This review focuses on recent progress in optimizing the energy storage performance of dielectric ceramic and indicates the correlation between performance and the designed microstructure. Principles and key parameters of dielectric energy storage are described, and optimized strategies on microstructure with improving energy storage performance are briefly collected, named domain engineering, grain refining strategy, textured ceramic design, multi-phase engineering, core-shell structure design, and multilayer structural design. Conclusion with existing challenges and perspectives of microstructure control on optimizing energy storage performance dielectric ceramic are finally presented.

In aerospace, high strength and toughness titanium alloys (HSTTAs) formed by additive manufacturing (AM) are mostly utilized to create complex shaped structural components. It can fulfill the bespoke design specifications of components, enhance material consumption and production efficiency, and decrease costs and time. As the requirement for safety and stability in structural components rises, damage tolerance performance (DTP) has emerged as the design benchmark for titanium alloys in aviation. This review initially presents the historical evolution of HSTTAs and subsequently discusses related research on the HSTTAs formed by AM. This review covers recent research advancements on the DTP of HSTTAs formed by AM, detailing the deformation behavior, fracture toughness, and fatigue crack propagation characteristics of the alloy. The primary approaches for enhancing the DTP of HSTTAs formed by AM, including process parameter optimization and heat treatment, are examined. Finally, the existing problems on current research and prospective research directions are identified. Investigating the DTP of HSTTAs formed by AM can enhance the overall performance of materials and guarantee structural integrity, while also fostering innovation in AM and propelling technological advancement. And it provides certain reference significance for upgrading AM processes and post-treatment processes, optimizing properties, and developing new high damage tolerant titanium alloys.

Two-dimensional clay-based materials have shown significant potential in key electrochemical processes, including hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and oxygen reduction reaction (ORR). Two-dimensional clay-based materials possess intrinsic properties such as porous structures, tunable specific surface areas, excellent thermal and mechanical stability, abundant reserves, and cost-effectiveness. However, limited electrocatalytic activity of two-dimensional clay-based materials remains a major challenge. The issue is closely tied to microscopic structures, including spin states, orbital hybridization, energy band alignment, and lattice stability of two-dimensional clay-based materials. The review delves into the relationship between modified two-dimensional clay-based materials and catalytic performance, summarizing strategies such as defect engineering and heteroatom doping to enhance orbital overlap, thereby improving HER, OER, and ORR activities. Finally, this review discusses the development prospects of clay-based materials, emphasizing the critical role of combining advanced computational and experimental techniques in driving innovations in energy conversion materials.

This paper presents a systematic review of biomedical Ti alloys fabricated through additive manufacturing. It begins with an overview of the development of Ti metals and their applications in biomedical fields, particularly in orthopedic and dental implants. The review highlights recent advancements, such as the incorporation of porous structures. Key aspects of additive manufacturing for biomedical Ti alloys are explored, including material characteristics, preparation parameters, solidification behavior, and post-heat treatments, with emphasis on their effects on microstructure and material properties. This paper further summaries the current states of biomedical standards for Ti alloys, and concludes with a discussion of future trends, opportunities, and challenges in the additive manufacturing of biomedical Ti alloys, including advancements in material innovation, process optimization, and the integration of personalized implants. This review aims to provide valuable insights into the ongoing developments and future directions for additive manufacturing biomedical Ti alloys.

Failure of lithium-ion batteries (LIBs) under subfreezing conditions limits their further development in aerospace and military applications, including severe capacity degradation, poor charge ability, and safety issue. Sluggish electrochemical reaction kinetics in the cathode-electrolyte interphases (CEI) would restrict the diffusion transfer of electric charge and Li⁺ ions, which is regarded as the main factor contributing to the low-temperature electrochemical failure issue. This review introduces and discusses the latest important interfacial CEI engineering on the layered oxide cathode in enhancing the low-temperature performance of LIBs based on the electrolyte modulation strategies. Firstly, the interfacial issues of layered oxide cathodes and the formation mechanism of CEI film under subzero temperatures are introduced. Secondly, recent progress about the interfacial engineering on inducing CEI construction under low temperature is summarized in terms of the components mainly involved in anions of Li salt, solvent molecule and additive. Thirdly, considering the unique composition and structure of CEI films, advanced interfacial characterization techniques and analysis are summarized. Finally, a perspective of electrolyte design matched with layered cathode materials in low-temperature LIBs is further presented, which may supply a new sight into designs and manufacture of LIBs and other devices for subzero-temperature applications.

New materials, crucial for economic and technological progress, are prioritized globally with strategies to accelerate their advancement through big data and AI. AI for Materials (AI4Mater) serves as an overall framework for integrating AI into Materials Science and Engineering, which is structured around three main elements: materials data infrastructure, AI4Mater techniques, and applications. This article reviews the development procedure and recent innovations in materials data infrastructure, machine learning in materials, autonomous experiment, intelligent computation, and intelligent manufacture. These efforts aim to foster open access to AI resources and enhance the collective advancement of materials science, ultimately accelerating breakthroughs and elevating the engineering application of new materials in a sustainable manner.

The accurate knowledge of liquid properties for Ti-Al based alloys is of great significance for scientific explorations such as revealing the atomic-scale behaviors in alloy processing and realizing the optimization of manufacture technology. By means of the active learning method based on deep neural network (DNN) and electromagnetic levitation technology (EML), we investigate the microstructure evolution of Ti₄₇Al₄₇Zr₆ alloy, and with a focus on obtaining its liquid state properties. The density, surface tension, viscosity of this liquid alloy and the related self-diffusion coefficient are predicted by the DNN potential. The calculated surface tension exhibits only a deviation of less than 2 % as compared with EML experimental values. The liquid local structure characteristics acquired through Voronoi polyhedron analysis indicate that the fraction of relatively high-coordinated clusters with Al as the central atom displayed an anomalous decrease with the falling of liquid temperature. This effect is attributed to the tendency of these clusters to form icosahedral-like geometries, resulting in an increased fraction of icosahedral-like geometries in liquid alloy.

Three-dimensional printing technology provides substantial developmental advantages for silicone rubber, such as enhanced precision, the ability of fabricating intricate structures, and accelerated manufacturing processes. This review first offers an overview of 3D printing technology and its commonly used materials, with a particular emphasis on diverse materials introduced in recent years, especially those suitable for high-performance elastomers such as silicone rubber. It then comprehensively analyzes the characteristics, advantages, and challenges of 3D printed silicone rubber, including its processing adaptability and molding performance. A detailed discussion follows the characterization techniques, including mechanical testing, electron microscopy, thermal analysis, and scattering methods, which are used to evaluate the microstructure, mechanical properties, and thermal stability of the printed materials. Finally, the review explores the application of neutron scattering techniques in studying 3D printed silicone rubber, highlighting how these methods deepen the understanding of the material's microstructure, particularly in terms of polymer chain configuration and molecular dynamics. By integrating the latest advancements, this review aims to serve as a valuable reference for design, optimization, and industrial implementation of 3D printed silicone rubber.

Self-assembled monolayers (SAMs) have emerged as an effective and promising interface engineering approach to enhance the performance and stability in perovskite solar cells (PVSCs). In recent years, they have gained significant attention due to their advantages of minimal light absorption, low material consumption, simple processing, and conformal coating. By optimizing the energy level alignment, suppressing interface defects, boosting charge extraction, and improving resistance to moisture and oxygen, highly efficient and stable PVSCs have been successfully achieved. In this review, we provide a comprehensive summary of the development and progress of SAMs for interfacial engineering in PVSCs. We specifically discuss strategies for growing high-quality SAM films on various interfaces with desired properties, highlighting the key principles for selecting, designing, and optimizing SAMs for different interfaces in the context of device fabrication. Finally, we offer perspectives on the future development of SAMs to further enhance PVSC performance and stability, thereby advancing their commercialization.

With the continuous increase in operating speed of high-speed trains, enhanced safety and stability in braking systems are necessitated. Copper-based friction materials (CBFMs) are predominantly utilized in brake pads for high-speed trains exceeding 300 km/h. Substantial braking energy is dissipated by CBFMs through direct interaction with counterpart materials, and their pivotal role in maintaining the safety and reliability of high-speed braking systems is ensured. The components and intrinsic properties, the multiple variations at the interface, and the distinctive characteristics of brake conditions are regarded as the primary factors influencing the braking properties of CBFMs. Recent advancements in CBFMs and tribological properties are systematically explored in this review from three critical perspectives: components, interfaces, and tribo-layers. Firstly, the emerging trends in matrix, lubricant components, and abrasive components in CBFMs are detailed. Secondly, the correlation between interfacial and tribological properties at both micro and macro scales is investigated. Thirdly, the characteristics of tribo-layers at different scales and the associated wear mechanisms of CBFMs are examined. Lastly, the challenges CBFMs face and the constraints of multi-component synergistic design, evaluation methodologies, and novel wear mechanisms are highlighted.