收藏切换
Thermodynamic modeling and performance analysis for micro adiabatic compressed air energy storage system
收藏切换
PDF
Mengjie ZHANG1, Qiang LIU2, Tonghe ZHANG1, Yongxing SONG1, Linhua ZHANG1
Thermal Power Generation | 2024, 53(9) : 39 - 47
Less
收藏切换
Thermal Power Generation | 2024, 53(9): 39-47
Compressed air energy storage technology
Thermodynamic modeling and performance analysis for micro adiabatic compressed air energy storage system
Full
Mengjie ZHANG1, Qiang LIU2, Tonghe ZHANG1, Yongxing SONG1, Linhua ZHANG1
Affiliations
  • 1.School of Thermal Energy Engineering, Shandong Jianzhu University, Jinan 250000, China
  • 2.Jinan Special Equipment Inspection and Research Institute, Jinan 250101, China
Published: 2024-09-25 doi: 10.19666/j.rlfd.202404070
Outline
收藏切换

The arrangement of micro adiabatic compressed air energy storage (A-CAES) system is flexible and suitable for typical distributed energy systems. By accurately modelling a typical device of the miniature A-CAES system based on pneumatic motors, a thermodynamic model that can reflect its system performance is constructed. The experimental bench of the A-CAES system is built, and the average error rate between the simulation model and the experiment is around 5.38%, which verifies the reliability of the model. The round-trip efficiency and comprehensive efficiency of the system are 4.81% and 27.23%, respectively, verifying the necessity of the existence of thermal energy storage devices in the A-CAES system. The effects of compression level and compression ratio on the system performance are analyzed by using this model. The results show that, as the compression level increases, the round-trip efficiency and comprehensive efficiency of the system both increase, and the optimal efficiency of the system can reach 6.10% and 35.81%, respectively. Taking the combination of compression ratios of 2, 3, and 5 as an example, reasonable distribution of compression ratios can improve the round-trip efficiency and overall efficiency of the system by 1.27% and 4.38%, respectively.

micro  /  adiabatic compressed air energy storage  /  thermodynamic modeling  /  efficiency
Mengjie ZHANG, Qiang LIU, Tonghe ZHANG, Yongxing SONG, Linhua ZHANG. Thermodynamic modeling and performance analysis for micro adiabatic compressed air energy storage system[J]. Thermal Power Generation, 2024 , 53 (9) : 39 -47 . DOI: 10.19666/j.rlfd.202404070
  • Open Fund Project of State Key Laboratory of Compressor Technology (Anhui Provincial Laboratory of Compressor Technology)(SKL-YSJ202108)
  • Shandong Provincial Natural Science Foundation(ZR2021QE157)
Year 2024 volume 53 Issue 9
PDF
106
47
Cite this Article
BibTeX
Article Info
doi: 10.19666/j.rlfd.202404070
  • Receive Date:2024-04-12
  • Online Date:2026-03-06
  • Published:2024-09-25
Article Data
Affiliations
History
  • Received:2024-04-12
Funding
Open Fund Project of State Key Laboratory of Compressor Technology (Anhui Provincial Laboratory of Compressor Technology)(SKL-YSJ202108)
Shandong Provincial Natural Science Foundation(ZR2021QE157)
Affiliations
    1.School of Thermal Energy Engineering, Shandong Jianzhu University, Jinan 250000, China
    2.Jinan Special Equipment Inspection and Research Institute, Jinan 250101, China
References
Share
https://castjournals.cast.org.cn/joweb/rlfd/EN/10.19666/j.rlfd.202404070
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT