ArchiveFourier methods have found wide application in seismic wavefield continuation due to their high computational efficiency. However, these methods are insufficient to deal with media with lateral velocity variations. In contrast, the split-step Fourier, Fourier finite-difference, and generalized-screen migration can significantly improve the accuracy of wavefield simulation and imaging by combining the continuation in the frequency-wavenumber and spatial domains. By inheriting the high computational efficiency of Fourier methods, the one-way wave migration imaging method further optimizes the algorithm design and numerical implementation. This method significantly enhances the adaptability and imaging quality of complex media, suggesting significant application value. This study systematically reviews the fundamental principles and research status of one-way wave migration imaging, summarizes its research progress from six perspectives, and proseses its development trends. The purpose is to provide a reference for further research and application of seismic imaging technology.
The Xinlong-Langmeila ore district, located in the middle segment of the central Lhasa Terrane in Tibet, holds considerable potential for mineralization. However, the extension of deep ore bodies and fault zones in the ore district remains poorly understood, posing a challenge to subsequent ore prospecting. This study aims to ascertain the strikes of ore bodies, as well as the distributions of deep faults and concealed deposits. Given that the galena-gersdorffite-gold and pyrite-gold-quartz assemblages predominate in the ore district, this study performed an integrated geophysical exploration by combining induced polarization (IP) central gradient array survey, IP sounding, and audio-frequency magnetotellurics (AMT). In combination with drilling and geological data, this study determined the locations and strikes of ore bodies, delineated IP anomalies and favorable prospecting targets, and identified ore-controlling fault structures. The results of this study demonstrate that integrated geophysical exploration is feasible for gold deposit exploration while also providing a valuable reference for ore prospecting under similar geological conditions. geological conditions.
This study aims to reveal the source of salts in the soda saline-alkali land in the western Songnen Plain. Focusing on Taonan City under the administration of Baicheng City in Jilin Province, this study systematically investigated the weathering and saline-alkali ion release characteristics of pyroclastic rocks, granites, and sandstones along the eastern margin of the Great Xing'an Range. The results indicate that rocks in the study area remain in the early-to-middle stage of chemical weathering, predominantly releasing Ca, K, Na, and Si. The loss of saline-alkali ions per unit mass of the rocks decreases in the order of pyroclastic rocks, sandstones, and granites. When migrating from high-elevation hills to low-lying plains, groundwater is enriched in substantial Na+ and HCO3−, accompanied by a slight increase in the K+ content and loss of Ca2+, SO42−, Cl−, and Mg2+ ions, with the pH value elevated. The results demonstrate that the weathering of plagioclases in pyroclastic rocks contributes largely to salinization and alkalization. Furthermore, the early-to-middle chemical weathering represents the key process of the release of saline-alkali ions, while topography-driven water and salt migration emerges as the dominant path of ion enrichment. The results of this study provide a scientific basis for the precise prevention and control of regional saline-alkali land and ecological restoration.
Subsurface brine in the Zigong area of the Sichuan Basin contains salt and is also enriched in critical metal lithium, primarily occurring in the axial parts of anticlines. After years of exploitation, the Zigong area is now facing scarce brine resources and difficulty in reserve replacement. Fold flanks in the area may hold considerable resource potential; however, there is a lack of studies on deep brine exploration along fold flanks. This study investigated deep subsurface brine in the Tiejianggou and Xiangyangwan zones, which are located along anticlinal and synclinal flanks in the Zigong area, respectively. Petrophysical investigation and wide-field electromagnetic exploration reveal significantly varying deep electrical properties in both zones. Based on stratigraphic and structural constraints, this study performed comprehensive interpretations of deep electrical structures and low-resistivity anomalies in both zones. The results indicate that a 1500-m-deep profile in both zones exhibits significant electrical zonation characterized by low resistivity in the upper part and high resistivity in the lower part. The interval spanning from the lower part of the Xujiahe Formation to the upper part of the Leikoupo Formation is identified as a favorable exploration target. Layered, quasi-layered, or elliptical low-resistivity anomalies are identified in both zones, corresponding well to the occurrence horizons of regionally proven yellow brine. Drilling results of the Tiejianggou zone further verify the reliability of the geological anomaly interpretation. The findings lead to the conclusion that fold flanks also exhibit favorable conditions for the enrichment and preservation of subsurface brine, representing an important replacement for deep brine prospecting in the Zigong area. The results of this study provide novel insights for both resource exploration in the periphery of mature salt-producing areas and the investigation of the occurrence patterns of subsurface brine.
In some blocks of the Ordovician carbonate reservoirs in the Tahe Oilfield, the development has entered the middle and late stages, and the oil-water relationship is extremely complex, with a high risk of drilling. To solve the problem of predicting the distribution of remaining oil, a research and development experiment on detecting remaining oil using time-frequency electromagnetic methods has been carried out in the TH10X well area of the Tahe Oilfield. Aiming at the characteristics of strong heterogeneity in fractured-vuggy carbonate reservoirs, high-quality three-dimensional electromagnetic data have been obtained through the excitation of dual-source electromagnetic fields that are perpendicular to each other and three-dimensional data collection with an array of 100 m×100 m. On this basis, the resistivity-constrained inversion, polarizability-constrained inversion, and differential anomaly extraction have been carried out, and resistivity, polarizability anomalies, and dual-frequency phase differential anomalies in the study area was obtained. Finally, the production data of the actual drilled wells was used for calibration, and the potential areas of remaining oil distribution have been delineated. Later drilling verification has shown that there is abundant remaining oil at the No. 2 potential point, confirming the effectiveness of the method.
The Bijiashan antimony deposit represents a medium- to low-temperature hydrothermal deposit. Based on the geological characteristics and electrical properties of the deposit, and employing the audio-frequency magnetotelluric (AMT) method, this study detected and analyzed the deep geological structures along the periphery of the deposit, thus effectively identifying the electrical and structural characteristics of the deposit in the subsurface space. Specifically, an AMT-based theoretical model of mineralization (prospecting) was constructed for the deposit. An AMT-based prospecting criterion was determined for the deposit: the anticlinal axis and the transition zones of anticlinal flanks (i.e., interlayer fracture zones) are located on the middle- to high-resistivity contact zone, which exhibits a saddle-shaped distribution on the section. Accordingly, the distribution of the anticlinal core, characterized by steep western and gentle eastern portions, was identified. The anticlinal axis and interlayer fracture zones were accurately localized. Their locations were presumed to be favorable areas for mineralization. The drilling verification of geophysical anomalies reveals the concealed antimony mineralized bodies, marking a breakthrough in deep mineral prospecting and proving the feasibility of the AMT method. Overall, the results of this study demonstrate that the AMT method is an effective geophysical technique in exploring the Bijiashan antimony deposit and other similar deposits.
The tight sandstone reservoirs of the braided river delta facies in the Xujiahe Formation of the Sichuan Basin represent a critical target for the reserve growth and production addition of hydrocarbons. In the TJ area, the Xujiahe Formation exhibits deep burial depths, complex lithologies, unconfirmed petrophysical patterns of dominant lithofacies, and rapid lateral variations in reservoirs, which jointly limit the reservoir prediction accuracy. This study aims to address the challenges in reservoir prediction. First, considering the impacts of multi-mineral components, a generalized Xu-White petrophysical model was developed to accurately determine the factors for lithologic and reservoir identification. Then, using a reflectivity objective function with time-offset dual constraints developed in this study, the amplitude versus offset (AVO) reflectivity extraction method was improved, contributing to the acquisition of accurate ternary reflectivity volumes. Accordingly, high-resolution prestack elastic parameter volumes were determined through Bayesian inversion. Finally, the distribution of sandstone reservoirs was predicted thoroughly by combining factors for lithologic and reservoir identification, as well as high-resolution prestack inversion results. The improved AVO reflectivity inversion accurately predicted the distribution of sandstones and reservoirs in the TJ area, delivering satisfactory performance in predicting highly heterogeneous tight sandstone reservoirs. This study provides a novel approach to prestack prediction of tight sandstone reservoirs.
Faults act as critical migration pathways and reservoir space for hydrocarbons. Therefore, accurate fault identification is an important prerequisite for breakthroughs in hydrocarbon exploration. However, conventional manual interpretation suffers from low efficiency, while prediction based solely on artificial intelligence (AI) depends on massive data annotations and lacks geological constraints. In this context, this study developed a geologically constrained semi-supervised AI technique for fault prediction. For this technique, geological insights were transformed into quality control constraints, and a closed-loop process consisting of machine prediction, manual supervision, and model optimization was designed. With a small number of annotations as anchors, this technique allowed for the efficient extraction of multi-scale fault features by combining an improved ResUnet-19A network. Through few-shot and transfer learning, the resulting model can rapidly adapt to a new survey area, significantly improving prediction accuracy and efficiency while substantially reducing labor costs. The practical application in the Chishui area of the southeastern Sichuan Basin indicates that the proposed technique can effectively overcome the limitations of both conventional and pure AI approaches, offering an efficient and reliable solution for fault identification in hydrocarbon exploration within complex areas.
In this study, a modified wild horse optimizer (MWHO) algorithm characterized by a strong evolutionary capability, a faster search speed, and an enhanced optimization ability was introduced into the inversion of Cole-Cole model parameters using the time-domain induced polarization method. The performance of the MWHO algorithm was verified using known models, followed by a comparative study on the derived model parameters. In the case where the time window number and time delay were set at 8 or above and 100~250 ms, respectively, Cole-Cole model parameters with a maximum error of 0.03% were achieved through inversion using the MWHO algorithm. Furthermore, this algorithm exhibited a rapid computation speed and high result stability. Further verification using measured data indicates high consistency among the inverted values of frequency correlation coefficient (c), chargeability (m), and time constant (τ). The inversion results of measured data exhibited low-amplitude frequency correlation coefficient anomalies, high-amplitude chargeability anomalies, and high-amplitude time constant anomalies. These characteristics suggest the presence of metal sulfide ore (mineralized) bodies with a high mineralization degree, high metallic mineral contents, uneven mineralized particles, and high interconnectivity of conductive minerals. Drilling results reveal that siltstones with pyrite alteration occur at depths ranging from 45.08 m to 45.88 m. Disseminated and veinlet pyrite are continuously distributed along fractures. Furthermore, gold mineralization is visible, with gold grade reaching the industrial grade. The inversion results are roughly consistent with the drilling results. Therefore, the MWHO algorithm can be effectively applied to the inversion of Cole-Cole model parameters. Furthermore, this algorithm can distinguish weak induced polarization anomalies, thereby significantly enhancing the resolution of geobodies and highlighting ore-related anomalies. The proposed MWHO algorithm delivers high performance in identifying metal sulfide anomalies, warranting further research and widespread application.
The marine controlled-source electromagnetic (MCSEM) system has recorded extensive state data, such as depths, attitudes, and GPS information, during sea trials. Investigating its potential problems will serve as a significant reference for subsequent optimization and improvement. Therefore, by leveraging the advantages of Matlab and Python, and with the aid of new techniques, this study analyzed the recently acquired MCSEM data from sea trials, especially the state data. Besides the utilization of the built-in plotting functions of Matlab, the Robotics Toolbox was employed to simulate the three-axis rotation of underwater towed bodies. The full GPS trajectory playback was enabled by custom functions. The advantageous modules of Python facilitated data visualization, 3D attitude simulation of towed bodies, and single-point playback of navigation survey lines. Given the advanced functions of Python, Python-based data playback applications can provide novel insights for the MCSEM monitoring system. Harnessing the respective strengths of multiple programming languages renders data visualization results more intuitive and information retrieval more convenient, providing a new perspective for system upgrade and optimization.
This study investigated methods for the calculation and one-dimensional (1D) inversion of whole-zone apparent resistivity using the AB-Hz ground-airborne electromagnetic frequency sounding method. The purpose is to improve the accuracy and efficiency of electromagnetic frequency sounding and provide technical support for the high-efficiency exploration of deep subsurface resources. The AB-Hz ground-airborne electromagnetic frequency sounding method enables subsurface detection by exciting an electromagnetic field using a ground electric dipole source AB and measuring the vertical component Hz via unmanned aerial vehicle (UAV)-based observations. This study investigated the characteristics of frequency sounding curves of the whole-zone apparent resistivity under different transmitter-receiver distances. Two iterative calculation methods were established for the whole-zone apparent resistivity of the AB-Hz ground-airborne electromagnetic frequency sounding using the analytical expression of the Hz component of the electromagnetic field generated by a horizontal electric dipole (HED) source. Based on the equivalent resistivity principle, the correctness of the two methods was verified by calculating the H- and K-type geoelectric models using the dual-frequency method. To achieve the multi-parameter nonlinear optimization in 1D inversion, this study introduced an improved differential evolution algorithm and proposed a four-step mutation method to enhance the influence of the optimal solution. These efforts contributed to enhanced global optimization performance. Numerical simulation results show that the inversion results were close to the true values of the models, with a high goodness of fit, verifying the effectiveness of the proposed inversion method. The AB-Hz electromagnetic frequency sounding method exhibited pronounced responses to both low- and high-resistivity target geobodies, with larger transmitter-receiver distance corresponding to more distinct responses to targets. The proposed method can provide a technical solution for exploring inaccessible areas, such as deeply incised mountainous areas.
This study aims to overcome the severe electromagnetic coupling interference in high-power exploration conducted using the time-domain induced polarization (TDIP) method. Specifically, using a three-dimensional finite element method based on Green's function, the forward modeling of direct current resistivity was performed. In combination with an improved Talbot's inverse Laplace transform, the time-varying resistivity of the Cole-Cole model was calculated.Accordingly, a complementary acquisition geometry with a combined source array composed of electric dipoles was constructed. Numerical simulation results indicate that compared to a conventional central gradient array, the combined source array enhanced the electromagnetic coupling suppression effect by 10~20 times. Concurrently, a low-noise observation window was formed at the center of the polarity-reversal layout, significantly increasing the effective signal time range. Notably, the bilateral power supply configuration demonstrated a high resolution for anomalies in typical theoretical models. This study can provide theoretical support for the efficient exploration using the TDIP method under complex geological conditions.
Detecting pile foundation depths is essential for engineering construction in urban areas. However, traditional approaches for this detection mostly exhibit insufficient accuracy. Pile foundations are primarily composed of concrete and steel bars, displaying distinct electrical conductivity from the background values. Electrical methods are sensitive to subsurface conductivity variations, thus providing a novel approach for detecting pile foundation depths. Focusing on typical pile foundations used in the engineering construction of Guangzhou Metro, this study evaluated the effectiveness of dipole-dipole and Wenner configurations in detecting pile foundation depths through numerical simulations. Furthermore, the pile foundation depths were predicted using a random forest model. The results indicate that both configurations could detect the potential differences and apparent resistivity responses of pile foundations at burial depths not exceeding 30 m. After training with
The analysis and interpretation of ground-penetrating radar (GPR) echo signals mostly rely on the experience of professionals and are thus highly subjective, affecting detection efficiency and accuracy. To address the challenge of poor imaging quality induced by the indistinct cavity signal features after rebar signal suppression, this study proposes a layered frequency-domain range migration imaging algorithm that combines deconvolution filtering and curvelet transform. Specifically, to compress the side lobes of wavelets and enhance the characteristics of weak reflected signals, deconvolution filtering is incorporated into data preprocessing, thus focusing the reflected energy along cavity boundaries. To retain the details of curve edges and improve imaging quality, the curvelet transform is employed. The proposed algorithm, which combines both, allows for the effective characterization of the geometric features of cavity targets while highlighting the dominant frequency components of signals, thereby enhancing imaging quality.
To achieve high-quality mapping between surface 2D gravity anomaly observations and subsurface three-dimensional (3D) density geological bodies, this paper proposes a novel deep learning network architecture—Fusion Kernel Attention Network (FKANET). Compared to conventional neural network models previously used for 3D gravity inversion, FKANET can improve the inversion accuracy of both geometry and density amplitude of subsurface 3D density geological bodies while significantly reducing the number of network parameters. Furthermore, to address the widespread noise in actual gravity anomaly observations, this study reconstructs an improved network model based on a multi-task framework using the FKANET architecture, aiming to achieve simultaneous inversion and denoising of noisy data. Both tasks share the same encoder to extract gravity anomaly features from the raw gravity anomaly observations. In contrast, two independent decoders are used to perform denoising and 3D geological body inversion individually. Besides the adaptive denoising capability to effectively suppress the noise interferences in gravity anomaly observations, this multi-task framework poses sufficient constraints on the inversion process to enhance the model's ability to resolve subsurface 3D density geological bodies. These characteristics collectively enhance the stability and accuracy of inversion results. This method was applied to the inversion of field data from the Sannicolas region in central Mexico, demonstrating that the multi-task FKANET can achieve high-precision, real-time inversion of geological boundaries and density while also exhibiting excellent noise immunity.
In current geochemical surveys of stream sediments, manual sampling point arrangement predominates. However, manual arrangement faces several challenges, including heavy workload, high subjectivity, and insufficient control over river basin coverage. Moreover, the lack of effective quality inspection after sampling point arrangement renders it difficult to ensure the rationality of the arrangement. These issues affect field operations and the reliability of subsequent geochemical interpretations. Using the ArcGIS system, this study implemented computer automation-based scientific sampling point arrangement as per the geometric characteristics (e.g., order and length) of streams. Furthermore, a model for the verification of sampling point rationality was developed to assess the rationality of the distribution and sampleability of the automatically arranged sampling points. The proposed method was applied to the sampling point arrangement of stream sediments in the Majiagou area within the 1∶
This study investigated the compensated neutron log (CNL) responses of cased holes placed in hydrogen storage strata, aiming to quantify the impacts of casing on neutron porosity measurements, with emphasis placed on hydrogen-bearing strata. Using the Monte Carlo numerical simulation method, the models of open and cased holes were constructed to simulate the CNL responses under varying porosity and hydrogen saturation conditions. Furthermore, the relationship between the neutron count ratio from long- to short-distance detectors and the formation hydrogen index (HI) was analyzed. The analytical results indicate that the application of the casing and cement sheath may lead to an underestimation of the apparent HI in the cased hole, with the offset showing a non-linear increase with formation porosity and hydrogen saturation. Based on this, a fitting model incorporating formation porosity, hydrogen saturation, and HI offset was established, yielding a fitting accuracy of 0.9936. Therefore, this model enables effective quantification of the HI offset induced by casing under the condition of varying porosity and hydrogen saturation. Overall, the results of this study can provide a theoretical basis for interpreting the CNL data from cased holes placed in hydrogen storage strata.
Investigating the migration and accumulation of heavy metals in the soil-crop-human system is of great significance for assessing the degree of regional heavy metal accumulate, potential ecological risks, and human health impacts. Based on data from 1∶50,000 eco-geochemical surveys, this study examined the heavy metal contents in the soil-crop-human system and associated health risks in the Shuangyang River basin. The results indicate the enrichment of some heavy metals in soil samples, although their contents fell below the risk screening levels of soil contamination. Heavy metal contents in crop seeds all complied with national food safety standards. Heavy metal contents in women's hair were generally higher than those in men's hair. In some samples, the cadmium (Cd) or mercury (Hg) content exceeded the reference range, showing relatively rich characteristics. In terms of age, the highest heavy metal contents were observed in people aged 41~50, while those of other age groups exhibited decreased heavy metal contents to varying degrees. Crops showed bio-concentration factors (BCF) of soil heavy metals far less than 1, while human hair exhibited BCFs of crop-hosted heavy metals exceeding 1, suggesting that human hair can significantly concentrate and amplify heavy metals. These results indicate a V-shaped pattern of heavy metal migration and accumulation in the soil-crop-human system. The enrichment capacity and contamination degree of individual heavy metals decreased in the order of As, Ni, Cu, Cr, Cd, Pb, Zn, and Hg, with Cd and Hg identified as the primary elements posing potential ecological hazards. The exposure levels and risk indices of non-carcinogenic and carcinogenic pathways decreased in the order of ADDimouth (average daily dose via oral intake), ADDidermal (average daily dose via dermal contact), and ADDibreathe (average daily dose via inhalation). This result reveals that oral intake represents the primary pathway of health risks associated with heavy metals in the soil-crop-human system in the study area. Therefore, emphasis should be placed on dietary exposure risks in the health risk management of heavy metals. The health risk indices of various heavy metals decreased in the order of As, Cr, Pb, Ni, Cu, Zn, Cd, and Hg. Additionally, children exhibited higher average daily exposure and non-carcinogenic risk indices than adults. While posing insignificant non-carcinogenic risks to adults, heavy metals carried a certain level of non-carcinogenic risks to children presumably due to their physiological characteristics, exposure duration, and dietary intake. This issue warrants attention from local agencies. The results of this study provide a scientific basis for local government departments to accurately assess and warn of human health risks and to develop scientifically robust standards of food safety and environmental protection.
To investigate the spatial patterns of soil organic matter (SOM) at the county scale in karst transition zones, this study focused on Xingwen County, Sichuan Province. Based on 3,497 surface soil samples, the study analyzed the characteristics of SOM, total nitrogen (TN), total phosphorus (TP), and pH. It revealed differences in SOM across different stratigraphic units and elevation ranges and estimated the density and reserves of surface soil organic carbon (SOC). The results indicate that the mean SOM content in the study area’s surface soil was 22.70 × 10−3; spatial variation was significant; the soil was slightly acidic (mean pH 5.71); TN was relatively abundant, while TP was relatively low. Geological background was the dominant factor controlling the spatial variation of SOM, with elevation serving as a secondary influencing factor. The Permian stratigraphic unit exhibited the highest mean SOM content (29.77 × 10−3), with the soil SOM content in the coal-bearing clastic rock area of the Yuanjiadong–Xingwen Formation reaching as high as 36.39 × 10−3. while the Jurassic strata had the lowest (16.80 ×10−3). Furthermore, SOM content in high-altitude areas (>1,000 m) was approximately 35% higher than in low-altitude areas (<400 m); Soil fertility exhibits a pattern characterized by “sufficient nitrogen, phosphorus deficiency, and relatively abundant organic matter”; the average surface soil carbon (SOC) density is 3,423 t/km2, with a total stock of approximately 3.88 × 106 t, and the soil carbon density in the Permian stratigraphic unit is about 1.77 times that of the Jurassic. These findings provide geochemical evidence to support geologically based zoning for farmland fertility improvement in karst transition zones, differentiated carbon sink management (strict protection of high-carbon-density Permian soil areas and carbon enrichment and fertility improvement in low-carbon-density Jurassic soil areas), and precise regulation of phosphorus nutrients.
This study aims to gain insights into soil pH, the degree of abundance of beneficial nutritional elements in soils, and the characteristics of element migration and accumulation within the rhizosphere soil-tea leaf system in the Yangxi-Tongle area of Sanjiang Dong Autonomous County, Guangxi Province. This study conducted a statistical analysis of 881 sets of geochemical data from topsoil in agricultural land and 14 sets of data from the tea leaf - rhizosphere soil system across 315 km2 in the study area. The analytical results indicate that topsoil in the study area is acidic to strongly acidic, while the rhizosphere soil of tea trees is strongly acidic. The soils exhibit strong heterogeneity of Mn, Se, and Mo, with soil elements demonstrating distinct N-Corg-S and Cu-Mo-Se associations. The results also show that soils in the study possess fairly abundant to abundant total N, total K, organic matter, S, B, and Mo; fairly deficient to deficient total phosphorus, Ca, Mg, Fe, Mn, Cu, Zn, and F; and abundant Se. Tea leaves exhibit relatively strong capacity for bioaccumulation of Zn, Cu, Cd, B, Ni, and F in soils, but relatively weak capacity for bioaccumulation of As, Pb, Cr, and Ge. This study concludes that tea leaves in the study area contain moderate Se content; low contents of Cd, As, and Hg; and a Pb content within regulatory limits, suggesting generally safe tea quality. The results of this study further provide a geochemical basis for the healthy development of the local tea industry.
Focusing on the typical loess surface structure in the Xiaoyi area, Shanxi Province, China, this study elaborates on the geometry selection, data processing, and data interpretation of the microlog survey method with sources in the borehole and receivers at the surface, and achieve several findings. The microlog survey via in-borehole seismic wave excitation exhibits encouraging source-media coupling effects, clear first-break onset, and seismic records with high signal-to-noise ratios (SNRs). Given the presence of source-receiver offset in microlog survey data, the inclined ray path from the shot point to that the receiver point should be corrected to a vertical path. Based on the correction equation, the source-receiver offset should be less than 10 m in practical applications. The loess structure in the study area shows significant vertical stratification. At the cliff, the seismic velocity on the side near the collapse section is significantly lower than that on the side far away from the section, with vertical fractures distributed within the loess layers. Literally, the P-wave velocity varies with the observation azimuth due to heterogeneous local compaction, presenting a quasi-elliptical distribution pattern overall. Therefore, the circular-array geometry can enable the microlog survey to investigate the velocities and thicknesses of low-velocity zones in loess and to characterize the velocity heterogeneity across various loess layers.