收藏切换
Liquefaction-induced large-scale ground deformation triggered by the 7 January 2025 MS 6.8 Dingri earthquake: characteristics and formation mechanisms
收藏切换
Ting HUANG1, 2, Zhonghai WU1, 3, *, Shuai HAN1, 3, Zhichao LI1, 3, Fuxin FAN1, 3, Yang GAO1, Tingting TIAN1, 3, Shiming LU1, 3
Journal of Geomechanics | 2026, 32(3) : 581 - 602
Less
收藏切换
Journal of Geomechanics | 2026, 32(3): 581-602
Liquefaction-induced large-scale ground deformation triggered by the 7 January 2025 MS 6.8 Dingri earthquake: characteristics and formation mechanisms
Full
Ting HUANG1, 2, Zhonghai WU1, 3, *, Shuai HAN1, 3, Zhichao LI1, 3, Fuxin FAN1, 3, Yang GAO1, Tingting TIAN1, 3, Shiming LU1, 3
Affiliations
  • 1Institute of Geomechanics, Chinese Academy of Geological Sciences, Beijing 100081, China
  • 2School of Earth and Space Sciences, Peking University, Beijing 100871, China
  • 3Key Laboratory of Active Tectonics and Geological Safety, Ministry of Natural Resources, Beijing 100081, China
Published: 2026-06-28 doi: 10.12090/j.issn.1006-6616.2026047
Outline
收藏切换
Objective

In liquefaction-susceptible geological settings, the spatial superimposition of earthquake-induced liquefaction and coseismic fault rupture renders the genetic attribution of surface deformation highly ambiguous, yet systematic field diagnostic criteria and a unified geomechanical framework remain elusive.

Methods

Integrating field emergency surveys, high-resolution remote sensing image interpretation, unmanned aerial vehicle (UAV) photogrammetry, and borehole–trench investigations with regional geological and hydrogeological context, this study systematically characterizes the spatial distribution and controlling mechanisms of large-scale surface deformation triggered by the 7 January 2025 MS 6.8 Dingri, Tibet earthquake.

Results

Our results show that the extensive surface deformation along the eastern shore of Dengmecuo Lake to the Pengqu River is dominated by liquefaction-induced lateral spreading rather than coseismic tectonic surface rupture; small-scale coseismic surface ruptures occur locally along the eastern lake shore; and north of Nixiacuo, coseismic surface rupture predominates, with superimposed liquefaction deformation. The spatial extent of liquefaction-induced lateral spreading is governed by two topographic configurations: free-face conditions in river valleys, and gently sloping ground on low-gradient alluvial–lacustrine plains. Earthquake-induced liquefaction substantially reduces the shear strength of water-saturated sandy sediments and, driven by the combined effects of seismic inertia and gravity, triggers lateral spreading that generates lateral compressive forces and horizontal displacement. At the trailing edge of the deformation zone, tensional ground cracks and graben-like subsidence develop, whereas the leading edge is characterized by pressure ridges and shallow thrust structures formed by lateral compression. Tensile fissures generated by lateral spreading further provide conduits for the upward injection of liquefied sand from depth, giving rise to abundant sand volcanoes. The systematic coexistence of trailing-edge extension, leading-edge compression, and sand volcanoes constitutes a diagnostic deformation assemblage of liquefaction-induced lateral spreading, which is fundamentally distinct in geometry and kinematics from tectonic coseismic surface ruptures. The development of liquefaction deformation is jointly controlled by seismic intensity, micro-topography, the spatial distribution of liquefiable sand layers, and the depth of the shallow groundwater table. Importantly, lateral spreading can impose additional displacement onto active fault zones, and compressional liquefaction deformation may overprint fault traces, systematically biasing the identification of the geometry and kinematics of coseismic surface ruptures. Accordingly, we propose three field criteria for identifying liquefaction-induced deformation: (1) macroscopic plastic flow or fluid-like deformation features; (2) highly consistent deformation patterns along watercourses across both fault and non-fault zones under comparable depositional conditions; and (3) systematic spatial association with liquefaction indicators such as sand volcanoes.

Conclusions

We conclude that the large-scale deformation triggered by the 2025 Dingri earthquake should not be classified as coseismic surface rupture; rather, trailing-edge extension, leading-edge compression, and sand boils together constitute a unified lateral spreading system. Liquefaction-induced deformation exerts a pronounced overprinting effect on coseismic surface ruptures, and rigorously distinguishing the two in liquefaction-prone seismotectonic settings is essential for accurately assessing fault activity. [Significance] This study provides the first systematic mechanistic framework for liquefaction-induced large-scale deformation associated with the Dingri earthquake, and the field criteria and conceptual model established herein offer a scientific basis for seismic hazard assessment, post-earthquake reconstruction, and major engineering siting in the southern Tibetan rift system.

Dingri earthquake  /  large deformations induced by liquefaction  /  liquefaction of sand  /  deformation mechanism
黄婷, 吴中海, 韩帅, 李智超, 凡福新, 高扬, 田婷婷, 陆诗铭. 2025年1月7日定日MS 6.8地震诱发的液化大变形特征及其成因机制. 地质力学学报, 2026 , 32 (3) : 581 -602 . DOI: 10.12090/j.issn.1006-6616.2026047
Ting HUANG, Zhonghai WU, Shuai HAN, Zhichao LI, Fuxin FAN, Yang GAO, Tingting TIAN, Shiming LU. Liquefaction-induced large-scale ground deformation triggered by the 7 January 2025 MS 6.8 Dingri earthquake: characteristics and formation mechanisms[J]. Journal of Geomechanics, 2026 , 32 (3) : 581 -602 . DOI: 10.12090/j.issn.1006-6616.2026047
  • This research was financially supported by the Young Scientists Fund of the National Natural Science Foundation of China (Grant No. 42402229), the National Natural Science Foundation of China (Grant Nos. 42472287 and 42202259), and the Geological Survey Project of the China Geological Survey (Grant No. DD202601103304).
Year 2026 volume 32 Issue 3
28
14
Cite this Article
BibTeX
Article Info
doi: 10.12090/j.issn.1006-6616.2026047
  • Receive Date:2026-04-14
  • Online Date:2026-11-18
  • Published:2026-06-28
Article Data
Affiliations
History
  • Received:2026-04-14
  • Revised:2026-05-14
  • Accepted:2026-05-20
Funding
This research was financially supported by the Young Scientists Fund of the National Natural Science Foundation of China (Grant No. 42402229), the National Natural Science Foundation of China (Grant Nos. 42472287 and 42202259), and the Geological Survey Project of the China Geological Survey (Grant No. DD202601103304).
Affiliations
    1Institute of Geomechanics, Chinese Academy of Geological Sciences, Beijing 100081, China
    2School of Earth and Space Sciences, Peking University, Beijing 100871, China
    3Key Laboratory of Active Tectonics and Geological Safety, Ministry of Natural Resources, Beijing 100081, China
References
Share
https://castjournals.cast.org.cn/joweb/dzlxxb/EN/10.12090/j.issn.1006-6616.2026047
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT