收藏切换
Refined characterization of the 3D fracture complexity index based on Well-Seismic Integration
收藏切换
Jinfa ZHANG1, 2, 3, Yongcun FENG2, 3, 4, *, Bing HE5, Sijia MA1, 2, 3, Jingyi WEI1, 2, 3, Jin'gen DENG1, 2, 3
Journal of Geomechanics | 2026, 32(1) : 184 - 196
Less
收藏切换
Journal of Geomechanics | 2026, 32(1): 184-196
Refined characterization of the 3D fracture complexity index based on Well-Seismic Integration
Full
Jinfa ZHANG1, 2, 3, Yongcun FENG2, 3, 4, *, Bing HE5, Sijia MA1, 2, 3, Jingyi WEI1, 2, 3, Jin'gen DENG1, 2, 3
Affiliations
  • 1College of Petroleum Engineering, China University of Petroleum (Beijing), Beijing 102249, China
  • 2State Key Laboratory of Petroleum Resources and Engineering, Beijing 102249, China
  • 3Hainan Institute, China University of Petroleum (Beijing), Sanya 572000, Hainan, China
  • 4College of Safety and Ocean Engineering, China University of Petroleum (Beijing), Beijing 102249, China
  • 5Supervision Center, PetroChina Tarim Oilfield Company, Korla 841000, Xinjiang, China
Published: 2026-02-28 doi: 10.12090/j.issn.1006-6616.2025059
Outline
收藏切换
Objective

The accurate characterization of formation fracture complexity is of great significance for evaluating lost circulation risks, hydraulic fracturing stimulation effectiveness, and various operational stages throughout the oil and gas drilling and production lifecycle. Addressing the limitation of the inability of existing fracture characteristic parameters to comprehensively represent fracture complexity, this study proposes a method for establishing a 3D fracture complexity index based on the concept of Well-Seismic Integration. Using an oilfield in the Bohai Sea, China, for a case study, this method refines the characterization of formation fracture complexity.

Methods

Considering the influence of both fracture aperture and fracture intensity on fracture complexity, we establish a 1D fracture complexity index model. This model is based on expert decision-making and well-logging data; it uses a combined subjective and objective weighting approach that integrates the Analytic Hierarchy Process and the Entropy Weight Method. Furthermore, the fracture development degree attribute volume derived from seismic inversion is used as a constraint condition for Kriging interpolation to construct the 3D fracture complexity index attribute volume.

Results

This method is used to derive the 1D fracture complexity index profiles of drilled wells. Comparing these profiles with borehole image logs shows that a higher fracture complexity index corresponds to a greater number of fractures or larger fracture apertures at the corresponding depth, confirming the feasibility of this method for characterizing fracture complexity. In the 3D fracture complexity index model, the attribute volume profile is extracted along the drilled well and compared with formation lithology and dual laterolog profiles. The results indicate that a higher fracture complexity index corresponds to a greater difference in dual laterolog responses. Furthermore, the lithology of this well interval is identified as granitic basement gneiss, further validating the reliability of this method.

Conclusions

A fracture complexity index was constructed using a combined weighting approach that integrates the subjective Analytic Hierarchy Process and the objective Entropy Weight Method. This index not only reflects the extent of fracture distribution but also captures the internal structural heterogeneity of fractures. It addresses the issue of low prediction accuracy in existing lost circulation risk prediction methods, which rely solely on fracture intensity as the fracture-characterizing parameter. Moreover, it compensates for the limitations of current methods for evaluating hydraulic fracturing stimulation, which assess compressibility based on a single factor, such as fracture intensity or fracture aperture. [Significance] The research provides a theoretical foundation and engineering guidance for predicting lost circulation risk and assessing compressibility.

fracture complexity index  /  fracture aperture  /  fracture intensity  /  Analytic Hierarchy Process  /  Entropy Weight Method  /  Well-Seismic Integration
张金发, 冯永存, 何兵, 马思佳, 魏静怡, 邓金根. 基于井震结合的三维裂缝复杂指数精细化表征. 地质力学学报, 2026 , 32 (1) : 184 -196 . DOI: 10.12090/j.issn.1006-6616.2025059
Jinfa ZHANG, Yongcun FENG, Bing HE, Sijia MA, Jingyi WEI, Jin'gen DENG. Refined characterization of the 3D fracture complexity index based on Well-Seismic Integration[J]. Journal of Geomechanics, 2026 , 32 (1) : 184 -196 . DOI: 10.12090/j.issn.1006-6616.2025059
  • This research was financially supported by the National Natural Science Foundation of China (Grant No. 52074312), the CNPC Science and Technology Innovation Foundation (Grant No. 2021DQ02-0505), the Open Fund Project of the National Key Laboratory for the Enrichment Mechanism and Efficient Development of Shale Oil and Gas (Grant No. 36650000-24-ZC0609-0006), and the Major Science and Technology Project of Karamay City (Grant No. 20232023zdzx0003).
Year 2026 volume 32 Issue 1
71
33
Cite this Article
BibTeX
Article Info
doi: 10.12090/j.issn.1006-6616.2025059
  • Receive Date:2025-06-03
  • Online Date:2026-11-13
  • Published:2026-02-28
Article Data
Affiliations
History
  • Received:2025-06-03
  • Revised:2026-01-11
  • Accepted:2026-01-11
Funding
This research was financially supported by the National Natural Science Foundation of China (Grant No. 52074312), the CNPC Science and Technology Innovation Foundation (Grant No. 2021DQ02-0505), the Open Fund Project of the National Key Laboratory for the Enrichment Mechanism and Efficient Development of Shale Oil and Gas (Grant No. 36650000-24-ZC0609-0006), and the Major Science and Technology Project of Karamay City (Grant No. 20232023zdzx0003).
Affiliations
    1College of Petroleum Engineering, China University of Petroleum (Beijing), Beijing 102249, China
    2State Key Laboratory of Petroleum Resources and Engineering, Beijing 102249, China
    3Hainan Institute, China University of Petroleum (Beijing), Sanya 572000, Hainan, China
    4College of Safety and Ocean Engineering, China University of Petroleum (Beijing), Beijing 102249, China
    5Supervision Center, PetroChina Tarim Oilfield Company, Korla 841000, Xinjiang, China
References
Share
https://castjournals.cast.org.cn/joweb/dzlxxb/EN/10.12090/j.issn.1006-6616.2025059
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT