收藏切换
A fractureability evaluation model based on brittleness, fracture toughness, and compressive strength and its application
收藏切换
Yu-Jiao DING1, Jin-Song SHEN2, *, Shu-Wen LIU2, Shuai SUN2, Feng-Ming JIN3, Xiu-Gang PU1
Geophysical and Geochemical Exploration | 2026, 50(3) : 489 - 499
Less
收藏切换
Geophysical and Geochemical Exploration | 2026, 50(3): 489-499
A fractureability evaluation model based on brittleness, fracture toughness, and compressive strength and its application
Full
Yu-Jiao DING1, Jin-Song SHEN2, *, Shu-Wen LIU2, Shuai SUN2, Feng-Ming JIN3, Xiu-Gang PU1
Affiliations
  • 1Dagang Oilfield Exploration and Development Research Institute, CNPC, Tianjin 300280, China
  • 2College of Geophysics,China Petroleum University(Beijing), Beijing 102249, China
  • 3Dagang Oilfield, CNPC, Tianjin 300280, China
Published: 2026-06-10 doi: 10.11720/wtyht.2026.0018
Outline
收藏切换

Fracability serves as a critical indicator for assessing whether the production of unconventional oil and gas reservoirs can be increased by fracturing. Besides, it also represents a key parameter for evaluating shale oil wells. Currently, fracability evaluation is primarily conducted using the brittleness index based on the lithology or rock elasticity. However, due to the diversity of lithology and pore combinations, the elasticity and fracability of reservoirs may vary significantly even under identical lithological conditions. To address this issue, targeting the complex lithologies and diverse pores of shale oil reservoirs in the second member of the Kongdian Formation, Cangdong Sag, Bohai Bay Basin, this study proposes a reservoir fracability evaluation model that integrates the elastic-based brittleness index, compressive strength, and fault toughness. First, using the velocity and density data in array acoustic log data, elastic mechanical parameters, including the elastic modulus, Poisson's ratio, and Young's modulus, are calculated. Second, in combination with laboratory test results, the relationship between static and dynamic elastic moduli is established. Accordingly, elastic parameters, rock mechanics parameters, and the elastic-based brittleness index are determined. Third, for well blocks lacking shear wave information in conventional log data, a method for estimating the shear wave velocities of shales and sandstones is developed based on the Xu-White model, porosity, and contents of various minerals in shales. This model enables the calculation of parameters for the engineering sweet spots of reservoirs. Finally, a typical well in the study area is selected to calculate its fracability index (FI), followed by a grading evaluation. The results of this study indicate that FI values of < 0.45, 0.45~0.55, and ≥ 0.55 represent a low, moderate, and high fracability, respectively. The zones with low, moderate, and high fracability delineated in the study area agree well with the actual hydraulic fracturing results. This study provides a novel thought and technical approach for evaluating engineering sweet spots in shale oil exploration.

engineering sweetness spot  /  brittleness index  /  elastic parameters  /  fracturing toughness  /  fracability index
丁娱娇, 沈金松, 刘树文, 孙帅, 金凤鸣, 蒲秀刚. 基于脆性、断裂韧性和抗压强度的可压裂性评价模型及应用. 物探与化探, 2026 , 50 (3) : 489 -499 . DOI: 10.11720/wtyht.2026.0018
Yu-Jiao DING, Jin-Song SHEN, Shu-Wen LIU, Shuai SUN, Feng-Ming JIN, Xiu-Gang PU. A fractureability evaluation model based on brittleness, fracture toughness, and compressive strength and its application[J]. Geophysical and Geochemical Exploration, 2026 , 50 (3) : 489 -499 . DOI: 10.11720/wtyht.2026.0018
Year 2026 volume 50 Issue 3
95
46
Cite this Article
BibTeX
Article Info
doi: 10.11720/wtyht.2026.0018
  • Receive Date:2026-01-19
  • Online Date:2026-11-12
  • Published:2026-06-10
Article Data
Affiliations
History
  • Received:2026-01-19
  • Revised:2026-04-17
Affiliations
    1Dagang Oilfield Exploration and Development Research Institute, CNPC, Tianjin 300280, China
    2College of Geophysics,China Petroleum University(Beijing), Beijing 102249, China
    3Dagang Oilfield, CNPC, Tianjin 300280, China
References
Share
https://castjournals.cast.org.cn/joweb/wtyht/EN/10.11720/wtyht.2026.0018
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT