Science & Technology Review
|
2015, 33(12): 67-71
• Articles •
Influence of insulation technology by plastic greenhouse on working temperature in aeration tank in cold area in winter
Full
ZHAO Songying, ZHAN Naiyan
Affiliations
School of Environmental and Municipal Engineering, Jilin Jianzhu University, Changchun 130118, China
Published: 2015-06-28
doi: 10.3981/j.issn.1000-7857.2015.12.011
Outline
For the problem of low temperature in cold regions and low working temperature in aeration tanks in sewage works, the heat preservation technology in greenhouses of wastewater works is studied by means of simulation to analyze the temperature distribution and air flowing features in greenhouses. Results show that under the condition of -22℃ outdoors in winter, through the insulation of the canopy towards the aeration tank, the average air temperature remains at 4℃ or so, while the water temperature of the outlet of the aeration tank remains at about 11.2℃; The optimal material of insulation membrane of the outside aeration tank is PO, while the most undesirable material is PVC, And PE and EVA are mediate; and the aeration tank of the best heat preservation is the one that uses greenhouse of 2.5 meter height. The effect of double insulation membranes is better than that of a single membrane.
severe cold area
/
heat insulation of greenhouse
/
aeration tank
/
working temperature
赵嵩颖, 战乃岩.
严寒地区冬季大棚保温对曝气池工作温度的影响.
科技导报,
2015
, 33
(12)
: 67
-71
.
DOI: 10.3981/j.issn.1000-7857.2015.12.011
ZHAO Songying, ZHAN Naiyan.
Influence of insulation technology by plastic greenhouse on working temperature in aeration tank in cold area in winter[J].
Science & Technology Review,
2015
, 33
(12)
: 67
-71
.
DOI: 10.3981/j.issn.1000-7857.2015.12.011
Year 2015 volume 33 Issue 12
PDF
556
150
Cite this Article
BibTeX
Article Info
doi: 10.3981/j.issn.1000-7857.2015.12.011
- Receive Date:2014-11-28
- Online Date:2015-07-15
- Published:2015-06-28