Science & Technology Review
|
2015, 33(22): 60-64
• Articles •
Improving transport performance of paste with pumping agent and optimization of mixing proportion
Full
AI Chunming1, WU Aixiang1, WANG Hongjiang1, YANG Xixiang2, ZHOU Falu2
Affiliations
1. The Key Laboratory of High-Efficient Mining and Safety of Metal Mines, Ministry of Education, University of Science and Technology Beijing, Beijing 100083, China;
2. Zhaojin Mining Jiashi County Copper Hui Mining Limited Liability Company, Kashgar 844300, China
Published: 2015-11-28
doi: 10.3981/j.issn.1000-7857.2015.22.009
Outline
Pumping agents are added in the laboratory experiments to improve the poor fluidity of the paste. The influences of five different kinds of pumping agents on the flow properties are investigated by comparing the slumps and the slump flow. The result of test shows that the pumping agent C has the greatest effect with the best adding range of 2.0%-2.5%. The fitting result of the uniform design shows that the concentration and the aggregate ratio tail are negatively correlated with the liquidity and the sand-cement ratio is positive. Based on the fitting equation, the recommended mixing proportion of the paste is derived: The concentration of 77.5%- 78.5%, the aggregate ratio of 4.5-5.5, the amount of the pumping agent of 2.0% (quality of the cement), the sand-cement ratio of 8. The results of the confirmatory experiment show that the actual requirements are met.
copper mining
/
pumping agent
/
paste transport
艾纯明, 吴爱祥, 王洪江, 杨锡祥, 周发陆.
泵送剂改善膏体输送性能及配比优化.
科技导报,
2015
, 33
(22)
: 60
-64
.
DOI: 10.3981/j.issn.1000-7857.2015.22.009
AI Chunming, WU Aixiang, WANG Hongjiang, YANG Xixiang, ZHOU Falu.
Improving transport performance of paste with pumping agent and optimization of mixing proportion[J].
Science & Technology Review,
2015
, 33
(22)
: 60
-64
.
DOI: 10.3981/j.issn.1000-7857.2015.22.009
Year 2015 volume 33 Issue 22
PDF
556
135
Cite this Article
BibTeX
Article Info
doi: 10.3981/j.issn.1000-7857.2015.22.009
- Receive Date:2015-04-10
- Online Date:2015-12-15
- Published:2015-11-28