Latest ArticlesThe composite polymer solid electrolytes (CPE) were prepared by a solution-casting and hot-pressing method. Na-β-Al2O3 and g-C3N4 particles were incorporated into a polyoxyethylene and polycaprolactone blended polymer electrolyte to obtain the CPE. The microstructures, chemical and electrochemical properties of the composite electrolytes were investigated. The composite electrolyte with a high conductivity at room temperature, a high voltage stability, and a dendrite suppression capability is obtained via optimizing the mass ratio of each component, especially g-C3N4. At 50 ℃, the symmetric cells with metallic Na electrodes exhibit a good long-term cycling stability at a current density of 0.1 mA/cm2. The all-solid-state cells with Na3V2(PO4)3@C positive electrode and Na/C composite negative electrode maintain a specific capacity of about 107 mA·h/g at 0.2 C.
To improve the low-temperature oxidation resistance of MoSi2, a core-shell structured MoSi2@SiO2 was prepared by a direct preoxidation method, and the preoxidation conditions, as well as the structure and the low-temperature oxidation resistance of MoSi2@SiO2 composite, were investigated. Results show that the core-shell structured MoSi2@SiO2 can be obtained under preoxidation at 800 ℃ for 1 h. The obtained SiO2 shell is amorphous which is formed due to the non-selective oxidation of MoSi2 and the evaporation of the oxidation product MoO3. The oxidation mass gain rate of MoSi2@SiO2 is <1.6% after isothermal cyclic oxidation at 400-700 ℃ for 12 h.
No. 86 Xueyuan South Road, Haidian District, Beijing
010-62662699(Operation and Technical Support)
qkjq@cast.org.cn
Copyright © 2025 China Association for Science and Technology. All rights reserved. For all open access content, the relevant licensing terms apply.
Sponsored by the Office of the Leading Group for Cybersecurity and Informatization of CAST, and supported by Science and Technology Review Publishing House
