Latest ArticlesPerforming various corrections to the measured gravity values relative to a datum plane serves as a necessary step in obtaining the values of Bouguer gravity anomalies. Currently, the various corrections of large-scale gravity survey data primarily follow the requirements and methods of regional gravity surveys. The obtained Bouguer gravity anomalies often contain false anomalies, failing to accurately interpret the relevant properties and details of targets. Moreover, there exists neither systematic research on the variable-density terrain correction for large-scale gravity survey data nor publicly available variable-density correction calculation software. Therefore, this study proposed a set of fine-scale correction methods for large-scale gravity survey data. Specifically, the traditional datum plane for various corrections was elevated. Based on the rating of density property data, the variable-density generalized terrain correction method was employed to integrally calculate the values of traditional terrain and intermediate layer corrections. The Li-Gotze96 equation was applied to integrally calculate the values of traditional latitude and height corrections, as well as the height correction value based on the custom datum plane. A new equation for calculating the value of Bouguer gravity anomalies was derived. Moreover, the universal gravity survey correction calculation software was developed accordingly. The verification based on simulated and measured data shows that these methods can significantly reduce false anomalies within the Bouguer gravity anomalies and their association with terrains, thereby highlighting the anomaly characteristics of the targets and revealing richer anomaly details.
Porosity serves as a crucial reservoir parameter for hydrocarbon exploration. This study constructed a mathematical model integrating Gassmann's equation and Eshelby-Walsh theory. Using this model, an objective function was derived and established for direct porosity inversion relying on the inverted high-precision pre-stack elastic parameters from pre-stack seismic data with a high signal-to-noise ratio, thereby enabling the direct calculation of formation rock porosity. Within the framework of generalized linear inversion theory, using the precise Zoeppritz equation as the theoretical foundation, this study achieved the direct inversion of reservoir porosity by introducing well-logging data as constraints. Conventional porosity estimation methods rely on the indirect porosity estimation using parameters such as P- and S-wave velocities and density, resulting in multi-step error accumulation. To overcome this limitation, this proposed method allows direct input of seismic gathers and well-logging data. In addition, grounded on the theoretical advantages of the exact Zoeppritz equation in describing wavefield propagation, this method yielded inverted porosity results with higher resolution and accuracy compared to those obtained using conventional methods based on three-parameter empirical conversions. Application in actual data shows that the porosity data obtained from the well-logging constrained direct inversion of pre-stack elastic parameters align well with actual logging curves, demonstrating higher accuracy and resolution. The high-precision porosity data provide critical theoretical value and practical guidance for detailed reservoir prediction, well placement optimization, and the design of fracturing production schemes.
Shear wave velocity serves as a key parameter for characterizing the elastic properties of rocks and their sensitivity to fluids, playing a significant role in seismic wave impedance inversion, stratigraphic identification, and rock physics modeling. However, the limitations in acquisition costs and technologies often lead to data gaps or insufficient accuracy for shear wave velocity. Hence, this study proposed an intelligent method for predicting shear wave velocity by integrating the two-dimensional convolutional neural network (2DCNN), a state-space model, and a cross-attention mechanism. The 2DCNN and the state-space model can capture local spatial features and longitudinal temporal dependencies, respectively, while the cross-attention mechanism enables the deep fusion of spatial and temporal features, thereby enhancing the sensitivity of the network to key geological information. Additionally, to improve model explainability, an explanatory analysis method based on Shapley additive explanations (SHAP) was employed to quantify the contributions of different log parameters to the shear wave velocity prediction. Experimental results demonstrate that the proposed method outperformed traditional individual neural networks in both prediction accuracy and generalization capability. Moreover, it effectively revealed the physical relationships between shear wave velocity and conventional log parameters. Therefore, the proposed method provides a novel approach and technical support for rapidly and reliably predicting shear wave velocity under complex reservoir conditions.
Flexure structures are highly hazardous geological structures in underground coal mines. Their accurate identification and characterization have long been a technical challenge in the geological guarantee of the mines. Conventional seismic exploration methods struggle to achieve fine-scale identification of flexure structures due to their limitations in resolution and signal-to-noise ratio. In contrast, fully digital high-density 3D seismic exploration technology, characterized by wide frequency bands, wide azimuths, and high coverage frequency, can provide high-quality data for fine-scale interpretation of flexure structures. This study investigated a block in the Yangquan mining area. Using the fully digital, high-density 3D seismic exploration data, this study proposed and systematically implemented an offset vector tile (OVT)-domain split-offset coherence cube fusion technique. Specifically, the seismic data were classified into far-, moderate-, and near-offset intervals in the OVT domain. The coherence cubes in the three intervals were computed using the third-generation coherence (C3) algorithm. Furthermore, the attribute fusion technique was employed to integrate the split-offset coherence cube slices into a comprehensive coherence cube slice, enabling fine-scale characterization of the main flexure zone and other concealed structures within the study area. The results demonstrate that the identified flexure structures based on the proposed technique align with the actual wellbore exposures. By leveraging the rich azimuth and offset information in wide-azimuth seismic data, the proposed technique can effectively overcome the limitations of individual coherence cubes in terms of the multiplicity of solutions and resolution. Furthermore, by complementing and integrating seismic response characteristics across different offsets, this technique can significantly enhance the capability for fine-scale identification of flexure structures. Therefore, this study provides an effective technical approach for achieving transparent detection of concealed geological hazards in coal mines.
Porosity is a critical parameter for characterizing reservoir physical properties. The accuracy of porosity prediction holds significant implications for hydrocarbon exploration and production, as well as the geological modeling and fine-scale evaluation of hydrocarbon reservoirs. Considering the characteristics of tight sandstone reservoirs, such as low porosity, low permeability, and strong heterogeneity, this study proposed a reservoir porosity prediction model that integrates the convolutional neural network (CNN) and bidirectional long short-term memory(BiLSTM). The CNN-BiLSTM model is used to extract features from log data and establish complex nonlinear correlations between these features and porosity parameters. First, using petrophysical models, sensitive elastic parameters, which are significantly correlated with porosity, are selected as input parameters. Second, the spatially dependent features are extracted from the inversion data using the CNN. Third, the temporal dependencies throughout the data sequence are captured by BiLSTM. These processes contribute to effective porosity prediction. The test results of three wells in oilfield A, Kaiping sag, demonstrate that compared to conventional deep learning methods, the CNN-BiLSTM model achieved higher accuracy and lateral resolution in porosity prediction, verifying its effectiveness. Furthermore, the CNN-BiLSTM model was applied for the 3D reservoir porosity prediction by calculating the porosity data volume from elastic parameter volumes obtained through reservoir inversion. Overall, this study provides a novel approach for predicting reservoir porosity in the sparse well area of oilfield A, offshore Kaiping sag.
In potential field exploration, the Euler deconvolution method has been extensively utilized due to its minimal requirement for prior information. However, it yields significant dispersed results due to external interference. Based on a further investigation of the Euler deconvolution method, this study proposed a simple, effective finite-difference Euler deconvolution method for determining the depth and structural index of field sources. The proposed method leveraged the linear relationship between depth and structural index in the Euler equation. Combining data from multiple continuation heights at potential field source locations, a system of equations was constructed using the finite difference method to solve for coefficients, thereby determining the depth and structural index of field sources. The inversion was limited to potential horizontal locations of field sources, effectively reducing the number of inversion results. Additionally, the strategy of combining data from different heights for inversion mitigated the impacts of noise and other disturbances. Finally, the proposed method proved effective through model experiments and actual data.
The clay-type lithium ores, a significant lithium resource in China, contain lithium and other elements such as aluminum and silicon. Their molecular formulas are expressed as LiAl [SinO2n+2] and Li [AlSinO2n+2] in this study. The latter formula represents the ion-absorbed lithium ores, from which lithium ions can be readily extracted in leaching experiments. This study explores an environment-friendly, economical, normal-temperature in situ leaching technique for clay-type lithium ores, which requires that the chemical properties of lithium ores remain unchanged before leaching experiments. The contents of various elements, loss on ignition, and porosity (massive ores) of clay-type lithium ores were analyzed through the column leaching experiments. Three leaching reagents were used: 10% sulfuric acid solution, 10% ammonium sulfate solution, and a mixture of 5% sulfuric acid solution and 5% ammonium sulfate solution. The total leaching process lasted for 190 d. The concentrations of lithium and aluminum were determined at regular intervals. The experimental results show that the porosities of the clay-type lithium ores ranged from 0.38% to 6.20%. The first and third reagents demonstrated higher leaching efficiency, achieving a Li2O leaching rate of up to 0.56% without refilling fresh reagents, whereas the leaching efficiency of the second reagent was not satisfactory. Notably, in the case of a reduced ore size, the third mixed leaching solution yielded the same leaching efficiency as the first high-concentration sulfuric acid solution. Overall, this study provides a practical in situ leaching technique for clay-type lithium ores in mines.
The ocean bottom node (OBN) boasts the advantages of more flexible deployment, better seabed coupling, and higher signal-to-noise ratio (SNR). However, the non-real-time acquisition mode also raises many challenges for quality control. These include cumbersome verification of the OBN clock drift correction accuracy, as well as a lack of methods for accurately verifying the rotation accuracy of three-component geophone data after vector rotation and the OBN positioning accuracy after underwater towing events. This study extracted the information on near-offset first breaks from the OBN data to generate a four-component amplitude diagram through appropriate arrangement and difference calculation. By investigating the amplitude attributes under different conditions, targeted quality control was achieved. This method demonstrated excellent quality control effects in practical applications, making it an important tool for quality control in OBN acquisition.
Scholte waves serve as surface waves propagating at a fluid-solid interface, carrying abundant seabed information. They exhibit dispersion during propagation, which is primarily controlled by the parameters of both seawater and seabed. To investigate the influence of different marine environments on Scholte waves, this study first derived the equation expressing their dispersion characteristics based on a layered seabed model. Then, using the staggered-grid finite-difference (SGFD) method, it conducted forward modeling on several typical marine models. The dispersion characteristics of the theoretical Scholte wavefields were analyzed using the cross-correlation and phase-shifting (CCPS) method. The analysis results show that the dispersion characteristics of Scholte waves weakened with increased seawater depth. In addition, Scholte waves are highly sensitive to changes in the S-wave velocity of the medium that, in turn, exert a significant impact on the dispersion characteristics of Scholte waves. In the case of decreased S-wave velocity of the solid medium layers, the Scholte waves exhibited stronger dispersion, accompanied by significant changes in both energy and dispersion curves.
Waveform inversion refers to the process of inferring underground medium parameters using seismic wave data. For elastic media, the interdependency between P- and S-wave velocities and density parameters enhances the nonlinearity of multi-parameter waveform inversion, leading to crosstalk in the inversion results. Given this, this study proposed an automatic differentiation-based multi-parameter full waveform inversion method for elastic media constrained by nonlinear anisotropic diffusion regularization (NADR). To address the strong parameter coupling and high nonlinearity in multi-parameter inversion, this study added an anisotropic diffusion regularization term to the objective function. Then, it calculated gradients using automatic differentiation technology, followed by iterative optimization using a mini-batch strategy. Experimental results show that the NADR can effectively mitigate parameter crosstalk and improve the inversion stability.