收藏切换
Influence of Floating Offshore Wind Power Suction Anchor Size on Horizontal Bearing Characteristics
收藏切换
PDF
Quan-zhi ZHOU1, Xiao-xu FAN2, Lin HUANG3, Hong-you LI1, Pu-yang ZHANG4, Wei LIU1
Science Technology and Engineering | 2025, 25(21) : 8905 - 8913
Less
收藏切换
Science Technology and Engineering | 2025, 25(21): 8905-8913
Papers·Energy and Power Engineering
Influence of Floating Offshore Wind Power Suction Anchor Size on Horizontal Bearing Characteristics
Full
Quan-zhi ZHOU1, Xiao-xu FAN2, Lin HUANG3, Hong-you LI1, Pu-yang ZHANG4, Wei LIU1
Affiliations
  • 1 Longyuan (Beijing) New Energy Engineering Design & Research Institute Co., Ltd., Beijing 100034, China
  • 2 China Longyuan Power Group Corporation Limited, Beijing 100034, China
  • 3 Fujian Longyuan Offshore Wind Power Corporation Limited, Putian 351174, China
  • 4 School of Civil Engineering and Architecture, Tianjin University, Tianjin 300350, China
Published: 2025-07-28 doi: 10.12404/j.issn.1671-1815.2406658
Outline
收藏切换

In order to study the influence of floating offshore wind power suction anchor size on the horizontal bearing capacity, based on the ABAQUS finite element software, a three-dimensional finite element model of suction anchor foundation was established by using elastic-plastic constitutive model. The results show that the increase of diameter and height can improve the horizontal bearing capacity of suction anchor, and the increase of height is more obvious. With the change of diameter and height, the position of the mooring point also needs to be adjusted accordingly. When the ratio of suction anchor diameter to height D/H>1, the position of the mooring point needs to be increased correspondingly to make it move in translation. The change of diameter will affect the pressure change of the anchor wall, while the height has little effect on the pressure change of anchor wall. The research results are used in global first offshore floating wind power + aquaculture platform “Guoneng Gongxiang Hao” and can provide a reference for relevant project design.

offshore wind power  /  floating platform  /  suction anchor foundation  /  horizontal bearing capacity
Quan-zhi ZHOU, Xiao-xu FAN, Lin HUANG, Hong-you LI, Pu-yang ZHANG, Wei LIU. Influence of Floating Offshore Wind Power Suction Anchor Size on Horizontal Bearing Characteristics[J]. Science Technology and Engineering, 2025 , 25 (21) : 8905 -8913 . DOI: 10.12404/j.issn.1671-1815.2406658
Year 2025 volume 25 Issue 21
PDF
193
86
Cite this Article
BibTeX
Article Info
doi: 10.12404/j.issn.1671-1815.2406658
  • Receive Date:2024-09-04
  • Online Date:2026-01-13
  • Published:2025-07-28
Article Data
Affiliations
History
  • Received:2024-09-04
  • Revised:2025-04-15
Funding
Affiliations
    1 Longyuan (Beijing) New Energy Engineering Design & Research Institute Co., Ltd., Beijing 100034, China
    2 China Longyuan Power Group Corporation Limited, Beijing 100034, China
    3 Fujian Longyuan Offshore Wind Power Corporation Limited, Putian 351174, China
    4 School of Civil Engineering and Architecture, Tianjin University, Tianjin 300350, China
References
Share
https://castjournals.cast.org.cn/joweb/kxjsygc/EN/10.12404/j.issn.1671-1815.2406658
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT