收藏切换
Comparative study and application of two FWI methods for turning waves
收藏切换
Bing-Gang WANG1, Cheng-Zhen DING1, Jian-Lu WU2, Xiang LI1, Qing-Yu DONG1, Dan ZHANG1
Geophysical and Geochemical Exploration | 2026, 50(3) : 516 - 524
Less
收藏切换
Geophysical and Geochemical Exploration | 2026, 50(3): 516-524
Comparative study and application of two FWI methods for turning waves
Full
Bing-Gang WANG1, Cheng-Zhen DING1, Jian-Lu WU2, Xiang LI1, Qing-Yu DONG1, Dan ZHANG1
Affiliations
  • 1Geophysical Research Institute, BGP Inc., CNPC, Zhuozhou 072750, China
  • 2R & D Center, BGP Inc., CNPC, Zhuozhou 072750, China
Published: 2026-06-10 doi: 10.11720/wtyht.2026.1437
Outline
收藏切换

Currently, full-waveform inversion (FWI) represents the velocity inversion and modeling technology with the highest accuracy. By continuously updating the velocity model through an iterative algorithm, FWI gradually minimizes the errors between forward modeling data and real data, thereby approaching the true velocity model. The primary challenge faced by FWI is cycle skipping, which occurs when the phase difference between forward modeling data and real data exceeds half a cycle. In this case, with the updating of the velocity model, the forward modeling data and real data will be incorrectly matched, causing the velocity model to converge in a wrong direction. In conventional least-squares FWI, the objective function considers merely the energy difference between forward modeling data and real data. In this case, cycle skipping can only be avoided as far as possible by using the low-frequency signals with high cycles in the data and a sufficiently accurate initial velocity model. This poses stringent demands for the quality of low-frequency signals in raw data and entails a substantial workload for the initial velocity modeling. To address this issue, this study proposes a time-lag FWI (TLFWI) method. In this method, the objective function is defined as the integral of the energy difference between forward modeling data and real data with respect to their time difference. In this manner, the objective function accounts for both the energy difference and time difference between forward modeling data and real data, enabling cycle skipping to be effectively avoided. In the case of weak low-frequency signals in raw data and large errors in the initial velocity model, TLFWI can still enable the velocity model to converge in the correct direction. Therefore, TLFWI reduces the dependence on low-frequency signals in raw data and decreases the workload for constructing the initial velocity model. The results of experiments on a theoretical velocity model and practical seismic data reveal that, compared to least-squares FWI, TLFWI can derive a more accurate velocity model under the condition of high errors in the initial velocity model. Notably, both least squares FWI and TLFWI used in this study are turning wave FWI. In other words, only turning waves in seismic data are used for matching in both methods, with reflected waves excluded.

turning wave time-lag full-waveform inversion(FWI)  /  turning wave least-squares FWI  /  cycle skipping  /  low-frequency signal  /  initial velocity model  /  depth migration
王丙钢, 丁成震, 吴建鲁, 李翔, 董庆宇, 张丹. 两种回转波FWI方法对比研究和应用. 物探与化探, 2026 , 50 (3) : 516 -524 . DOI: 10.11720/wtyht.2026.1437
Bing-Gang WANG, Cheng-Zhen DING, Jian-Lu WU, Xiang LI, Qing-Yu DONG, Dan ZHANG. Comparative study and application of two FWI methods for turning waves[J]. Geophysical and Geochemical Exploration, 2026 , 50 (3) : 516 -524 . DOI: 10.11720/wtyht.2026.1437
Year 2026 volume 50 Issue 3
85
38
Cite this Article
BibTeX
Article Info
doi: 10.11720/wtyht.2026.1437
  • Receive Date:2025-12-30
  • Online Date:2026-11-12
  • Published:2026-06-10
Article Data
Affiliations
History
  • Received:2025-12-30
  • Revised:2026-03-31
  • Accepted:2026-04-03
Affiliations
    1Geophysical Research Institute, BGP Inc., CNPC, Zhuozhou 072750, China
    2R & D Center, BGP Inc., CNPC, Zhuozhou 072750, China
References
Share
https://castjournals.cast.org.cn/joweb/wtyht/EN/10.11720/wtyht.2026.1437
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT