收藏切换
Reason analysis on typical failures of low-pressure second last stage moving blades of large scale steam turbine before and after optimization
收藏切换
PDF
Yonghai ZHANG1, Weiwei GU1, Chunyan WANG1, Tingshan MA1, Wenping JU1, 2, Xueyan ZHANG1, Jingbo MA3, Jun YANG4, Zhigang SHI1
Thermal Power Generation | 2023, 52(1) : 158 - 164
Less
收藏切换
Thermal Power Generation | 2023, 52(1): 158-164
Power generation technology forum
Reason analysis on typical failures of low-pressure second last stage moving blades of large scale steam turbine before and after optimization
Full
Yonghai ZHANG1, Weiwei GU1, Chunyan WANG1, Tingshan MA1, Wenping JU1, 2, Xueyan ZHANG1, Jingbo MA3, Jun YANG4, Zhigang SHI1
Affiliations
  • 1.Xi'an Thermal Power Research Institute Co., Ltd., Xi'an 710054, China
  • 2.Xi'an TPRI Energy Conservation Technology Co., Ltd., Xi'an 710054, China
  • 3.Huaneng Yimin Coal & Electricity Co., Ltd., Power Plant, Hulunbuir 021130, China
  • 4.Datang Yangling Thermal Power Co., Ltd.,Yangling 712100, China
Published: 2023-01-25 doi: 10.19666/j.rlfd.202207178
Outline
收藏切换

Blade fractures and cracks occurred on low pressure second last stage moving blade of a steam turbine before and after the blade optimization. In order to find out the cause of this type blade failures and prevent subsequent reoccurrence, the blade failure, operating parameters and historical records were checked, and the materials and fractures of some failed blades were analyzed through physical and chemical inspection. Moreover, the centrifugal stress of the blade and the vibration characteristics of the gear train before and after optimization were numerically analyzed by finite element method. The results show that, the blade fracture is a high peripheral fatigue fracture. Before optimization, the main reason for cracks and fractures at the connection transition between the top of the inner cambered surface and the shroud on the steam outlet side of the blade is that the blade has a large torsional recovery under working conditions, resulting in severe compression of the shroud, and stress concentration and fatigue damage occur at the connection transition between the top of the inner cambered surface and the shroud on the steam outlet side. The unreasonable design of blade root structure is the main factor for high cycle fatigue cracking of blade root, while the vibration of the sixth pitch diameter of the first stage of blade impeller system falling into the "3-coincide point" resonance area is the secondary factor for blade failure. After optimization, the main reason for the fracture is the unreasonable design of the blade root structure, and the vibration of the eleventh pitch diameter of the second stage of the blade impeller system falling into the "3-point" resonance area is the secondary factor causing the blade root failure.

steam turbine  /  moving blade  /  crack  /  centrifugal stress  /  fatigue
Yonghai ZHANG, Weiwei GU, Chunyan WANG, Tingshan MA, Wenping JU, Xueyan ZHANG, Jingbo MA, Jun YANG, Zhigang SHI. Reason analysis on typical failures of low-pressure second last stage moving blades of large scale steam turbine before and after optimization[J]. Thermal Power Generation, 2023 , 52 (1) : 158 -164 . DOI: 10.19666/j.rlfd.202207178
  • Science and Technology Project of China Huaneng Group Co., Ltd.(HNKJ21-H66)
  • Science and Technology Project of Xi'an TPRI Energy Conservation Technology Co., Ltd.(GB-22-TZK15)
Year 2023 volume 52 Issue 1
PDF
60
7
Cite this Article
BibTeX
Article Info
doi: 10.19666/j.rlfd.202207178
  • Receive Date:2022-07-06
  • Online Date:2026-01-23
  • Published:2023-01-25
Article Data
Affiliations
History
  • Received:2022-07-06
Funding
Science and Technology Project of China Huaneng Group Co., Ltd.(HNKJ21-H66)
Science and Technology Project of Xi'an TPRI Energy Conservation Technology Co., Ltd.(GB-22-TZK15)
Affiliations
    1.Xi'an Thermal Power Research Institute Co., Ltd., Xi'an 710054, China
    2.Xi'an TPRI Energy Conservation Technology Co., Ltd., Xi'an 710054, China
    3.Huaneng Yimin Coal & Electricity Co., Ltd., Power Plant, Hulunbuir 021130, China
    4.Datang Yangling Thermal Power Co., Ltd.,Yangling 712100, China
References
Share
https://castjournals.cast.org.cn/joweb/rlfd/EN/10.19666/j.rlfd.202207178
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT