收藏切换
Calibration test method for inlet air volume of medium speed coal mill under hot conditions based on powder tube dynamic pressure and coal powder distribution
收藏切换
PDF
Jizhuang XU1, Zhigang SHEN1, Yafang SHEN1, Yang WANG2, Shengzhong PAN1, Mo CHEN1, Junwei ZHANG1
Thermal Power Generation | 2024, 53(5) : 75 - 81
Less
收藏切换
Thermal Power Generation | 2024, 53(5): 75-81
Thermal energy science research
Calibration test method for inlet air volume of medium speed coal mill under hot conditions based on powder tube dynamic pressure and coal powder distribution
Full
Jizhuang XU1, Zhigang SHEN1, Yafang SHEN1, Yang WANG2, Shengzhong PAN1, Mo CHEN1, Junwei ZHANG1
Affiliations
  • 1.Xiamen Huaxia International Power Development Co., Ltd., Xiamen 350200, China
  • 2.Xi’an Thermal Power Research Institute Co., Ltd., Xi’an 710054, China
Published: 2024-05-25 doi: 10.19666/j.rlfd.202401006
Outline
收藏切换

Due to the characteristics of the medium transported by medium speed coal mill and the limitations of the inlet pipeline and space, the testing method under cold pure air conditions cannot guarantee the timeliness of the calibration test for the inlet air volume. Under hot conditions, the outlet pipeline of the coal mill was selected as test object for its stable flow field. The dynamic pressure and pulverized coal distribution characteristics of each powder pipe were tested by the equal cross-section grid method. The flow velocity of the air-powder mixture was obtained by the cyclic iterative method. Finally, the inlet air volume of the coal mill was compared and calibrated by the difference between the measured air-powder mixture flow rate, the coal quantity and the design sealing air volume. The practical results show that, on the basis of the same measured original data, the inlet flow rate obtained by the method above is closer to the real value, the accuracy can be improved by about 15 percentage points compared with the calculation results with cold conditions method. This method is simple to test and practical, which can effectively improve the timeliness and accuracy of the inlet air volume calibration results of medium-speed coal mill under hot conditions, and at the same time, it also has a certain guiding role in test of the flow rate of powder-containing gas in similar industrial environments.

medium-speed coal mill  /  air-powder mixture  /  primary air volume  /  power station boilers
Jizhuang XU, Zhigang SHEN, Yafang SHEN, Yang WANG, Shengzhong PAN, Mo CHEN, Junwei ZHANG. Calibration test method for inlet air volume of medium speed coal mill under hot conditions based on powder tube dynamic pressure and coal powder distribution[J]. Thermal Power Generation, 2024 , 53 (5) : 75 -81 . DOI: 10.19666/j.rlfd.202401006
  • Science and Technology Project of State Power Investment Corporation Limited(2023-KJ-005)
Year 2024 volume 53 Issue 5
PDF
101
48
Cite this Article
BibTeX
Article Info
doi: 10.19666/j.rlfd.202401006
  • Receive Date:2024-01-10
  • Online Date:2026-01-07
  • Published:2024-05-25
Article Data
Affiliations
History
  • Received:2024-01-10
Funding
Science and Technology Project of State Power Investment Corporation Limited(2023-KJ-005)
Affiliations
    1.Xiamen Huaxia International Power Development Co., Ltd., Xiamen 350200, China
    2.Xi’an Thermal Power Research Institute Co., Ltd., Xi’an 710054, China
References
Share
https://castjournals.cast.org.cn/joweb/rlfd/EN/10.19666/j.rlfd.202401006
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT