收藏切换
Effect of different flow channel structures on heat transfer performance of lead-bismuth eutectic-supercritical carbon dioxide heat exchangers
收藏切换
Yike NI, Hongzhi LI, Yu YANG, Yifan ZHANG, Shuaishuai WU, Yuhang HAN, Jiarong WU
Thermal Power Generation | 2025, 54(7) : 135 - 143
Less
收藏切换
Thermal Power Generation | 2025, 54(7): 135-143
• Power generation technology forum •
Effect of different flow channel structures on heat transfer performance of lead-bismuth eutectic-supercritical carbon dioxide heat exchangers
Full
Yike NI, Hongzhi LI, Yu YANG, Yifan ZHANG, Shuaishuai WU, Yuhang HAN, Jiarong WU
Affiliations
  • Xi’an Thermal Power Research Institute Co, Ltd, Xi’an 710054, China
Published: 2025-07-25 doi: 10.19666/j.rlfd.202410227
Outline
收藏切换

Improving the heat transfer efficiency between liquid lead-bismuth eutectic (LBE) and supercritical carbon dioxide (S-CO2) is of great significance for advancing the development of advanced nuclear energy systems. The heat transfer performance of printed circuit heat exchangers (PCHE) with different channel structures (straight shaped, wing-shaped, S-shaped and Z-shaped) is investigated through numerical simulation. The results show that the thermal resistance on cold side of the heat exchanger is significantly higher than that on the hot side, with the average heat transfer coefficient of the hot side in straight-channel PCHE being 26.2 times that of the cold side. Under the condition of a fixed hot-side channel structure, the effects of different cold-side channel structures on PCHE heat transfer performance are explored. The results indicate that, compared with straight channels, the heat transfer of Z-shaped, S-shaped and wing-shaped channels increases by 23.3%, 22.2%, and 10.6%, respectively, while the specific pumping power improves by 1.48 times, 1.68 times, and 1.44 times, respectively. In addition, the dynamic performance of different PCHE designs when the cold-side flow rate increases by 20% is compared, revealing that the straight-channel PCHE has the shortest rebalancing time. The pressure drop loss is more significant than the improvement in heat transfer. These findings provide theoretical guidance for optimizing the design of LBE/S-CO2 heat exchangers and contribute to enhancing the thermal efficiency of next-generation nuclear energy systems.

PCHE  /  S-CO2  /  LBE  /  thermal hydraulic characteristics
倪依柯, 李红智, 杨玉, 张一帆, 吴帅帅, 韩煜航, 吴家荣. 不同流道结构对铅铋-超临界二氧化碳换热器换热性能的影响. 热力发电, 2025 , 54 (7) : 135 -143 . DOI: 10.19666/j.rlfd.202410227
Yike NI, Hongzhi LI, Yu YANG, Yifan ZHANG, Shuaishuai WU, Yuhang HAN, Jiarong WU. Effect of different flow channel structures on heat transfer performance of lead-bismuth eutectic-supercritical carbon dioxide heat exchangers[J]. Thermal Power Generation, 2025 , 54 (7) : 135 -143 . DOI: 10.19666/j.rlfd.202410227
  • Innovation Capability Support Program of Shaanxi(2023-CX-TD-18)
Year 2025 volume 54 Issue 7
948
557
Cite this Article
BibTeX
Article Info
doi: 10.19666/j.rlfd.202410227
  • Online Date:2026-03-06
  • Published:2025-07-25
Article Data
Affiliations
History
  • Revised:2024-12-25
Funding
Innovation Capability Support Program of Shaanxi(2023-CX-TD-18)
Affiliations
    Xi’an Thermal Power Research Institute Co, Ltd, Xi’an 710054, China
References
Share
https://castjournals.cast.org.cn/joweb/rlfd/EN/10.19666/j.rlfd.202410227
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT