收藏切换
Dynamic modeling and variable load control optimization for 600 MW class ultra-supercritical coal-fired power generation units
收藏切换
PDF
Xi LIU1, 2, Zefeng LIU1, Chaoyang WANG1, Ming LIU1, Junjie YAN1
Thermal Power Generation | 2024, 53(10) : 97 - 105
Less
收藏切换
Thermal Power Generation | 2024, 53(10): 97-105
Thermal energy science research
Dynamic modeling and variable load control optimization for 600 MW class ultra-supercritical coal-fired power generation units
Full
Xi LIU1, 2, Zefeng LIU1, Chaoyang WANG1, Ming LIU1, Junjie YAN1
Affiliations
  • 1.State Key Laboratory of Multiphase Flow in Power Engineering, Xi’an Jiaotong University, Xi’an 710049, China
  • 2.Xi’an Thermal Power Research Institute Co., Ltd., Xi’an 710054, China
Published: 2024-10-25 doi: 10.19666/j.rlfd.202405091
Outline
收藏切换

To improve the control effect of key parameters and energy conversion efficiency of ultra-supercritical coal-fired power generation units during load cycling process, 600 MW class ultra-supercritical coal-fired power generation units are taken as the research objects to carry out modeling and verification. The deviation of key thermal parameters meets the specified range of thermal power simulation standard. The spatiotemporal distribution model of internal heat storage in thermal system of coal-fired power generation units is established, and the water-fuel ratio and flue gas damper opening control logic of the feedforward internal heat storage state of the unit are proposed. The real-time heat storage state of the unit during the load cycling process is fed forward to the flow rate of feed water, coal, and flue gas damper control. The simulation results show that, when the unit load cycling rate varies from 1.0% Pe/min to 3.0%Pe/min within 40%~70% THA load range, the absolute value of the cumulative main steam temperature deviation rate decreases by 27%~31%. The average power generation standard coal consumption rate of the unit decreases by 0.37~0.65 g/(kW·h) during the transient process. The proposed control strategies improve the control accuracy of key thermal parameters and the energy conversion efficiencies of the ultra-supercritical coal-fired power generation units during load cycling transient processes.

coal-fired power generation  /  variable load  /  steam temperature control  /  transient energy saving
Xi LIU, Zefeng LIU, Chaoyang WANG, Ming LIU, Junjie YAN. Dynamic modeling and variable load control optimization for 600 MW class ultra-supercritical coal-fired power generation units[J]. Thermal Power Generation, 2024 , 53 (10) : 97 -105 . DOI: 10.19666/j.rlfd.202405091
  • National Key Research and Development Program of China(2022YFB4100402)
Year 2024 volume 53 Issue 10
PDF
243
118
Cite this Article
BibTeX
Article Info
doi: 10.19666/j.rlfd.202405091
  • Receive Date:2024-05-10
  • Online Date:2026-03-05
  • Published:2024-10-25
Article Data
Affiliations
History
  • Received:2024-05-10
Funding
National Key Research and Development Program of China(2022YFB4100402)
Affiliations
    1.State Key Laboratory of Multiphase Flow in Power Engineering, Xi’an Jiaotong University, Xi’an 710049, China
    2.Xi’an Thermal Power Research Institute Co., Ltd., Xi’an 710054, China
References
Share
https://castjournals.cast.org.cn/joweb/rlfd/EN/10.19666/j.rlfd.202405091
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT