收藏切换
Intelligent prediction method and application of single-well in-situ stress in shale reservoirs driven by multi-source data
收藏切换
Baojian SHEN1, Dan LI2, Jianhua HE2, *, Bilan XU2, Yanfeng WU2, Ruyue WANG3, Rui JIANG2, Ruixue LI2, Zhizhou HUO1, Kun LIU1
Journal of Geomechanics | 2026, 32(1) : 227 - 244
Less
收藏切换
Journal of Geomechanics | 2026, 32(1): 227-244
Intelligent prediction method and application of single-well in-situ stress in shale reservoirs driven by multi-source data
Full
Baojian SHEN1, Dan LI2, Jianhua HE2, *, Bilan XU2, Yanfeng WU2, Ruyue WANG3, Rui JIANG2, Ruixue LI2, Zhizhou HUO1, Kun LIU1
Affiliations
  • 1Sinopec Petroleum Exploration and Production Research Institute, Beijing 102206, China
  • 2College of Energy (College of Modern Shale Gas Industry), Chengdu University of Technology, Chengdu 610059, Sichuan, China
  • 3State Key Laboratory of Shale Oil and Gas Enrichment Mechanisms and Efficient Development, Beijing 102206, China
Published: 2026-02-28 doi: 10.12090/j.issn.1006-6616.2025126
Outline
收藏切换
Objective

Deep shale reservoirs are characterized by high temperature, high pressure, elevated in situ stress, and strong plasticity. Conventional in-situ stress testing methods and log interpretation models, often calibrated under simplified laboratory conditions, suffer from limited predictive accuracy, high operational cost, and poor generalizability—challenges that constrain their utility in guiding shale gas exploration and development.

Methods

Focusing on a structurally complex shale gas block in southern Sichuan as a representative case, we integrated dynamic and static multi-source data across drilling, logging, testing, and production stages. Along with experimental measurements of the physical and mechanical properties of rock under different conditions, we developed a hybrid stress prediction model by combining machine learning techniques with geomechanical principles. This multi-method, log-based intelligent prediction framework enables the generation of high-resolution in-situ stress profiles for efficient shale gas development.

Results

In the first member of the Longmaxi Formation (Long-1 Member), organic content, confining pressure, and lamination structures significantly influence mechanical anisotropy, particularly in Beds 1–4, which exhibit stronger anisotropy than the upper beds. Based on these findings, we developed a mechanically calibrated anisotropic stress interpretation model for deep shales. Using laboratory- and field-calibrated synthetic stress datasets, we established a standardized stress database for the southern Sichuan shale reservoir. Key sensitive logging parameters, including shear wave slowness, resistivity, acoustic logs, and Young's modulus were identified via Pearson correlation analysis. An optimized XGBoost model achieved interpretation accuracies above 90% for all three principal stress components, with an RMSE of 6.63, an MAE of 3.89, and a coefficient of determination (R2) of 0.91, indicating strong robustness and generalizability. The results revealed four distinct stress barrier layers from the Wufeng Formation to the Longmaxi Formation, and the top of Bed 1 and Bed 6 acted as dominant stress-sealing interfaces. Localized compressive stresses induced by fold-related deformation further enhanced vertical stress compartmentalization and increased the minimum horizontal principal stress, thereby exerting significant influence on hydraulic fracturing performance.

Conclusions

The study revealed the geological factors controlling the mechanical anisotropy of the shale in the Long-1 Member, and established an isotropic in-situ stress interpretation model suitable for deep shale reservoirs accordingly. An integrated intelligent model, L-XGBoost, was adopted to achieve a prediction accuracy exceeding 90% for three-dimensional in-situ stresses. The research also clarified the development characteristics of four sets of stress barrier layers within the Long-1 Member shale and their impact on fracturing effectiveness.

Significance

These insights provide a scientific basis for fine-scale stratigraphic subdivision and three-dimensional well pattern design for shale gas development in the tectonically complex southeastern Sichuan Basin.

deep shale  /  southeast Sichuan  /  Wufeng–Longmaxi Formations  /  in-situ stress  /  intelligent logging prediction  /  stress compartment
申宝剑, 李丹, 何建华, 徐碧兰, 吴炎峰, 王濡岳, 蒋睿, 李瑞雪, 霍志周, 刘坤. 多源数据驱动的页岩储层单井地应力智能预测方法及应用. 地质力学学报, 2026 , 32 (1) : 227 -244 . DOI: 10.12090/j.issn.1006-6616.2025126
Baojian SHEN, Dan LI, Jianhua HE, Bilan XU, Yanfeng WU, Ruyue WANG, Rui JIANG, Ruixue LI, Zhizhou HUO, Kun LIU. Intelligent prediction method and application of single-well in-situ stress in shale reservoirs driven by multi-source data[J]. Journal of Geomechanics, 2026 , 32 (1) : 227 -244 . DOI: 10.12090/j.issn.1006-6616.2025126
  • This research was financially supported by the National Science and Technology Major Project of China (Grant No. 2025ZD1404102-04),the National Natural Science Foundation of China (Grant No. 42402148), the Development Fund of the National Key Laboratory of Shale Oil & Gas Enrichment Mechanisms and Efficient Development (Grant No. 33550000-24-ZC0699-0057), and Science and Technology Department Project of China Petroleum & Chemical Corporation (Grant No. P24181).
Year 2026 volume 32 Issue 1
75
33
Cite this Article
BibTeX
Article Info
doi: 10.12090/j.issn.1006-6616.2025126
  • Receive Date:2025-09-02
  • Online Date:2026-11-13
  • Published:2026-02-28
Article Data
Affiliations
History
  • Received:2025-09-02
  • Revised:2026-01-05
  • Accepted:2026-01-07
Funding
This research was financially supported by the National Science and Technology Major Project of China (Grant No. 2025ZD1404102-04),the National Natural Science Foundation of China (Grant No. 42402148), the Development Fund of the National Key Laboratory of Shale Oil & Gas Enrichment Mechanisms and Efficient Development (Grant No. 33550000-24-ZC0699-0057), and Science and Technology Department Project of China Petroleum & Chemical Corporation (Grant No. P24181).
Affiliations
    1Sinopec Petroleum Exploration and Production Research Institute, Beijing 102206, China
    2College of Energy (College of Modern Shale Gas Industry), Chengdu University of Technology, Chengdu 610059, Sichuan, China
    3State Key Laboratory of Shale Oil and Gas Enrichment Mechanisms and Efficient Development, Beijing 102206, China
References
Share
https://castjournals.cast.org.cn/joweb/dzlxxb/EN/10.12090/j.issn.1006-6616.2025126
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT