstruct effective wavefields in environments with low signal-to-noise ratios (SNRs). In the field application at mining face 51210 of the Guojiawan coal mine, the proposed method successfully delineated concealed faults along the roadway sidewall, with the interpretation results highly consistent with borehole verification data. Therefore, the proposed method effectively overcomes the challenge of low SNRs in SWT detection, providing robust technical support for the real-time monitoring of hidden disaster-causing factors and intelligent rapid excavation of roadways in coal mines.
As mineral exploitation is gradually shifting to complex terrain areas, the traditional transient electromagnetic (TEM) method has encountered challenges such as inconvenient deployment and low efficiency in these areas. In contrast, the semi-airborne TEM (SATEM) method, which combines a ground-based transmitter and an airborne receiver, can significantly improve data acquisition efficiency and adaptability in complex areas. However, due to the undulating terrains, the grounded source often deviates from the ideal straight-line pattern. The geometrical distortion effects of the grounded source on electromagnetic responses remain under-studied. Through 3D finite-element forward modeling, this study systematically analyzed the electromagnetic field distortions caused by the curvature and vertical undulation of the grounded source under typical undulating terrains, such as mountain peaks and valleys. The results indicate that the non-ideal geometry of the grounded source is the primary cause of early asymmetric electromagnetic responses and false anomalies. Mountain peaks concentrate the electromagnetic energy in the shallow parts of the mountains, suppressing the detection depth, whereas valleys enhance subsurface coupling due to the lower position of the grounded source, thus expanding the early detection range. More importantly, adopting a terrain-following flight line (i.e., maintaining a constant receiver height relative to the ground surface) can effectively mitigate the false anomalies of apparent resistivity caused by the geometrical distortion of the grounded source and the terrain coupling. Accordingly, this study proposes a SATEM-optimized data acquisition scheme for complex terrains, providing theoretical support and technical guidance for improving the accuracy of deep resource exploration.
To ascertain the contamination range and degree caused by the migration of the chromium contamination field, this study constructed a net reserve-based model for chromium contamination sources in water-rich soils of a permeable layer with high permeability coefficients. Based on the COMSOL software, the migration patterns of the heavy metal contaminant—chromium over time were numerically simulated. Targeting the migration model of the chromium contamination field in different periods, the Wenner, dipole-dipole, and pole-dipole arrays were used for detection, respectively. Through multi-constraint joint inversion of resistivity and polarizability, this study comparatively analyzed the resistivity and polarization imaging effects of different detection arrays. The inversion results show that under noise-free voltage conditions, the detection depths of these detection arrays decreased in the order of pole-dipole, dipole-dipole, and Wenner arrays. The Wenner array yielded better resistivity imaging effects relative to polarization imaging. The dipole-dipole array is suitable for detecting the shallow, small-scale contamination field featuring a complex morphology. The pole-dipole array outperformed others in shallow detection. With a mean disturbance voltage of 7 mV applied, the anti-noise performance of the detection arrays showed descending order of Wenner, dipole-dipole, and pole-dipole arrays, with the apparent polarizability consistently affected less than the apparent resistivity.
Seismic-while-tunneling (SWT) detection tends to encounter challenges including unstable imaging, excessive artifacts, limited target-background contrast, and poor positioning accuracy. To address these issues, this study proposed a dynamic imaging technology based on an improved diffraction-scanning migration imaging (DSMI) method: TA-DSMI. By introducing a true-amplitude weighting function into the DSMI imaging kernel, the TA-DSMI constructs a physically interpretable weighting system consisting of geometric spreading compensation, incident/scattering angle consistency, mild frequency band/absorption compensation, and robust noise suppression. The weighting system is then coupled with an end-to-end process that involves pre-whitening, sliding window stacking, fine-scale scanning of the region of interest (ROI), and local normalization. Consequently, the TA-DSMI achieves minute-level refreshing without significantly increasing the computational overhead. The results indicate that compared to the DSMI, the TA-DSMI improved the contrast-to-noise ratio (CNR) by about 3 dB and reduced the peak positioning error of anomalous bodies by about 1.5 m, with a single imaging time of ≤5 min. Overall, the TA-DSMI significantly enhances the physical consistency and interpretation reliability of SWT dynamic imaging, providing an engineering-feasible technology pathway for real-time advanced identification and spatiotemporal tracking of concealed discontinuities.
By integrating multi-source radioactivity survey data and using Geodetector, this study explored the spatial variations of the gamma radiation field at the ground-air interface and their influence mechanisms in the Pearl River Delta economic zone. The results indicate that key factors influencing the distribution of the radiation field include soil radon concentration (q=0.852), 238U content (q= 0.816), and 232Th content (q=0.803). Besides, formation lithology (q=0.791), fault structures (q=0.786), and chronostratigraphy (q =0.778) also play a significant role. The interaction detection indicates that the synergy of soil radon concentration and fault structures demonstrates the strongest explanatory power (q=0.875), suggesting the mechanism of structure-controlled transport and soil-controlled accumulation. Risk detection demonstrates that high-radiation radon contributors include normal faults, magmatic rocks, and Jurassic strata. The results of this study reveal that the spatial distribution of the radiation field is governed by a three-level system comprising nuclide content as a direct source, lithology and chronostratigraphy as carriers, and fault structures as pathways for radon transport.The research results have provided a scientific basis for regional radiation environmental risk assessment and pollution prevention and control.
Insufficient selenium intake in China has received widespread attention. Nationwide land quality geochemical surveys have shown that selenium contents are relatively high in the mountainous areas of southwestern China. However, the sources of selenium and the factors influencing its enrichment in these areas remain unclear. In this study, Muchuan County, which has favorable selenium-rich conditions in the Wumeng mountainous area, was selected as the study area. A random forest model and SHAP method were used to investigate soil selenium content and its influencing factors by integrating environmental variables, including elevation (EL), annual mean land surface temperature (LST), precipitation (Prec), parent material (PMT), and soil physicochemical properties. The results showed that the mean selenium content in the soils of Muchuan County was 0.38×10−6, which was 1.8 times the background value of soils in China, indicating an overall relatively high level. The area of land with relatively abundant selenium and above was 703.59 km2, accounting for 49.99% of the total area, indicating good potential for selenium-rich land resources. The random forest model showed good predictive performance, with R2 values of 0.84 and 0.76 for the training and test sets, respectively. SHAP analysis showed that SOM was the dominant factor controlling the variation in Se content. Areas with high EL, SOM, and Mn were favorable for Se enrichment, whereas high Prec, LST, and pH promoted Se leaching.The research suggests that the Se enrichment in the surface soil of Muxian County is jointly controlled by the parent material of the soil, topography, climate and soil physical and chemical properties. Among them, SOM has the most significant effect on Se retention. The results of this study can provide certain basis for the evaluation and development and utilization of selenium-rich land resources in the Wumeng Mountainous Area.
Selenium-rich land resources are increasingly attracting public attention; however, the methodology for their selection and prioritization remains under-studied. Using the geochemical survey data of land quality in Shucheng County, Anhui Province, this study delineated the distinctive selenium-rich land in the study area in accordance with the Delineation and Logo of Natural Selenium-rich Land (DZ/T 0380—2021). A total of seven relatively contiguous selenium-rich land plots were identified. By comprehensively analyzing the key factors that constrain the resource endowment, development, and utilization of selenium-rich land, this study established a methodological and technical indicator system for prioritizing and grading selenium-rich land. Based on this system, the seven selenium-rich land plots in the study area were prioritized and graded, with four selected for further verification, yielding favorable results. One of the four selenium-rich land plots was included in the fifth batch of natural selenium-rich land plots recognized by the Geological Society of China. Overall, this study provides technical support for the evaluation, delineation, development, and utilization of selenium-rich land resources in Shucheng County, as well as a methodological and technical framework for similar work in China.
To address the challenges faced by the advanced detection of geological structures right ahead of the mining face during roadway tunneling, this study investigated the feasibility of in-seam seismic exploration technology. Based on theoretical foundation and data processing methods of seam wave-based advanced detection, as well as simulations using the high-order staggered-grid finite-difference algorithm, this study compared the fault detection accuracy of three imaging methods: envelope stacking, diffraction migration, and elliptical arc migration. The results indicate that for faults with high dip angles, the envelope stacking method fails to represent the true fault locations, necessitating migration correction for accurate spatial positioning. Additionally, the accuracy of the imaging velocity significantly affects the imaging results. In the case of an identical velocity error, the diffraction migration method outperforms in revealing fault locations during roadway tunneling, while the elliptical arc migration method exhibits superior performance in determining fault strikes. The practical application demonstrates that in areas with high-quality seam wave data, all three imaging methods can effectively detect faults in advance. For areas with low-quality seam wave data, the combination of envelope stacking and migration correction is recommended for fault imaging. This study provides a significant technical reference and methodological guidance for seam wave-based advanced detection, indicating that the proposed method can provide a reliable basis for the adjustment of roadway tunneling plans, as well as the prevention and control of geological hazards.
The detection of unexploded ordnance (UXO) is a significant research topic in environmental and engineering geophysics. Magnetic survey serves as an economical, efficient, safe, and reliable geophysical method. However, current methods for UXO detection based on magnetic survey remain limited by low automation levels and significant redundant solutions. To address these limitations, this study proposed a UXO detection method for high-precision magnetic data based on the normalized source strength (NSS) theory. In the proposed method, magnetic anomaly data were first transformed into NSS data. Subsequently, an improved Euler deconvolution technique was applied to the NSS data to estimate the spatial location and structural index of the field source. Model tests and field data processing results demonstrate that the proposed method achieved a high level of automation and fewer redundant solutions.