Home Journals Articles Updates About
CN
image
收藏切换
Research progress of 3D printing orthopedic insoles
收藏切换
PDF
Science & Technology Review | 2022, 40(13) : 57 - 64
Less
收藏切换
Science & Technology Review | 2022, 40(13): 57-64
• Exclusive: Intelligent Manufacture •
Research progress of 3D printing orthopedic insoles
Full
MA Lifang1,2, WANG Lichao3, LI Jian4, TAO CHunjing1, ZHANG Ming5, FAN Yubo1
Affiliations
    1. School of Biological Science and Medical Engineering, School of Medical Technology and Engineering, Beijing Advanced Innovation Center for Biomedical Engineering, Beihang University, Beijing 100083, China;
    2. Beijing Key Laboratory of Rehabilitation Technical Aids for Old-Age Disability, National Research Center for Rehabilitation Technical Aids, Beijing 100176, China;
    3. Key Laboratory of Bio-based Material Science and Technology of Ministry of Education, Northeast Forestry University, Harbin 150040, China;
    4. School of Automation, Beijing University of Posts and Telecommunications, Beijing 100876, China;
    5. Biomedical Engineering Department, the Hong Kong Polytechnic University, Hong Kong 999077, China
Published: 2022-07-13 doi: 10.3981/j.issn.1000-7857.2022.13.006
Outline
收藏切换
Compared with the traditional manufacturing methods of orthopedic insoles, 3D printing orthopedic insoles are intensive and efficient. However, there are still some problems in design, printing, materials and so on, and there is a lack of systematic research review. Based on the manufacturing methods of orthopedic insoles, this paper summarizes the printing technology, printing materials and research status of 3D printing orthopedic insoles, and analyzes the existing problems in the research of 3D printing orthopedic insoles. The future development trend of 3D printing orthopedic insoles is forecasted in terms of the improvement of orthopedic insoles performance and the development of modern science and technology.
orthopedic insole  /  manufacturing process  /  3D printing  /  orthosis  /  rehabilitation aids  /  material properties
MA Lifang, WANG Lichao, LI Jian, TAO CHunjing, ZHANG Ming, FAN Yubo. Research progress of 3D printing orthopedic insoles[J]. Science & Technology Review, 2022 , 40 (13) : 57 -64 . DOI: 10.3981/j.issn.1000-7857.2022.13.006
Appendix
Less
Year 2022 volume 40 Issue 13
PDF
955
291
Cite this Article
BibTeX
Article Info
doi: 10.3981/j.issn.1000-7857.2022.13.006
  • Receive Date：2021-04-26
  • Online Date：2022-09-02
  • Published：2022-07-13
Article Data
Affiliations
History
  • Received：2021-04-26
  • Revised：2021-08-09
Affiliations
References
Share
https://castjournals.cast.org.cn/joweb/kjdb/EN/10.3981/j.issn.1000-7857.2022.13.006
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family		 属数
Number of
genus		 种数
Number of
species		 占总种数比例
Percentage of
total species (%)		 属
Genus		 种数
Number of
species		 占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT
Links
Articles
Latest Articles
Most Read
Collections
Updates
Events
News
Multimedia
About
About Us
Contact
No. 86 Xueyuan South Road, Haidian District, Beijing
100081
010-62199257
qkjq@cast.org.cn

Copyright © 2025 China Association for Science and Technology. All rights reserved. For all open access content, the relevant licensing terms apply.
Sponsored by the Office of the Leading Group for Cybersecurity and Informatization of CAST, and supported by Science and Technology Review Publishing House