收藏切换
Coseismic surface rupture and seismogenic background of the 1951 M 8.0 Beng Co earthquake in the central Tibetan Plateau
收藏切换
Fucai LIU1, 2, 3, Jiawei PAN1, 2, 3, 4, *, Haibing LI1, 2, 3, 4, Marie-Luce CHEVALIER1, 2, 3, 4, Zhiming SUN5, Chenyi JIANG1, 2, Siqi ZHANG1, 2
Journal of Geomechanics | 2026, 32(3) : 528 - 544
Less
收藏切换
Journal of Geomechanics | 2026, 32(3): 528-544
Coseismic surface rupture and seismogenic background of the 1951 M 8.0 Beng Co earthquake in the central Tibetan Plateau
Full
Fucai LIU1, 2, 3, Jiawei PAN1, 2, 3, 4, *, Haibing LI1, 2, 3, 4, Marie-Luce CHEVALIER1, 2, 3, 4, Zhiming SUN5, Chenyi JIANG1, 2, Siqi ZHANG1, 2
Affiliations
  • 1Institute of Geology, Chinese Academy of Geological Sciences, Beijing 100037, China
  • 2Key Laboratory of Continental Dynamics of Ministry of Natural Resources, Beijing 100037, China
  • 3National Field Observation and Research Station (Jiangsu Donghai) for Continental Deep Hole Crustal Activity, Lianyungang 222300, Jiangsu,China
  • 4State Key Laboratory of Deep Earth and Mineral Exploration, Beijing 100094, China
  • 5Institute of Geomechanics, Chinese Academy of Geological Sciences, Beijing 100081, China
Published: 2026-06-28 doi: 10.12090/j.issn.1006-6616.2026016
Outline
收藏切换
Objective

The coseismic surface rupture formed by an earthquake is the most obvious geomorphological evidence of fault activity. Its spatial distribution and deformation characteristics record essential information about seismic ruptures and fault motion. This information not only aids in understanding the earthquake rupture process and seismogenic mechanism but also contributes significantly to a deeper comprehension of fault evolution and crustal deformation. Therefore, it is of great importance to promptly investigate coseismic surface rupture zones and acquire high-precision geomorphological data.

Methods

The November 18, 1951 M 8.0 Beng Co earthquake in central Tibet ruptured the Beng Co fault and produced a well-preserved surface rupture zone. We obtained high-precision images by integrating field investigations with high-resolution orthomosaic images and digital elevation models (DEMs) derived from unmanned aerial vehicle (UAV) imagery based on the Structure from Motion (SfM) method. We measured both coseismic and cumulative displacements along the rupture zone to examine the kinematic characteristics of the Beng Co fault and the seismogenic background of the Beng Co earthquake. [Results and Conclusions] The earthquake ruptured the eastern segment of the Beng Co fault, forming an approximately 90-km-long coseismic surface rupture zone with an overall strike of 120°. A series of right-lateral offset gullies/terraces, push-ups, and pull-aparts along the rupture zone reveals that the Beng Co fault is an active right-lateral strike-slip fault. Cumulative offset probability distribution (COPD) analysis suggests that large earthquakes have occurred repeatedly along this fault and have been fairly regular in terms of slip accumulation, with a typical lateral slip of ~4.0 m. The Beng Co earthquake occurred as a direct response to the fault's accommodation of regional extrusion deformation caused by the rapid eastward movement of the eastern Qiangtang block. [Significance]This work not only facilitates the timely preservation of high-resolution 3D data of the coseismic surface rupture associated with the Beng Co earthquake but also provides a basis for studying tectonic deformation and assessing seismic hazards in central Tibet.

M 8.0 Beng Co earthquake  /  coseismic surface rupture  /  cumulative offset probability distribution  /  central Tibetan Plateau  /  seismogenic background
刘富财, 潘家伟, 李海兵, Marie-Luce Chevalier, 孙知明, 江晨轶, 张斯琪. 青藏高原中部1951年崩错M 8.0地震同震地表破裂和发震构造背景. 地质力学学报, 2026 , 32 (3) : 528 -544 . DOI: 10.12090/j.issn.1006-6616.2026016
Fucai LIU, Jiawei PAN, Haibing LI, Marie-Luce CHEVALIER, Zhiming SUN, Chenyi JIANG, Siqi ZHANG. Coseismic surface rupture and seismogenic background of the 1951 M 8.0 Beng Co earthquake in the central Tibetan Plateau[J]. Journal of Geomechanics, 2026 , 32 (3) : 528 -544 . DOI: 10.12090/j.issn.1006-6616.2026016
  • This research was financially supported by the Geological Survey Project of the China Geological Survey (Grant No. DD20240100703), the National Natural Science Foundation of China (Grant Nos. 42372274 and 42325207), the National Key Research & Development Program (Grant No. 2023YFC3012003), and the Second Tibetan Plateau Scientific Expedition and Research Program (STEP) of the Science and Technology of China (Grant No. 2019QZKK0901).
Year 2026 volume 32 Issue 3
31
16
Cite this Article
BibTeX
Article Info
doi: 10.12090/j.issn.1006-6616.2026016
  • Receive Date:2026-01-29
  • Online Date:2026-11-18
  • Published:2026-06-28
Article Data
Affiliations
History
  • Received:2026-01-29
  • Revised:2026-05-20
  • Accepted:2026-05-22
Funding
This research was financially supported by the Geological Survey Project of the China Geological Survey (Grant No. DD20240100703), the National Natural Science Foundation of China (Grant Nos. 42372274 and 42325207), the National Key Research & Development Program (Grant No. 2023YFC3012003), and the Second Tibetan Plateau Scientific Expedition and Research Program (STEP) of the Science and Technology of China (Grant No. 2019QZKK0901).
Affiliations
    1Institute of Geology, Chinese Academy of Geological Sciences, Beijing 100037, China
    2Key Laboratory of Continental Dynamics of Ministry of Natural Resources, Beijing 100037, China
    3National Field Observation and Research Station (Jiangsu Donghai) for Continental Deep Hole Crustal Activity, Lianyungang 222300, Jiangsu,China
    4State Key Laboratory of Deep Earth and Mineral Exploration, Beijing 100094, China
    5Institute of Geomechanics, Chinese Academy of Geological Sciences, Beijing 100081, China
References
Share
https://castjournals.cast.org.cn/joweb/dzlxxb/EN/10.12090/j.issn.1006-6616.2026016
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT