收藏切换
Study on the influence of in-situ stress changes on shale fracture propagation considering the effect of effective stress coefficients
收藏切换
Chenxi ZHANG1, Huiying TANG1, *, Yuxin TANG1, Yue CHEN2, Wenbin DENG1
Journal of Geomechanics | 2026, 32(1) : 197 - 212
Less
收藏切换
Journal of Geomechanics | 2026, 32(1): 197-212
Study on the influence of in-situ stress changes on shale fracture propagation considering the effect of effective stress coefficients
Full
Chenxi ZHANG1, Huiying TANG1, *, Yuxin TANG1, Yue CHEN2, Wenbin DENG1
Affiliations
  • 1State Key Laboratory of Oil & Gas Reservoir Geology and Exploitation, Southwest Petroleum University, Chengdu 610500, Sichuan, China
  • 2Shale Gas Research Institute, PetroChina Southwest Oil and Gas field Company, Chengdu 610051, Sichuan, China
Published: 2026-02-28 doi: 10.12090/j.issn.1006-6616.2025145
Outline
收藏切换
Objective

The geometry of multi-stage hydraulic fractures in shale gas horizontal wells is influenced by the three-dimensional in-situ stress distribution. The single-well stress profile serves as a crucial basis for predicting fracture height, and both the effective stress coefficient (Biot's coefficient) and the vertical grid resolution significantly impact the interpreted stress profile, consequently affecting the accuracy of fracture height prediction.

Methods

This study employs different Biot's coefficients (constant values and functions varying with logs) and vertical grid resolutions to compute stress profiles. It simulates and analyzes the differences in planar 3D fracture geometries under various stress profiles, systematically investigating the influence of Biot's coefficient on the stress profile and fracture geometry, and subsequently optimizing the vertical grid resolution and the method for interpreting Biot's coefficient.

Results

The results indicate that as Biot's coefficient decreases, the variation amplitude of the vertical in-situ stress profile increases, thereby restricting the vertical propagation capability of hydraulic fractures. Increasing the vertical grid resolution in the fracturing model helps to reduce the influence range of stress extremes; a 1 m vertical grid resolution achieves a favorable balance between simulation efficiency and accuracy. The Biot's coefficients calculated using empirical formulas and the poroelastic model yield similar results, with errors relative to laboratory measurements ranging from 3.68% to 3.93%. These methods provide a better match to stress test results from different formations. Furthermore, the simulated fracture heights using these variable coefficients align more closely with actual downhole fracture height monitoring results compared to using a constant Biot's value, showing errors of 8.64% to 9.94% compared to microseismic monitoring results from a vertical-to-horizontal well at the same site.

Conclusions

Through the analysis of initial in-situ stress fitting accuracy and the subsequent correspondence between simulated fracture height and monitoring data, it can be concluded that selecting an appropriate Biot's coefficient enables more realistic predictions of in-situ stress distribution and fracture propagation geometry.[Significance] This study provides valuable insights for future stress distribution calculations and fracture height predictions in shale gas wells through an in-depth discussion on the effects of Biot's coefficient and vertical grid resolution.

shale gas  /  hydraulic fracturing  /  in-situ stress profile  /  Biot coefficient  /  fracture height
张晨曦, 唐慧莹, 唐裕鑫, 陈月, 邓文斌. 考虑有效应力系数影响下地应力变化对页岩裂缝扩展影响研究. 地质力学学报, 2026 , 32 (1) : 197 -212 . DOI: 10.12090/j.issn.1006-6616.2025145
Chenxi ZHANG, Huiying TANG, Yuxin TANG, Yue CHEN, Wenbin DENG. Study on the influence of in-situ stress changes on shale fracture propagation considering the effect of effective stress coefficients[J]. Journal of Geomechanics, 2026 , 32 (1) : 197 -212 . DOI: 10.12090/j.issn.1006-6616.2025145
  • This research was financially supported by the General Program of the National Natural Science Foundation of China (Grant No.52374043) and the Sichuan Provincial Natural Science Foundation Program (Grant No. 2026NSFSCZY0097).
Year 2026 volume 32 Issue 1
69
32
Cite this Article
BibTeX
Article Info
doi: 10.12090/j.issn.1006-6616.2025145
  • Receive Date:2025-09-30
  • Online Date:2026-11-13
  • Published:2026-02-28
Article Data
Affiliations
History
  • Received:2025-09-30
  • Revised:2025-11-30
  • Accepted:2026-01-19
Funding
This research was financially supported by the General Program of the National Natural Science Foundation of China (Grant No.52374043) and the Sichuan Provincial Natural Science Foundation Program (Grant No. 2026NSFSCZY0097).
Affiliations
    1State Key Laboratory of Oil & Gas Reservoir Geology and Exploitation, Southwest Petroleum University, Chengdu 610500, Sichuan, China
    2Shale Gas Research Institute, PetroChina Southwest Oil and Gas field Company, Chengdu 610051, Sichuan, China
References
Share
https://castjournals.cast.org.cn/joweb/dzlxxb/EN/10.12090/j.issn.1006-6616.2025145
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT