Latest ArticlesMid-to-deep shale gas reservoirs exhibit a composite fracture–matrix structure, in which internal weak planes play an essential role in stress evolution and fracture propagation. Few studies have treated natural fractures as both hydraulic and mechanical weak planes simultaneously, nor has there been systematic and quantitative analysis of the impact of these fractures on four-dimensional stress evolution and fracture propagation in infill-wells during production.
To address these knowledge gaps, this study conducts laboratory tests to obtain the normal stiffness and hydraulic properties of weak planes, and develops a four-dimensional stress evolution model for mid-to-deep shale gas reservoirs that captures the coupled hydraulic–mechanical weakening behavior of natural fractures. The model is then used to analyze how weak planes perturb the in-situ stress field and the morphology of hydraulic fractures in infill-wells at different stages of production.
Low-stiffness weak planes are prone to deformation, with reduced internal stress and stress concentration at fracture tips. Moreover, the disturbance of the maximum horizontal principal stress increases progressively with the growing angle between the weak plane and the principal stress direction, while the minimum horizontal principal stress exhibits a non-monotonic response: first decreasing, then increasing. During production, the deviation of stress orientation is more pronounced when mechanical weak planes are considered. Correspondingly, infill well fractures extend farther along the original maximum horizontal stress direction when not in contact with fracture zones, while the lateral expansion is enhanced and the propagation along the original maximum horizontal stress is shortened. These differences remain relatively unchanged over time, reflecting the fact that weak planes primarily influence stress disturbance in the early stages, becoming stable later on.
This study reveals how weak planes disturb the four-dimensional stress evolution. It provides theoretical guidance and practical reference for stress management and fracture optimization in hydraulic fracturing and infill development of mid-to-deep shale gas reservoirs.
Deep shale reservoirs are characterized by high temperature, high pressure, and well-developed bedding structures, which jointly govern the mechanical response of rocks during hydraulic fracturing. Previous studies have primarily focused on the effects of single temperature conditions or the mechanical behavior of bedding under conventional environments. However, systematic understanding of the elastoplastic deformation behavior and anisotropic failure mechanisms of bedded shale under coupled high-temperature and high-confining-pressure conditions remains insufficient, particularly in terms of the quantitative characterization of strength parameter evolution, damage features, and fracture complexity.
Therefore, this study employs a high-temperature and high-pressure triaxial rock mechanics testing system to conduct triaxial compression experiments on shale specimens with different bedding orientations. In combination with CT scanning, ultrasonic testing, scanning electron microscopy (SEM), X-ray diffraction (XRD), and nuclear magnetic resonance (NMR) techniques, the internal structural evolution, fracture development, and pore structure variations of the rocks are comprehensively characterized. Meanwhile, the evolution laws of strength parameters are analyzed based on the Mohr–Coulomb, Hoek–Brown, and Drucker–Prager criteria, and the fracture complexity and thermal damage characteristics are quantitatively evaluated using fractal dimension, energy dissipation theory, and damage factor calculations.
The results indicate that increasing temperature promotes the expansion of bedding structures and induces thermally damaged microcracks. Fracture complexity increases with temperature, accompanied by a pronounced attenuation of wave velocity, while the peak strength and elastic modulus of shale exhibit decreasing trends, demonstrating that thermal stress significantly degrades its mechanical properties. Comprehensive analysis based on the three yield criteria shows that, under high-temperature and high-confining-pressure conditions, shale cohesion gradually decreases whereas the internal friction angle increases, and the failure mode transitions from brittle-dominated behavior to elastoplastic deformation. The coupled effects of temperature and pressure enhance the accumulation of plastic strain prior to failure. Energy analysis and damage factor results further reveal that elevated temperature markedly increases the proportion of dissipated energy and intensifies rock damage, reflecting enhanced microcrack propagation and irreversible deformation processes. Fractal dimension analysis demonstrates that the fracture network becomes progressively more complex with increasing temperature, facilitating the formation and connectivity of multiscale fracture systems. Anisotropy index analysis shows that thermal stress amplifies the anisotropic differences in compressive strength and elastic modulus among shales with different bedding orientations, whereas confining pressure suppresses such directional disparities to some extent by restricting crack opening and bedding-controlled deformation. Together, these factors determine the overall anisotropic mechanical response of deep shale.
In summary, the combined effects of high temperature and high pressure intensify the elastoplastic deformation and damage evolution of bedded shale. Under such conditions, the failure mode shifts from brittle behavior to plastic-dominated deformation, accompanied by enhanced energy dissipation and damage development. This process promotes the increasing complexity of fracture networks and alters the anisotropic failure patterns governed by bedding structures. [Significance] This study systematically elucidates the mechanisms of elastoplastic deformation and anisotropic failure of bedded shale under high-temperature and high-pressure conditions, providing essential mechanical insights for the stability evaluation of deep shale reservoirs and the optimization of hydraulic fracturing parameters. The findings hold significant scientific relevance and engineering value for the efficient development of deep unconventional oil and gas resources.
The accurate characterization of formation fracture complexity is of great significance for evaluating lost circulation risks, hydraulic fracturing stimulation effectiveness, and various operational stages throughout the oil and gas drilling and production lifecycle. Addressing the limitation of the inability of existing fracture characteristic parameters to comprehensively represent fracture complexity, this study proposes a method for establishing a 3D fracture complexity index based on the concept of Well-Seismic Integration. Using an oilfield in the Bohai Sea, China, for a case study, this method refines the characterization of formation fracture complexity.
Considering the influence of both fracture aperture and fracture intensity on fracture complexity, we establish a 1D fracture complexity index model. This model is based on expert decision-making and well-logging data; it uses a combined subjective and objective weighting approach that integrates the Analytic Hierarchy Process and the Entropy Weight Method. Furthermore, the fracture development degree attribute volume derived from seismic inversion is used as a constraint condition for Kriging interpolation to construct the 3D fracture complexity index attribute volume.
This method is used to derive the 1D fracture complexity index profiles of drilled wells. Comparing these profiles with borehole image logs shows that a higher fracture complexity index corresponds to a greater number of fractures or larger fracture apertures at the corresponding depth, confirming the feasibility of this method for characterizing fracture complexity. In the 3D fracture complexity index model, the attribute volume profile is extracted along the drilled well and compared with formation lithology and dual laterolog profiles. The results indicate that a higher fracture complexity index corresponds to a greater difference in dual laterolog responses. Furthermore, the lithology of this well interval is identified as granitic basement gneiss, further validating the reliability of this method.
A fracture complexity index was constructed using a combined weighting approach that integrates the subjective Analytic Hierarchy Process and the objective Entropy Weight Method. This index not only reflects the extent of fracture distribution but also captures the internal structural heterogeneity of fractures. It addresses the issue of low prediction accuracy in existing lost circulation risk prediction methods, which rely solely on fracture intensity as the fracture-characterizing parameter. Moreover, it compensates for the limitations of current methods for evaluating hydraulic fracturing stimulation, which assess compressibility based on a single factor, such as fracture intensity or fracture aperture. [Significance] The research provides a theoretical foundation and engineering guidance for predicting lost circulation risk and assessing compressibility.
The geometry of multi-stage hydraulic fractures in shale gas horizontal wells is influenced by the three-dimensional in-situ stress distribution. The single-well stress profile serves as a crucial basis for predicting fracture height, and both the effective stress coefficient (Biot's coefficient) and the vertical grid resolution significantly impact the interpreted stress profile, consequently affecting the accuracy of fracture height prediction.
This study employs different Biot's coefficients (constant values and functions varying with logs) and vertical grid resolutions to compute stress profiles. It simulates and analyzes the differences in planar 3D fracture geometries under various stress profiles, systematically investigating the influence of Biot's coefficient on the stress profile and fracture geometry, and subsequently optimizing the vertical grid resolution and the method for interpreting Biot's coefficient.
The results indicate that as Biot's coefficient decreases, the variation amplitude of the vertical in-situ stress profile increases, thereby restricting the vertical propagation capability of hydraulic fractures. Increasing the vertical grid resolution in the fracturing model helps to reduce the influence range of stress extremes; a 1 m vertical grid resolution achieves a favorable balance between simulation efficiency and accuracy. The Biot's coefficients calculated using empirical formulas and the poroelastic model yield similar results, with errors relative to laboratory measurements ranging from 3.68% to 3.93%. These methods provide a better match to stress test results from different formations. Furthermore, the simulated fracture heights using these variable coefficients align more closely with actual downhole fracture height monitoring results compared to using a constant Biot's value, showing errors of 8.64% to 9.94% compared to microseismic monitoring results from a vertical-to-horizontal well at the same site.
Through the analysis of initial in-situ stress fitting accuracy and the subsequent correspondence between simulated fracture height and monitoring data, it can be concluded that selecting an appropriate Biot's coefficient enables more realistic predictions of in-situ stress distribution and fracture propagation geometry.[Significance] This study provides valuable insights for future stress distribution calculations and fracture height predictions in shale gas wells through an in-depth discussion on the effects of Biot's coefficient and vertical grid resolution.
The efficient development of shale oil in the Yingxiongling area of the Qaidam Basin relies on horizontal well volumetric fracturing. Accurately evaluating cluster efficiency during stimulation and post-fracturing production performance remains a key challenge. This study aims to investigate the application and effectiveness of behind-casing fiber-optic sensing technology for this purpose.
Based on the principles of distributed fiber-optic sensing, this technology was deployed behind the casing to monitor fracturing operations and subsequent production in shale oil horizontal wells. The analysis focused on interpreting the monitoring data to assess fracture initiation and cluster contribution.
The behind-casing fiber-optic monitoring provided clear diagnostic results. Compared to the conventional uniform perforation method, employing a tapered perforation design increased the cluster initiation rate during fracturing from 62% to 88%, representing a 26% improvement. Furthermore, the post-fracturing production efficiency per stage was enhanced from 0.94 m3 per stage to 3.20 m3 per stage, a 2.4-fold increase. An additional operational finding was that controlling the fracturing operation to within 8 hours after setting the metallic dissolvable bridge plug reduced fluid loss during the treatment by 7.43%.
The tapered perforation strategy significantly improves both cluster initiation and production contribution in the studied shale oil formation. Furthermore, optimizing the timing of fracturing operations after bridge plug setting can effectively mitigate fluid loss. [Significance] This study demonstrates the practical value of behind-casing fiber-optic monitoring for guiding key engineering decisions. The findings provide precise guidance for optimizing perforation design and operational timing in volumetric fracturing of shale oil horizontal wells in the Qaidam Basin, contributing to enhanced stimulation effectiveness and development efficiency.
Deep shale reservoirs are characterized by high temperature, high pressure, elevated in situ stress, and strong plasticity. Conventional in-situ stress testing methods and log interpretation models, often calibrated under simplified laboratory conditions, suffer from limited predictive accuracy, high operational cost, and poor generalizability—challenges that constrain their utility in guiding shale gas exploration and development.
Focusing on a structurally complex shale gas block in southern Sichuan as a representative case, we integrated dynamic and static multi-source data across drilling, logging, testing, and production stages. Along with experimental measurements of the physical and mechanical properties of rock under different conditions, we developed a hybrid stress prediction model by combining machine learning techniques with geomechanical principles. This multi-method, log-based intelligent prediction framework enables the generation of high-resolution in-situ stress profiles for efficient shale gas development.
In the first member of the Longmaxi Formation (Long-1 Member), organic content, confining pressure, and lamination structures significantly influence mechanical anisotropy, particularly in Beds 1–4, which exhibit stronger anisotropy than the upper beds. Based on these findings, we developed a mechanically calibrated anisotropic stress interpretation model for deep shales. Using laboratory- and field-calibrated synthetic stress datasets, we established a standardized stress database for the southern Sichuan shale reservoir. Key sensitive logging parameters, including shear wave slowness, resistivity, acoustic logs, and Young's modulus were identified via Pearson correlation analysis. An optimized XGBoost model achieved interpretation accuracies above 90% for all three principal stress components, with an RMSE of 6.63, an MAE of 3.89, and a coefficient of determination (R2) of 0.91, indicating strong robustness and generalizability. The results revealed four distinct stress barrier layers from the Wufeng Formation to the Longmaxi Formation, and the top of Bed 1 and Bed 6 acted as dominant stress-sealing interfaces. Localized compressive stresses induced by fold-related deformation further enhanced vertical stress compartmentalization and increased the minimum horizontal principal stress, thereby exerting significant influence on hydraulic fracturing performance.
The study revealed the geological factors controlling the mechanical anisotropy of the shale in the Long-1 Member, and established an isotropic in-situ stress interpretation model suitable for deep shale reservoirs accordingly. An integrated intelligent model, L-XGBoost, was adopted to achieve a prediction accuracy exceeding 90% for three-dimensional in-situ stresses. The research also clarified the development characteristics of four sets of stress barrier layers within the Long-1 Member shale and their impact on fracturing effectiveness.
These insights provide a scientific basis for fine-scale stratigraphic subdivision and three-dimensional well pattern design for shale gas development in the tectonically complex southeastern Sichuan Basin.
Lithofacies identification constitutes a core component of reservoir characterization and is of great significance for oil and gas exploration and development. Traditional lithofacies identification relies primarily on expert experience and manual interpretation, suffering from high subjectivity, low efficiency, and poor consistency. Moreover, identifying carbonate lithofacies such as bioreefs and bioclastic shoals solely through geological and geophysical data combined with limited core samples and thin-section analysis is labor-intensive and cannot meet the requirements of refined oil and gas field development. This study aims to address the major challenges in intelligent lithofacies identification, namely the insufficient modeling of spatial dependencies in the depth direction, the lack of technical prior knowledge, and the inadequate integration of geological understanding with data-driven approaches.
We propose an intelligent well-logging lithofacies identification method for deep carbonate rocks that integrates sequence stratigraphic prior information. The method applies a deep neural network, termed Sequence-Constrained Long Short-Term Memory Network (SC-LSTM), as its core framework. This network embeds sequence stratigraphic units as geological constraints into the input feature space of the model, achieving an organic integration of geological understanding with logging response characteristics. The network architecture comprises two parallel feature extraction modules: a curve feature extraction module that utilizes convolutional layers to extract local patterns and depth-directional variation characteristics from logging responses, and a sequence feature extraction module that performs convolutional encoding on sequence division schemes to convert discrete sequence and system tract information into continuous feature representations. The method uses conventional well logs, including natural gamma ray, acoustic transit time, density, neutron, and resistivity as input data. A sliding time-window sampling strategy expands the training dataset to address the problem of limited labeled samples, while a weighted averaging prediction method enhances the stability and reliability of the identification results.
The application to the Changxing Formation carbonate reservoir in the Yuanba gas field demonstrates that an optimal sample length of 40 meters can (i) completely cover the vertical evolution sequence from reef base to reef core to reef cap, or (ii) encompass a complete reef-shoal depositional combination controlled by sea-level cycles. This, enables the model to fully learn the orderly stacking patterns and facies transition characteristics within sequence units. The model achieved 92% identification accuracy on the test set. Comparative experiments between conventional LSTM and SC-LSTM networks reveal that the proposed method effectively avoids geologically unreasonable predictions that may arise from relying solely on logging response characteristics. For example, it avoids erroneously predicting reef cap facies during the early highstand system tract or misidentifying reef cap facies as reef/shoal interfacies at reef tops.
These findings confirm that the integration of sequence stratigraphic prior information can effectively constrain model predictions and avoid geologically unreasonable results. The conventional LSTM model learns lithofacies characteristics only from numerical patterns of logging curves and easily confuses lithofacies types with similar logging responses under different sequence backgrounds. In contrast, the SC-LSTM model enables the network to understand the geological rules and the combined characteristics of lithofacies development within different sequence units and system tracts by fusing sequence stratigraphic information. This improves the geological rationality and prediction accuracy of lithofacies identification. [Significance] The significance of this study lies not only in its practical applications—enabling rapid establishment of regional lithofacies distribution patterns to guide well deployment and providing timely support for reservoir fine characterization and the exploitation of remaining oil and gas potential through the real-time updating of lithofacies interpretation schemes as new well data accumulate—but also in its theoretical contributions. It particularly advances the integration of domain knowledge with artificial intelligence technology by linking sequence stratigraphy theory, depositional environment evolution, and deep learning algorithms in a unified framework for intelligent lithofacies identification. This opens new avenues for automated and intelligent reservoir characterization in complex carbonate formations.
During CO2 fluid injection into oil reservoirs or saline aquifers, CO2-water-rock interactions can alter porous media properties, thereby influencing the CO2 microscale sweep efficiency, primarily due to capillary effects. Laboratory experiments and micro/nanoscale numerical simulations often struggle to isolate the specific contributions of individual pore properties, limiting targeted injection optimization for maximizing geological storage potential.
To investigate the dynamic evolution of pore structures and properties during multi-mineral competitive dissolution-precipitation reactions under CO2 injection, we developed a lattice Boltzmann method (LBM). This method made it possible to simulate CO2-water-rock interactions in shale oil reservoirs and to analyze pore properties (e.g., average wettability, roughness, porosity) and CO2 microscale sweep efficiency. The LBM simulations generated a dataset covering various pore property scenarios to support causal machine learning. Using a double machine learning framework with a random forest algorithm, a causal inference prediction model was built for CO2 microscale sweep efficiency, treating reaction time as a continuous treatment variable.
This model quantified the relative importance of key pore parameters—porosity, wettability, and mean pore diameter—on sweep efficiency within the pore network. Its results indicate that reservoirs with higher proportions of carbonate minerals (calcite) exhibit greater CO2 microscale sweep efficiency. The CO2-water-rock reaction triggers calcite dissolution, forming preferential flow paths, while the secondary precipitation of oil-wet calcite induces localized wettability alteration. This dynamic "dissolution–secondary precipitation" process modifies capillary forces by altering the structure and physical properties of pore-throats, thereby influencing the microscale sweep range of CO2 fluids. However, under identical mineral proportions, CO2 sweep efficiency varies among samples, with higher calcite proportions correlating with broader variation in sweep performance.
These findings underscore the crucial role of physical pore properties, beyond mineral composition alone, in governing sweep efficiency. Causal learning identified key pore-throat parameters that control CO2 microscale sweep behavior, with wettability emerging as the most influential factor. Neutrally water-wet pore-throats exhibited the highest CO2 sweep efficiency. [Significance] By constructing a Lattice Boltzmann model for CO2-water-rock interactions and quantifying the impact of key physical parameters, this study provides a reference and guidance for the targeted adjustment of CO2 injection strategies and the enhancement of the geological CO2 storage effectiveness.
During the 1950s, the prevalent presumption that China was oil-poor constrained its exploration efforts and hindered its oil exploitation.
Based on historical materials such as letters, manuscripts, speeches, and works by J.S.Lee during his tenure as Minister of Geology from 1954 to 1971, this paper comprehensively outlines the complete practical course of his guidance for China's offshore oil exploration.
Based on his analysis of the Neocathaysian structural system, J.S.Lee proposed a strategy of "balanced development between eastern and western regions, with simultaneous advances on land and at sea." He also used the principle of "Find the oil region first, then locate the oil field," thereby putting into practice a comprehensive system for petroleum survey and exploration.
Following the breakthrough at the Daqing Oil Field, J.S.Lee personally oversaw the formulation of a progressive "from land to sea" strategy. Starting with the Bohai Sea, he systematically planned the layout for oil and gas exploration across China's entire maritime territory and issued the strategic call to "march toward the ocean." [Significance] This paper provides an important historical reference for understanding the logical implications of national strategies such as achieving self-reliance and self-improvement in science and technology and ensuring energy and resource security.
With the implementation of the national strategy of seeking resources, safety, and space from deep Earth, the frequency and intensity of various engineering disasters caused by in-situ stress have also significantly increased. At the same time, in engineering fields such as underground gas storage and water diversion tunnels, using the minimum principal stress criterion to determine the upper limit operating pressure can to some extent improve the storage capacity of underground space or reduce tunnel support costs. Overall, the importance of in-situ stress in the process of advancing towards the deep Earth is becoming increasingly prominent. However, there are still bottlenecks in the demand oriented deep stress measurement technology, such as insufficient detection capability and low reliability of measurement results, which restrict the application of in-situ stress data in solving scientific problems such as tectonic activity, deep resource development, and space utilization.
On the basis of a brief review of the current development status of in-situ stress measurement technology, this article focuses on the progress and achievements of the team in theoretical research, technical development, and application practice of in-situ stress measurement in recent years.
It points out the challenges faced by deep in-situ stress measurement in terms of theoretical methods and technical aspects, and proposes a research route and direction for deep borehole stress detection in conjunction with the current national science and technology major project "Key Technologies and Experiments for Deep Stress Detection".
The goal is to develop high, precise, and advanced in-situ stress measurement technology and equipment, construct an in-situ stress observation technology system covering the depth space of the hypocenter source. [Significance] Deep borehole in-situ stress detection technology holds significant potential for applications in geodynamics research, deep resource exploration, and disaster prediction and prevention.