收藏切换
Full-factor design of experiment application in the development of printing ink for binder jetting 3D printed preparation
收藏切换
PDF
Zeng-ming WANG, Xian-fu LI, Xiao-lu HAN, Ai-ai LIU, Xiao-xuan HONG, Cong-hui LI, Ai-ping ZHENG*
Acta Pharmaceutica Sinica | 2021, 56(5) : 1460 - 1469
Less
收藏切换
Acta Pharmaceutica Sinica | 2021, 56(5): 1460-1469
Original Articles
Full-factor design of experiment application in the development of printing ink for binder jetting 3D printed preparation
Full
Zeng-ming WANG, Xian-fu LI, Xiao-lu HAN, Ai-ai LIU, Xiao-xuan HONG, Cong-hui LI, Ai-ping ZHENG*
Affiliations
  • Institute of Pharmacology and Toxicology, Academy of Military Medical Sciences, Academy of Military Sciences, Beijing 100850, China
Published: 2021-05-12 doi: 10.16438/j.0513-4870.2020-1904
Outline
收藏切换

The development of printing ink is a challenge for binder jetting 3D printed preparations, which directly determines the quality of the printed product. This study adopted a 23 full-factor Design of Experiment (DoE) with three central points to optimize the printing ink composition of levetiracetam 3D printed dispersible tablet based on the concept of Quality by Design. Firstly, using polyvinyl pyrrolidone K30, glycerin and polysorbate 20 as independent variables based on 40% (v/v) isopropanol aqueous solution, and weight variation, hardness, friability and dispersion uniformity of the printed tablets were used as dependent variables. Then obtained the design space of the printing ink prescription by DoE model analysis, and the response optimizer was used to obtain the optimal printing ink prescription: isopropanol aqueous solution containing 0.1% (w/w) polyvinyl pyrrolidone K30 and 4.0% (w/w) glycerin. The jetting mechanism and wettability of the printing ink were analyzed, and different strengths of personalized 3D printed tablets were prepared and characterized, which verified the rationality of the printing ink formulation. This study provided a reference for the development of printing ink for binder jetting 3D printed preparations.

binder jetting technology  /  3D printing  /  levetiracetam dispersible tablet  /  printing ink  /  design space  /  jetting mechanism
Zeng-ming WANG, Xian-fu LI, Xiao-lu HAN, Ai-ai LIU, Xiao-xuan HONG, Cong-hui LI, Ai-ping ZHENG. Full-factor design of experiment application in the development of printing ink for binder jetting 3D printed preparation[J]. Acta Pharmaceutica Sinica, 2021 , 56 (5) : 1460 -1469 . DOI: 10.16438/j.0513-4870.2020-1904
Year 2021 volume 56 Issue 5
PDF
155
58
Cite this Article
BibTeX
Article Info
doi: 10.16438/j.0513-4870.2020-1904
  • Receive Date:2020-12-10
  • Online Date:2025-12-18
  • Published:2021-05-12
Article Data
Affiliations
History
  • Received:2020-12-10
  • Revised:2021-01-15
Funding
Affiliations
    Institute of Pharmacology and Toxicology, Academy of Military Medical Sciences, Academy of Military Sciences, Beijing 100850, China
References
Share
https://castjournals.cast.org.cn/joweb/yxxb/EN/10.16438/j.0513-4870.2020-1904
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT