收藏切换
Off-design modeling of heat recovery steam generator in heavy-duty gas turbine combined cycle unit and variable load operation research
收藏切换
PDF
Yifeng WANG1, 2, Chunhua ZHAI3, Qing HUANG3, Chenhui NIU4, Xinmin SU4, Daoshun JIAO3, Henan PAN4, Qianyuan WANG3, Wei SUN3, Junfeng XIAO1, Mengqi HU1, Lin XIA1, Jun LI2
Thermal Power Generation | 2023, 52(12) : 79 - 89
Less
收藏切换
Thermal Power Generation | 2023, 52(12): 79-89
Thermal energy science research
Off-design modeling of heat recovery steam generator in heavy-duty gas turbine combined cycle unit and variable load operation research
Full
Yifeng WANG1, 2, Chunhua ZHAI3, Qing HUANG3, Chenhui NIU4, Xinmin SU4, Daoshun JIAO3, Henan PAN4, Qianyuan WANG3, Wei SUN3, Junfeng XIAO1, Mengqi HU1, Lin XIA1, Jun LI2
Affiliations
  • 1.Xi’an Thermal Power Research Institute Co., Ltd., Xi’an 710054, China
  • 2.School of Energy and Power Engineering, Xi’an Jiaotong University, Xi’an 710049, China
  • 3.Huaneng Nanjing Gas Turbine Power Plant Co., Ltd., Nanjing 210034, China
  • 4.Huanneng Jiangsu Energy Development Co., Ltd., Nanjing 210015, China
Published: 2023-12-25 doi: 10.19666/j.rlfd.202309142
Outline
收藏切换

A Python model was established for thermal performance of the heavy-duty gas-steam combined cycle triple-pressure heat recovery steam generator. The model calculates the detailed heat recovery steam generator parameters under the condition of changing unit load, including main steam pressure and flow rate, heat and heat transfer coefficient of each heat exchanger, as well as power output and efficiency. As the effect of exhaust gas temperature and flow rate on the heat recovery steam generator is analyzed, how the ambient temperature, humidity and fuel heating affect the heat recovery steam generator output is also discussed when the unit is in part-load. It is verified that the model has good simulation accuracy and calculation efficiency. Simulations for one certain frame gas turbine combined cycle show that: When the unit load is reduced from full load 650 MW to partial load 250 MW, the triple main steam pressure and feed water flow rate of heat recovery steam generator decrease, the steam turbine power output decreases from 219.1 MW to 130.4 MW, and the efficiency of heat recovery steam generator increases from 89.3% to 92.1%; main-steam flow increases as the flue gas flow rate and temperature increase at the inlet of heat recovery steam generator; As the load of the random group decreases, the heat transfer coefficient and heat transfer amount of each heat exchange surface of the waste heat boiler decreases, but the proportion of heat exchanger between the flue gas and the high-temperature section heat exchanger in the total heat increases, and the heat transfer between the flue gas and the low-temperature section increases. The proportion of heat exchanger heat transfer in the total heat is reduced; when the unit load is reduced from 650 MW to 300 MW, the proportion of steam turbine shaft power increases by 1.67 percentage points, the proportion of heat loss in the chimney flue gas decreases by 2.63 percentage points.

heavy-duty combined cycle unit  /  heat recovery steam generator  /  off-design modeling  /  variable load operation  /  deep peak-shaving
Yifeng WANG, Chunhua ZHAI, Qing HUANG, Chenhui NIU, Xinmin SU, Daoshun JIAO, Henan PAN, Qianyuan WANG, Wei SUN, Junfeng XIAO, Mengqi HU, Lin XIA, Jun LI. Off-design modeling of heat recovery steam generator in heavy-duty gas turbine combined cycle unit and variable load operation research[J]. Thermal Power Generation, 2023 , 52 (12) : 79 -89 . DOI: 10.19666/j.rlfd.202309142
  • Science and Technology Project of Huaneng Power International Inc.(HNKJ20-H42)
Year 2023 volume 52 Issue 12
PDF
156
71
Cite this Article
BibTeX
Article Info
doi: 10.19666/j.rlfd.202309142
  • Receive Date:2023-09-01
  • Online Date:2026-01-26
  • Published:2023-12-25
Article Data
Affiliations
History
  • Received:2023-09-01
Funding
Science and Technology Project of Huaneng Power International Inc.(HNKJ20-H42)
Affiliations
    1.Xi’an Thermal Power Research Institute Co., Ltd., Xi’an 710054, China
    2.School of Energy and Power Engineering, Xi’an Jiaotong University, Xi’an 710049, China
    3.Huaneng Nanjing Gas Turbine Power Plant Co., Ltd., Nanjing 210034, China
    4.Huanneng Jiangsu Energy Development Co., Ltd., Nanjing 210015, China
References
Share
https://castjournals.cast.org.cn/joweb/rlfd/EN/10.19666/j.rlfd.202309142
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT