收藏切换
Study on the adaptability of medium speed coal mill to mill bio-mass pellets
收藏切换
PDF
Zhihua DU1, Zhichao WANG2, Xiangyu ZHANG2, Xuebin WANG1, Zhiyuan LIANG1, Shunli FANG3, Yuhang LI1, 2, Jiali LIU3, Guangqin ZHOU2, Zixiu JIA2, Qinghang JIAO4, Baogeng HAN4, Xilai ZHANG2, Wei YAO2
Thermal Power Generation | 2023, 52(7) : 56 - 63
Less
收藏切换
Thermal Power Generation | 2023, 52(7): 56-63
CO2 emission reduction technologies for coal-fired power plants
Study on the adaptability of medium speed coal mill to mill bio-mass pellets
Full
Zhihua DU1, Zhichao WANG2, Xiangyu ZHANG2, Xuebin WANG1, Zhiyuan LIANG1, Shunli FANG3, Yuhang LI1, 2, Jiali LIU3, Guangqin ZHOU2, Zixiu JIA2, Qinghang JIAO4, Baogeng HAN4, Xilai ZHANG2, Wei YAO2
Affiliations
  • 1.School of Energy and Power Engineering, Xi'an Jiaotong University, Xi'an 710049,China
  • 2.Shaanxi Engineering Research Center of Coal-fired Boiler Environmental Protection, Xi'an 710000, China
  • 3.Xi'an Thermal Power Research Institute Co., Ltd., Xi'an 710054, China
  • 4.Huaneng Chaohu Power Plant, Chaohu 238015, China
Published: 2023-07-25 doi: 10.19666/j.rlfd.202305071
Outline
收藏切换

The combustion of biomass will not increase carbon dioxide emissions, and the development of biomass coal coupled power generation technology is a feasible way to accelerate the transformation and upgrading of electricity. The compressed biomass and coal powder are ground in different coal mills without mixing, and are fed into the furnace by different burners. This method does not require additional biomass treatment equipment or setting up a biomass fuel treatment workshop, which can greatly save investment and factory space. The key limiting technical factor is whether the pulverizer of the power plant can effectively grind biomass Pellet fuel, and how to evaluate the adaptability of the existing pulverizer to the new coupling fuel. To this end, a medium speed coal mill experimental platform was built to analyze the adaptability of the medium speed coal mill in grinding biomass particles. The results show that the grinding output of the medium speed coal mill decreases when grinding wood chip biomass particles, and the effective output correction coefficient is 0.65~0.70; When the ZGM medium speed coal mill grinds sawdust particles, the loading force characteristics and separator characteristics both vary significantly at the particle size boundary of 0.2 mm. Therefore, the screening fineness R200 and R500 can be considered as the measurement standards for the uniformity of biomass particle materials ground by the coal mill; Compared with pulverized coal, the increase of loading force of milled biomass particles or the increase of rotating speed of the current separator has a large difference in the influence of fineness distribution, which needs further in-depth research.

biomass pellets  /  medium-speed coal mill  /  loading force  /  particle size distribution
Zhihua DU, Zhichao WANG, Xiangyu ZHANG, Xuebin WANG, Zhiyuan LIANG, Shunli FANG, Yuhang LI, Jiali LIU, Guangqin ZHOU, Zixiu JIA, Qinghang JIAO, Baogeng HAN, Xilai ZHANG, Wei YAO. Study on the adaptability of medium speed coal mill to mill bio-mass pellets[J]. Thermal Power Generation, 2023 , 52 (7) : 56 -63 . DOI: 10.19666/j.rlfd.202305071
  • National Key Research and Development Program(2020YFC1910000)
Year 2023 volume 52 Issue 7
PDF
54
6
Cite this Article
BibTeX
Article Info
doi: 10.19666/j.rlfd.202305071
  • Receive Date:2023-05-12
  • Online Date:2026-01-26
  • Published:2023-07-25
Article Data
Affiliations
History
  • Received:2023-05-12
Funding
National Key Research and Development Program(2020YFC1910000)
Affiliations
    1.School of Energy and Power Engineering, Xi'an Jiaotong University, Xi'an 710049,China
    2.Shaanxi Engineering Research Center of Coal-fired Boiler Environmental Protection, Xi'an 710000, China
    3.Xi'an Thermal Power Research Institute Co., Ltd., Xi'an 710054, China
    4.Huaneng Chaohu Power Plant, Chaohu 238015, China
References
Share
https://castjournals.cast.org.cn/joweb/rlfd/EN/10.19666/j.rlfd.202305071
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT