收藏切换
Research on disease prevention risk assessment in medical institutions under the pilot program of disease control supervisor system: A comprehensive application based on the Delphi method, FMEA, and Borda ranking method
收藏切换
Ze-lin XIANG1, Xiao-liao WANG2, Jia-liang XU3, Jin-qi LU4, Hui-fang LIN5, Hao-yue ZHOU4, Xiao-fei FU1, Lei JIA4, Fen-juan SHI4, Guo-ying ZHU1
Modern Preventive Medicine | 2026, 53(4) : 676 - 681
Less
收藏切换
Modern Preventive Medicine | 2026, 53(4): 676-681
• Health Policy and Management •
Research on disease prevention risk assessment in medical institutions under the pilot program of disease control supervisor system: A comprehensive application based on the Delphi method, FMEA, and Borda ranking method
Full
Ze-lin XIANG1, Xiao-liao WANG2, Jia-liang XU3, Jin-qi LU4, Hui-fang LIN5, Hao-yue ZHOU4, Xiao-fei FU1, Lei JIA4, Fen-juan SHI4, Guo-ying ZHU1
Affiliations
  • The Center for Disease Control and Prevention of Jiaxing City, Jiaxing, Zhejiang 314050, China
Published: 2026-02-25 doi: 10.20043/j.cnki.MPM.202507478
Outline
收藏切换
Objective

To provide a basis for formulating response strategies under the pilot program of the disease control supervisor system, research on disease prevention risk assessment in medical institutions is conducted.

Methods

In the pilot work of the disease control supervisor system in medical institutions, the Delphi method, FMEA, and Borda rank method were used to conduct risk evaluation, and ranking of the likelihood, severity, and detectability of disease prevention risks.

Results

10 primary and 53 secondary medical institution disease prevention risk indicators have been constructed, and the risk levels have been classified and ranked:the 10 primary risks were ranked from high to low as infectious disease treatment and prevention and disinfection and isolation, infectious disease monitoring and epidemic reporting, medical waste disposal, pathogenic microorganism laboratory biosafety management, organizational management, facility equipment, personnel allocation and capacity building, infectious disease investigation and epidemic control, information construction and application, preventive vaccination, and others; Among the 53 secondary risks, the top 10 risks were in the following order: One person, one use, one disinfection or sterilization of medical devices>Epidemic control of infectious diseases within the institution=Infection control (protection and isolation)=Compliance with laboratory operating procedures>Professional quality and sense of responsibility of personnel=Implementation of pre examination and triage work system=Hand hygiene>Treatment of infectious disease patients>Prevention and control of key infectious diseases>Compliance with infectious disease epidemic reports in accordance with the law.

Conclusion

In the pilot work of the disease control supervisor system, this study comprehensively applied the Delphi method, FMEA, and Borda ordinal value method to evaluate disease prevention risks, enabling more potential disease prevention risks that are easily overlooked to be identified, warned, tracked, and intervened in a timely manner, forming a closed loop and promoting the integration of medical and prevention. This is a new thinking and method that can provide a reference for various regions.

Pilot work on the system of disease control supervisors  /  Disease prevention  /  Risk  /  Delphi consultation  /  FMEA  /  Borda count methods
向泽林, 王小辽, 许加亮, 陆锦琪, 林惠芳, 周浩月, 富小飞, 贾磊, 时粉娟, 朱国英. 疾控监督员制度试点下医疗机构疾病预防风险评估研究:基于Delphi法、FMEA与Borda序值法的综合应用. 现代预防医学, 2026 , 53 (4) : 676 -681 . DOI: 10.20043/j.cnki.MPM.202507478
Ze-lin XIANG, Xiao-liao WANG, Jia-liang XU, Jin-qi LU, Hui-fang LIN, Hao-yue ZHOU, Xiao-fei FU, Lei JIA, Fen-juan SHI, Guo-ying ZHU. Research on disease prevention risk assessment in medical institutions under the pilot program of disease control supervisor system: A comprehensive application based on the Delphi method, FMEA, and Borda ranking method[J]. Modern Preventive Medicine, 2026 , 53 (4) : 676 -681 . DOI: 10.20043/j.cnki.MPM.202507478
Year 2026 volume 53 Issue 4
32
18
Cite this Article
BibTeX
Article Info
doi: 10.20043/j.cnki.MPM.202507478
  • Receive Date:2025-07-31
  • Online Date:2026-11-02
  • Published:2026-02-25
Article Data
Affiliations
History
  • Received:2025-07-31
Funding
Affiliations
    The Center for Disease Control and Prevention of Jiaxing City, Jiaxing, Zhejiang 314050, China
References
Share
https://castjournals.cast.org.cn/joweb/xdyfyx/EN/10.20043/j.cnki.MPM.202507478
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT