收藏切换
Simulation of hydrogen storage performance in solid-state hydrogen storage reactor based on optimal arrangement of heat exchange tube bundles
收藏切换
PDF
Zeqi CHEN1, Hongmei CAO2, Zhongyu TIAN3, Min ZHANG4, Shiming ZHU4, Detai SHI4, Ming GAO1
Thermal Power Generation | 2024, 53(9) : 100 - 108
Less
收藏切换
Thermal Power Generation | 2024, 53(9): 100-108
Hydrogen storage technology
Simulation of hydrogen storage performance in solid-state hydrogen storage reactor based on optimal arrangement of heat exchange tube bundles
Full
Zeqi CHEN1, Hongmei CAO2, Zhongyu TIAN3, Min ZHANG4, Shiming ZHU4, Detai SHI4, Ming GAO1
Affiliations
  • 1.Shandong Engineering Research Center for High-efficiency Energy Storage and Hydrogen Energy Utilization, School of Energy and Power Engineering, Shandong University, Jinan 250061, China
  • 2.Huaneng Shandong Power Generation Co., Ltd., Jinan 250014, China
  • 3.Huaneng Qingdao Thermal Power Co., Ltd., Qingdao 266000, China
  • 4.Huaneng International Power Generation Co., Ltd. Rizhao Power Plant, Rizhao 276800‚ China
Published: 2024-09-25 doi: 10.19666/j.rlfd.202404071
Outline
收藏切换

To explore the heat and mass transfer process in a solid-state hydrogen storage reactor, a two-dimensional numerical calculation model for the reactor is developed. The radial reaction rate distribution characteristics of the solid-state hydrogen storage material within the reactor is investigated, and the influence laws of bed thickness of the hydrogen storage material and diameter of the heat exchange tube on saturation radius are also studied. Based on this, the arrangement of the heat exchange tube bundle is optimized. The results show that, the heat exchange tube has the corresponding maximum saturation radius, and it increases with the tube radius. When the tube radius is 1.00~6.00 mm with single-tube arrangement, the maximum saturation radius is 2.60, 3.30, 3.50, 3.70, 3.80 and 3.90 mm, respectively. The volume fraction of heat exchange tubes with radius of 1.00, 2.00 and 3.00 mm is relatively small, which is 7.72%, 14.24% and 21.30%. The optimal bed thickness between tubes is 4.86, 6.09 and 6.38 mm when arranging the above three types of tubes in a tube bundle. Moreover, adding heat exchange tube bundles can effectively improve the hydrogen storage performance of reaction dead zone in the reactor. In the reactor equipped with heat exchange tube bundles with radius of 2.00 mm, adding 12 heat exchange tubes with radius of 2.00 mm in the reaction deadzone can reduce the hydrogen storage time to 267 s (by 40.00%), while the volume fraction of tube bundle only increases by 1.92%, and the hydrogen storage capacity just decreases by 2.17%. The research findings can establish a fundamental basis for the optimal design of solid-state hydrogen storage reactors and offer valuable guidance for subsequent engineering applications.

solid state hydrogen storage  /  heat exchange tube bundles  /  hydrogen storage performance  /  saturation radius  /  numerical simulation
Zeqi CHEN, Hongmei CAO, Zhongyu TIAN, Min ZHANG, Shiming ZHU, Detai SHI, Ming GAO. Simulation of hydrogen storage performance in solid-state hydrogen storage reactor based on optimal arrangement of heat exchange tube bundles[J]. Thermal Power Generation, 2024 , 53 (9) : 100 -108 . DOI: 10.19666/j.rlfd.202404071
  • Science and Technology Project of China Huaneng Group Co., Ltd.(HNKJ24-HF36)
  • Natural Science Foundation of Guangdong Province(2023A1515012808)
Year 2024 volume 53 Issue 9
PDF
102
46
Cite this Article
BibTeX
Article Info
doi: 10.19666/j.rlfd.202404071
  • Receive Date:2024-04-10
  • Online Date:2026-03-06
  • Published:2024-09-25
Article Data
Affiliations
History
  • Received:2024-04-10
Funding
Science and Technology Project of China Huaneng Group Co., Ltd.(HNKJ24-HF36)
Natural Science Foundation of Guangdong Province(2023A1515012808)
Affiliations
    1.Shandong Engineering Research Center for High-efficiency Energy Storage and Hydrogen Energy Utilization, School of Energy and Power Engineering, Shandong University, Jinan 250061, China
    2.Huaneng Shandong Power Generation Co., Ltd., Jinan 250014, China
    3.Huaneng Qingdao Thermal Power Co., Ltd., Qingdao 266000, China
    4.Huaneng International Power Generation Co., Ltd. Rizhao Power Plant, Rizhao 276800‚ China
References
Share
https://castjournals.cast.org.cn/joweb/rlfd/EN/10.19666/j.rlfd.202404071
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT