Latest ArticlesThe Yangtze Block was a crucial component of the Gondwana supercontinent. During the Ediacaran–Early Cambrian, its western margin underwent a marked transition from carbonate- to siliciclastic-dominated depositional environments. However, the tectonic dynamics and geotectonic setting governing this pronounced sedimentary facies shift remain poorly constrained. Thick Lower Cambrian terrigenous clastic rocks widely exposed along the western margin of the Yangtze Block (Western Yangtze) serve as a key archive for tracing sediment provenance and deciphering Early Cambrian geotectonic evolution.
This study presents systematic detrital zircon U–Pb geochronological and whole-rock major- and trace-element geochemical analyses of the Lower Cambrian Qiongzhusi Formation in the Western Yangtze to constrain its provenance and tectonic background.
Whole-rock geochemical data indicate that high-field-strength elements (HFSEs) and large-ion lithophile elements (LILEs; e.g., Th, Zr, Hf, Ba, Pb) in the Qiongzhusi Formation clastic rocks align closely with upper continental crust (UCC) values. Conversely, elements such as Co, Ni, Y, Nb, Cs, Hf, and Ta are depleted relative to UCC, with Co, Cs, and Ta showing the most significant depletion. Characteristics of immobile elements (Th, Sc, Hf, Zr, Ho) and rare earth elements (REEs; e.g., La, Ce, Yb) consistently indicate a predominantly felsic igneous source. Detrital zircon U–Pb age spectra exhibit two primary population peaks at ca. 590–500 Ma and ca. 880–720 Ma, alongside two subordinate clusters at ca. 1900–1500 Ma and ca. 2500–2400 Ma.
Integrated with regional geological evidence, we propose that the Early Cambrian detritus was primarily derived from Ediacaran–Early Cambrian magmatic rocks within the Longmenshan tectonic belt, as well as weathering products of late Neoproterozoic felsic magmatic rocks from the Panxi–Hannan and Ailaoshan magmatic arcs. Subduction of the Proto-Tethys Ocean beneath the Western Yangtze during the latest Ediacaran–Early Cambrian established a Late Ediacaran–Early Cambrian magmatic arc. This tectonic event converted the Western Yangtze from a passive margin into an active continental margin, supplying voluminous Early Cambrian detritus that drove the major depositional transition from carbonates to siliciclastics. [Significance]These findings establish key provenance links between the Western Yangtze and surrounding orogenic belts, providing critical constraints for reconstructing the tectonic and paleogeographic evolution of the South China Block during the Ediacaran–Early Cambrian transition.
The dolomite in the Ordovician Kelimoli Formation of the complex tectonic zone along the western Ordos Basin margin is a high-quality reservoir for natural gas exploration. However, its genetic mechanism and the relationships among the sedimentary environment, multi-stage tectonic superimposition, and diagenetic alteration remain controversial, limiting effective guidance for oil and gas exploration.
To elucidate the genesis of this dolomite, a comprehensive analytical approach was applied, incorporating thin-section petrography, cathodoluminescence (CL), C–O isotopes, X-ray diffraction (XRD) ordering degrees, trace and rare earth element (REE) geochemistry, and Sr isotopes, integrated with regional tectonic evolution.
Under CL, the dolomites generally exhibit weak dark-brown luminescence with distinct zonation, alongside authigenic quartz and saddle dolomite, indicating hydrothermal involvement and multi-stage recrystallization during deep burial. Carbon and oxygen isotopic signatures further support a burial origin. XRD data reveal a relatively low ordering degree in dolomites, which decreases with increasing temperature, suggesting rapid crystallization under elevated temperatures. REE patterns display positive Ce and Eu anomalies, indicating that dolomitization occurred in a relatively closed, high-temperature, and high-pressure diagenetic system via internal fluid readjustment and material redistribution. Overall, the dolomite shows a relatively low degree of order, and the order decreases with higher temperatures, suggesting that the dolomite formed in an environment with relatively high temperature and rapid crystallization rate. Geochemically, lower Sr contents correlate with higher Fe and Mn concentrations, reflecting multi-stage superimposed alteration under deep burial conditions. Furthermore, strontium isotope values of medium-to coarse-grained dolomite closely approach average crustal values, likely influenced by crustal Sr transported along coeval tectonic conduits.
This research attributes the dolomite formation primarily to deep burial and the coeval superimposition of tectonic fluid modification. The origin and evolution of the Ordovician Kelimoli Formation dolomite were strongly controlled by deep fault systems. During the co-deposition period, this fault system controlled the development of high-energy terraces. In the subsequent tectonic activity phase, the deep fault system became a fluid migration channel, facilitating the superimposed modification of dolomite bodies.
The research results provide fundamental support for the efficient exploration of oil and gas resources.
Columnar joints in basalt are typical structures formed during magmatic cooling and contraction. However, their formation mechanisms, internal structural characteristics, and cooling histories remain debated. This study aims to constrain the internal structures and cooling histories of large-diameter basalt columns through integrated rock magnetic and paleomagnetic analyses.
Detailed rock magnetic and paleomagnetic analyses were conducted on 49 oriented samples collected from two Pliocene basalt columns, each reaching up to 1.5 m in diameter, in the Bo Phloi section, Kanchanaburi, Thailand. Rock magnetic experiments included hysteresis-loop measurements, isothermal remanent magnetization (IRM) acquisition, first-order reversal curve (FORC) analysis, anisotropy of magnetic susceptibility (AMS) measurements, and temperature-dependent magnetic susceptibility measurements. Stepwise thermal demagnetization was performed to isolate stable components of remanent magnetization.
Hysteresis loops and IRM acquisition curves indicate that the magnetic assemblage is dominated by pseudo-single-domain (PSD) titanomagnetite grains, with magnetic saturation reached at fields below approximately 300 mT. The two-stage increase in IRM acquisition with increasing field suggests contributions from magnetic components with different coercivities. FORC diagrams further support the predominance of PSD magnetic grains and reveal systematic differences between the margins and interiors of the basalt columns. For both basalt columns, AMS results show sub-vertical minimum susceptibility axes (K3) and sub-horizontal maximum (K1) and intermediate (K2) axes, with generally low degrees of magnetic anisotropy (Pj < 1.05). These AMS fabrics indicate a primary near-horizontal magma-flow fabric during emplacement, but provide no evidence for vertical melt migration or internal convection. AMS parameters also reveal systematic spatial variations. Samples from the column margins exhibit lower magnetic susceptibilities (χ), lineation (L), and anisotropy degree (Pj) values and are predominantly characterized by oblate fabrics (T > 0), whereas interior samples show higher χ, L, and Pj values and predominantly prolate fabrics (T < 0). These differences reflect contrasting cooling conditions between the margins and interiors of the basalt columns. The margins cooled more rapidly, leaving less time for magnetic minerals to crystallize, grow, and develop preferred orientations. In contrast, the interiors cooled more slowly and likely remained at elevated temperatures in a plastic or partially molten state for longer periods, allowing magnetic minerals to crystallize, become concentrated, and develop preferred orientations under thermal contraction stresses. Paleomagnetic results indicate that stepwise thermal demagnetization isolates a stable, single-component remanent magnetization carried by PSD titanomagnetite. Six marginal samples from basalt column A exhibit relatively scattered virtual geomagnetic pole (VGP) distributions and anomalous directions, whereas the remaining 43 samples show relatively clustered VGPs after tilt correction. Systematic variations in remanent magnetization directions and VGPs indicate that cooling did not proceed symmetrically or uniformly from the column margins toward the cores. Instead, the columns appear to have undergone an asymmetric, unidirectional regional cooling process, possibly influenced by a localized heat source.
Integrated rock magnetic and paleomagnetic analyses lead to the following conclusions: (1) The basalt columns in Kanchanaburi are dominated by PSD titanomagnetite. Their AMS fabrics, characterized by subvertical K3 axes and subhorizontal K1 and K2 axes, record a primary near-horizontal magma flow during emplacement. (2) The column margins cooled more rapidly, resulting in finer magnetic grains, lower magnetic anisotropy, and predominantly oblate fabrics, whereas the interiors cooled more slowly, allowing magnetic minerals to crystallize, grow, and develop stronger preferred orientations, resulting in higher anisotropy and predominantly prolate fabrics. (3) Systematic variations in paleomagnetic directions and VGPs among the 49 samples indicate that post-jointing cooling was neither uniform nor symmetric but instead proceeded asymmetrically and unidirectionally across the basalt columns.
These findings contribute to a better understanding of the cooling processes of basaltic lava and provide new insights into long-term variations in the geomagnetic field.
Coseismic surface ruptures provide key evidence for identifying the seismogenic structures of earthquakes, elucidating crustal deformation mechanisms, and assessing seismic hazards. To understand the surface deformation and disaster development characteristics associated with different types of fault activity on the Tibetan Plateau, and to reveal the current crustal deformation patterns reflected by a series of strong earthquakes in recent years, we systematically compiled and analyzed the surface rupture characteristics of five M>6.5 earthquakes that have occurred on the Tibetan Plateau and surrounding areas since 2021, based on field surveys.
We used the 2021 MW 7.4 Maduo, 2022 MW 6.6 Menyuan, 2022 MW 6.6 Luding, 2024 MW 7.0 Wushi, and 2025 MW 7.1 Dingri earthquakes as representative cases. We integrated results from remote sensing interpretation, field surveys, and UAV photogrammetry, as well as seismological and geodetic data, to conduct a detailed analysis of the surface rupture and coseismic displacement distribution characteristics of these events.
The strike-slip Maduo and Menyuan earthquakes formed coseismic surface rupture zones approximately 150~160 km and 22~31 km long, respectively, with maximum coseismic surface displacements of ~3.6 m and ~3.7 m. Contrastingly, the Luding earthquake, also a strike-slip event, exhibited a surface rupture only ~450 m long at Ertaizi. The strong, MW 5.7 aftershock of the thrust-type Wushi earthquake generated a coseismic surface rupture zone ~5 km long with a maximum vertical displacement of ~1.7 m, while the normal-fault-type Dingri earthquake formed a coseismic surface rupture zone 25~36.5 km long with a maximum vertical displacement of ~2.7 m.
A comprehensive analysis of the spatiotemporal distribution characteristics of major regional earthquakes indicates that, prior to the 2022 Luding earthquake, major earthquakes on the Tibetan Plateau were primarily clustered around the periphery of the active Bayan Har block. The subsequent Wushi and Dingri earthquakes both occurred far from the Bayan Har block, suggesting that the clustering period of major earthquakes in this active block may have ended. Further analysis of focal mechanism solutions indicates that strike-slip earthquakes have dominated recent moderate-to-strong seismic events on the Tibetan Plateau and its periphery. This may be related to the fact that current crustal deformation on the Tibetan Plateau is primarily regulated and absorbed through the lateral extrusion of active blocks along large strike-slip fault zones.
The above research findings provide fundamental data and references for earthquake early warning, disaster prevention and mitigation, as well as the planning, construction, and seismic design of major regional engineering projects in the Tibetan Plateau region.
The coseismic surface rupture formed by an earthquake is the most obvious geomorphological evidence of fault activity. Its spatial distribution and deformation characteristics record essential information about seismic ruptures and fault motion. This information not only aids in understanding the earthquake rupture process and seismogenic mechanism but also contributes significantly to a deeper comprehension of fault evolution and crustal deformation. Therefore, it is of great importance to promptly investigate coseismic surface rupture zones and acquire high-precision geomorphological data.
The November 18, 1951 M 8.0 Beng Co earthquake in central Tibet ruptured the Beng Co fault and produced a well-preserved surface rupture zone. We obtained high-precision images by integrating field investigations with high-resolution orthomosaic images and digital elevation models (DEMs) derived from unmanned aerial vehicle (UAV) imagery based on the Structure from Motion (SfM) method. We measured both coseismic and cumulative displacements along the rupture zone to examine the kinematic characteristics of the Beng Co fault and the seismogenic background of the Beng Co earthquake. [Results and Conclusions] The earthquake ruptured the eastern segment of the Beng Co fault, forming an approximately 90-km-long coseismic surface rupture zone with an overall strike of 120°. A series of right-lateral offset gullies/terraces, push-ups, and pull-aparts along the rupture zone reveals that the Beng Co fault is an active right-lateral strike-slip fault. Cumulative offset probability distribution (COPD) analysis suggests that large earthquakes have occurred repeatedly along this fault and have been fairly regular in terms of slip accumulation, with a typical lateral slip of ~4.0 m. The Beng Co earthquake occurred as a direct response to the fault's accommodation of regional extrusion deformation caused by the rapid eastward movement of the eastern Qiangtang block. [Significance]This work not only facilitates the timely preservation of high-resolution 3D data of the coseismic surface rupture associated with the Beng Co earthquake but also provides a basis for studying tectonic deformation and assessing seismic hazards in central Tibet.
On 21 May 2021, an MS 6.4 earthquake struck Yangbi County, Dali Prefecture, Yunnan Province — the largest event near the Weishan Basin segment of the Weixi–Qiaohou fault since 1976. The mainshock produced no surface rupture and did not occur on any known active fault. Despite numerous previous studies, the precise seismogenic structure and causative faults of this typical foreshock–mainshock–aftershock sequence (including seven MS ≥ 4.0 foreshocks and 22 MS ≥ 4.0 aftershocks) remain controversial; some results are poorly constrained or even mutually contradictory. Furthermore, the occurrence of moderate-to-strong earthquakes surrounding the source area has increased significantly in recent years. This study thus aims to elucidate the rupture behaviour and seismogenic environment of the entire earthquake sequence.
Using pre-existing focal mechanism solutions of minor earthquakes as reference events, we adopted the relative centroid relocation method and time–frequency source characterisation method to calculate rupture directivity parameters for ten MS ≥ 4.0 events. In addition, we calculated the radiation efficiency for all MS ≥ 3.0 earthquakes based on waveform recording from local seismic station.
Our results demonstrate distinct along-strike segmentation of rupture directivity across the Yangbi sequence. On the northwestern segment of the sequence, five earthquakes feature NW-striking fault planes. On the southeastern segment, four earthquakes exhibit faults either NW or NE. The largest foreshock (MS 5.6) and the largest aftershock (MS 5.2) both rupture toward the NE, indicating that they did not occur on the same fault as the MS 6.4 mainshock. Combined with previous relocation and geodetic results, we interpret that these two events occurred on conjugate faults. The MS 6.4 mainshock ruptured toward the NW, consistent with the dominant rupture azimuth of the NW segment, suggesting that the mainshock primarily ruptured the NW-trending master fault, whereas conjugate faulting in the SE segment constitutes an important component of the entire sequence. For the MS 4.4 foreshock, the relative centroid method yields a rupture direction toward the NW, while the time–frequency source method gives a direction toward the SE. This event is therefore interpreted as a frequency-dependent bilateral rupture. We further calculated and corrected the radiation efficiency values for all MS≥ 3.0 events. The efficiency results show a similar along-strike segmentation: the radiation efficiency differs systematically between the NW and SE segments. Integrating rupture directivity patterns, radiation efficiency measurements and regional geological constraints, we infer that the segmentation in rupture directivity is primarily caused by differences in fault frictional properties between the NW and SE segments.
The Yangbi earthquake sequence exhibits distinct segmentation in rupture directivity, with the NW segment dominated by NW-striking master fault rupture and the SE segment characterized by conjugate faulting. The MS 4.4 foreshock corresponds to a frequency-dependent bilateral rupture event. The segmentation in radiation efficiency further supports the interpretation of different fault frictional regimes along the fault strike. [Significance] These findings deliver new constraints on the source characteristics and seismogenic structure of the Yangbi earthquake sequence. They improve our knowledge of the regional tectonic setting and earthquake nucleation cycle, and offer valuable seismological evidence for future seismic hazard assessment across the study area.
Accurate constraints on coseismic surface displacement are essential for revealing earthquake rupture processes, assessing regional seismic hazards, and understanding the partitioning of near-surface deformation. Conventional near-field displacement measurements generally capture only localized deformation along visible rupture zones, potentially underestimating total coseismic displacement by not considering off-fault deformation. Long linear anthropogenic markers crossing rupture zones, such as pasture fences, provide a larger measurement aperture and enable us to quantify total coseismic displacement and evaluate the contribution of off-fault deformation. The 8 January 2022 MW 6.6 Menyuan earthquake along the Haiyuan fault zone displaced multiple pasture fences across the well-preserved surface ruptures, providing an ideal opportunity to investigate total displacement and off-fault deformation.
In this study, we utilized unmanned aerial vehicle (UAV) photogrammetry to acquire high-resolution aerial images along the entire surface rupture zone of the 2022 Menyuan earthquake and to generate digital orthophoto maps (DOMs) and digital elevation models (DEMs) with spatial resolutions of 2–6 cm. Combined with detailed field investigations, we mapped the coseismic surface rupture at a fine scale and selected 12 groups of long, linear pasture fences crossing the rupture zone to conduct multi-aperture displacement measurements.
The coseismic surface rupture extends for approximately 28 km and consists of two main branches: the southern branch along the Tuolaishan fault and the northern branch along the Lenglongling fault. The rupture zone was divided into four segments from west to east, namely S1 to S4, based on the geometric distribution and structural characteristics of the rupture traces, mainly NE-trending, right-stepping en echelon tensional-shear cracks, oblique compressional bulges, and mole-track-like deformation. The width of the surface rupture zone varies significantly along strike, reaching a maximum of approximately 160 m in the S3 segment. Except for the relatively wide S3, most rupture sections are mainly concentrated within a narrow width range of 10–30 m, indicating strong control by local fault geometry and rupture branching. Multi-aperture measurements using 12 groups of cross-fault pasture fences reveal that visible displacement within the mapped rupture zone ranges from 0 to 2.8 m, whereas the total coseismic displacement measured across the larger aperture of the fences ranges from 1.2 to 4.1 m. The corresponding proportion of off-fault deformation reaches 27%–76%, indicating that a substantial part of the coseismic deformation was accommodated outside the visible principal rupture traces. The maximum total coseismic displacement, approximately 4.1 ± 0.8 m, occurs in the S3 segment of the Lenglongling Fault near the epicenter, where the mean proportion of off-fault deformation is relatively low at approximately 33%. From S3 to S1 along the Tuolaishan branch westward, the total coseismic displacement gradually decreases to a mean of 1.7 ± 0.5 m, while the mean proportion of off-fault deformation increases significantly to about 55%, showing that deformation became progressively less localized and more widely distributed across the surrounding near-surface materials.
Compared with previous near-field measurements, the total coseismic displacements obtained in this study are generally larger. This discrepancy is mainly attributed to the larger measurement aperture provided by the long cross-fault fences, which enabled the capture of a more complete deformation field, including both localized displacement on the visible rupture and distributed off-fault deformation. The 2022 Menyuan earthquake produced a complex surface rupture system composed of the Tuolaishan and Lenglongling fault branches, with clear along-strike variations in rupture geometry, rupture-zone width, and displacement distribution. Multi-aperture measurements using long pasture fences indicate that off-fault deformation accounted for a considerable proportion of the total coseismic displacement, especially in the western branch rupture where deformation was more distributed. The comparison with previous near-field measurements demonstrates that relying only on localized rupture offsets may underestimate the total coseismic displacement. [Significance] This study highlights the critical importance of incorporating off-fault deformation into coseismic displacement measurements to prevent underestimating seismic slip in hazard assessments. Furthermore, it demonstrates that using long, linear, anthropogenic markers via high-resolution UAV photogrammetry is an effective, innovative approach for capturing complete near-surface deformation fields along complex strike-slip fault systems.
In liquefaction-susceptible geological settings, the spatial superimposition of earthquake-induced liquefaction and coseismic fault rupture renders the genetic attribution of surface deformation highly ambiguous, yet systematic field diagnostic criteria and a unified geomechanical framework remain elusive.
Integrating field emergency surveys, high-resolution remote sensing image interpretation, unmanned aerial vehicle (UAV) photogrammetry, and borehole–trench investigations with regional geological and hydrogeological context, this study systematically characterizes the spatial distribution and controlling mechanisms of large-scale surface deformation triggered by the 7 January 2025 MS 6.8 Dingri, Tibet earthquake.
Our results show that the extensive surface deformation along the eastern shore of Dengmecuo Lake to the Pengqu River is dominated by liquefaction-induced lateral spreading rather than coseismic tectonic surface rupture; small-scale coseismic surface ruptures occur locally along the eastern lake shore; and north of Nixiacuo, coseismic surface rupture predominates, with superimposed liquefaction deformation. The spatial extent of liquefaction-induced lateral spreading is governed by two topographic configurations: free-face conditions in river valleys, and gently sloping ground on low-gradient alluvial–lacustrine plains. Earthquake-induced liquefaction substantially reduces the shear strength of water-saturated sandy sediments and, driven by the combined effects of seismic inertia and gravity, triggers lateral spreading that generates lateral compressive forces and horizontal displacement. At the trailing edge of the deformation zone, tensional ground cracks and graben-like subsidence develop, whereas the leading edge is characterized by pressure ridges and shallow thrust structures formed by lateral compression. Tensile fissures generated by lateral spreading further provide conduits for the upward injection of liquefied sand from depth, giving rise to abundant sand volcanoes. The systematic coexistence of trailing-edge extension, leading-edge compression, and sand volcanoes constitutes a diagnostic deformation assemblage of liquefaction-induced lateral spreading, which is fundamentally distinct in geometry and kinematics from tectonic coseismic surface ruptures. The development of liquefaction deformation is jointly controlled by seismic intensity, micro-topography, the spatial distribution of liquefiable sand layers, and the depth of the shallow groundwater table. Importantly, lateral spreading can impose additional displacement onto active fault zones, and compressional liquefaction deformation may overprint fault traces, systematically biasing the identification of the geometry and kinematics of coseismic surface ruptures. Accordingly, we propose three field criteria for identifying liquefaction-induced deformation: (1) macroscopic plastic flow or fluid-like deformation features; (2) highly consistent deformation patterns along watercourses across both fault and non-fault zones under comparable depositional conditions; and (3) systematic spatial association with liquefaction indicators such as sand volcanoes.
We conclude that the large-scale deformation triggered by the 2025 Dingri earthquake should not be classified as coseismic surface rupture; rather, trailing-edge extension, leading-edge compression, and sand boils together constitute a unified lateral spreading system. Liquefaction-induced deformation exerts a pronounced overprinting effect on coseismic surface ruptures, and rigorously distinguishing the two in liquefaction-prone seismotectonic settings is essential for accurately assessing fault activity. [Significance] This study provides the first systematic mechanistic framework for liquefaction-induced large-scale deformation associated with the Dingri earthquake, and the field criteria and conceptual model established herein offer a scientific basis for seismic hazard assessment, post-earthquake reconstruction, and major engineering siting in the southern Tibetan rift system.
The Tibetan Plateau, as the world's largest and most tectonically active continental collision orogenic belt, has long been at the forefront of global geoscience research due to its complex tectonic patterns and ongoing dynamic processes. The Jiali Fault Zone along the southeastern margin of the Tibetan Plateau serves as the key structure for the southeastward extrusion of plateau materials. Its tectonic attributes, geometric distribution, and activity are of great significance for understanding the Cenozoic tectonic evolution of the plateau, the kinematics of southeastward extrusion of plateau materials, the genesis of regional earthquakes and geohazards, and the assessment of regional engineering risks. However, the precise spatial location and Holocene activity of the southeastern segment of this fault zone (from Guxiang to Gongrigabu) have long been subject to controversy due to rugged terrain and dense vegetation cover.
This study systematically investigated the spatial distribution, structural characteristics, and activity of the Jiali Fault in this critical, disputed segment by integrating multiple techniques, including high-resolution remote sensing image interpretation, field geological and geomorphological surveys, magnetotelluric sounding, and drilling data. Based on these investigations, we further analyzed the potential underground engineering effects triggered by fault activity.
(1) The southeastern segment of the Jiali Fault Zone extends continuously southeastward from south of Guxiang through Galongla and Jinzhunongba to Langqiunongba. Remote sensing interpretation reveales different kinds of structural geomorphologies including fault troughs, sag ponds, and push-up ridges. Field surveys identified bedrock fault planes and horizontal striations, demonstrating predominantly right-lateral strike-slip motion. Geophysical surveys revealed distinct low-resistivity fracture zones (approximately 200–300 m wide) in the Cuokanongba, Galongla, Jinzhunongba, and Langqiunongba areas, indicating that the Jiali Fault dips 60°–80° to the southwest. Drilling cores revealed significant fault fracture zones in the Galongla area. Together, these findings confirm the existence and NW-SE-trending distribution of the Jiali fault. In combination with evidence for Holocene activity in the western segment, offset of late Pleistocene–Holocene sedimentary profiles in the Gongrigabuqu segment, and new survey results, the southeastern segment of the Jiali Fault plausibly exhibits Holocene activity. (2) Activity along the Jiali Fault may trigger the following seven types of underground engineering effects and associated adverse geological issues: co-seismic displacement (with an estimated maximum displacement up to 5–6 meters), rock mass degradation, high stress and rockbursts, ground motion amplification, high-pressure water and mud outbursts, localized geothermal anomalies, and secondary hazards at tunnel entrances. These effects form a complex and intrinsically linked geological risk chain, posing significant challenges for deep, long tunnels crossing fault zones. Therefore, for underground projects crossing potentially active faults where avoidance is impossible or cost-prohibitive, we recommend implementing systematic reinforcement designs and risk control measures corresponding to these effects across the entire project life cycle, starting from the planning and site selection stages.
This study addressed the challenges of applying traditional active detection methods to complex geological environments, such as high topographic relief, deep vegetation cover, and the absence of fine-grained Quaternary deposits, along the southeastern margin of the Tibetan Plateau. This study focused on remote sensing interpretation, high-precision geophysical surveys, and cross-fault drilling, thereby establishing a successful model for future active fault exploration in similar regions. The outcomes not only provide critical geological constraints for refining the tectonic model of the southeastern Tibetan Plateau, but also offer an indispensable scientific basis for planning, seismic design, and risk prevention of major engineering projects crossing active fault zones. Furthermore, the research methodology establishes a successful model for future active fault investigations in comparable regions.
Segmentation studies of active tectonics are of great significance for earthquake prediction and hazard assessment. To investigate whether geomorphic indices can reflect differential activity along fault segments, this study focuses on the Kouquan Fault—a typical normal fault located at the mountain–basin transition on the western boundary of the Datong Basin—and conducts a segmentation analysis based on geomorphic indices.
Using 12.5 m-resolution ALOS-PALSAR DEM data, we extracted 55 drainage basins on the footwall of the fault and calculated various geomorphic indices, including basin slope, mountain-front sinuosity (
The geomorphic indices, primarily controlled by tectonic uplift, exhibit clear segmentation. Values in the central segment are significantly higher than those in the northern and southern segments. This spatial variation aligns with the fault's slip rate trend, indicating that geomorphic indices can effectively reflect differential fault activity. Some indices, however, are more influenced by lithology or precipitation and therefore exhibit lower sensitivity to tectonic activity.
The study demonstrates that fluvial geomorphic indices reveal the segmental activity of the Kouquan Fault and can serve as an effective tool for assessing fault segmentation. Furthermore, the geomorphic indices of the Kouquan Fault are mainly controlled by tectonic activity, among which the