Deep shale reservoirs are characterized by high temperature, high pressure, elevated in situ stress, and strong plasticity. Conventional in-situ stress testing methods and log interpretation models, often calibrated under simplified laboratory conditions, suffer from limited predictive accuracy, high operational cost, and poor generalizability—challenges that constrain their utility in guiding shale gas exploration and development.
Focusing on a structurally complex shale gas block in southern Sichuan as a representative case, we integrated dynamic and static multi-source data across drilling, logging, testing, and production stages. Along with experimental measurements of the physical and mechanical properties of rock under different conditions, we developed a hybrid stress prediction model by combining machine learning techniques with geomechanical principles. This multi-method, log-based intelligent prediction framework enables the generation of high-resolution in-situ stress profiles for efficient shale gas development.
In the first member of the Longmaxi Formation (Long-1 Member), organic content, confining pressure, and lamination structures significantly influence mechanical anisotropy, particularly in Beds 1–4, which exhibit stronger anisotropy than the upper beds. Based on these findings, we developed a mechanically calibrated anisotropic stress interpretation model for deep shales. Using laboratory- and field-calibrated synthetic stress datasets, we established a standardized stress database for the southern Sichuan shale reservoir. Key sensitive logging parameters, including shear wave slowness, resistivity, acoustic logs, and Young's modulus were identified via Pearson correlation analysis. An optimized XGBoost model achieved interpretation accuracies above 90% for all three principal stress components, with an RMSE of 6.63, an MAE of 3.89, and a coefficient of determination (R2) of 0.91, indicating strong robustness and generalizability. The results revealed four distinct stress barrier layers from the Wufeng Formation to the Longmaxi Formation, and the top of Bed 1 and Bed 6 acted as dominant stress-sealing interfaces. Localized compressive stresses induced by fold-related deformation further enhanced vertical stress compartmentalization and increased the minimum horizontal principal stress, thereby exerting significant influence on hydraulic fracturing performance.
The study revealed the geological factors controlling the mechanical anisotropy of the shale in the Long-1 Member, and established an isotropic in-situ stress interpretation model suitable for deep shale reservoirs accordingly. An integrated intelligent model, L-XGBoost, was adopted to achieve a prediction accuracy exceeding 90% for three-dimensional in-situ stresses. The research also clarified the development characteristics of four sets of stress barrier layers within the Long-1 Member shale and their impact on fracturing effectiveness.
These insights provide a scientific basis for fine-scale stratigraphic subdivision and three-dimensional well pattern design for shale gas development in the tectonically complex southeastern Sichuan Basin.
| 科 Family | 属数 Number of genus | 种数 Number of species | 占总种数比例 Percentage of total species (%) | 属 Genus | 种数 Number of species | 占总种数比例 Percentage of total species (%) |
|---|---|---|---|---|---|---|
| 鹅膏菌科Amanitaceae | 2 | 11 | 5.26 | 鹅膏菌属 Amanita | 10 | 4.78 |
| 小菇科 Mycenaceae | 2 | 12 | 5.74 | 丝盖伞属 Inocybe | 5 | 2.39 |
| 多孔菌科 Polyporaceae | 8 | 14 | 6.70 | 蜡蘑属 Laccaria | 5 | 2.39 |
| 红菇科 Russulaceae | 3 | 23 | 11.00 | 小皮伞属 Marasmius | 6 | 2.87 |
| 小菇属 Mycena | 11 | 5.26 | ||||
| 光柄菇属 Pluteus | 5 | 2.39 | ||||
| 红菇属 Russula | 17 | 8.13 | ||||
| 栓菌属 Trametes | 5 | 2.39 |