Home Latest Articles
Latest Articles
  • Journal of Chinese Society of Power Engineering. 2026, 46(2): 113-122.
    To promote the development of high-efficiency, large-scale energy storage technology and ensure the balance of supply and demand in the power grid, a low-pressure subcritical compressed carbon dioxide energy storage (CCES) system was proposed, and static and dynamic models were established to analyze the thermodynamic performance and economics during the charging and discharging processes in different operating modes of the system. Results show that the energy storage efficiency under typical operating conditions is 63.37%. The energy consumed during charging process and power generated during discharging process in the steady-state conditions are higher than those in the dynamic simulations, the energy storage efficiency of the system in different modes ranges from 24.86% to 58.65%. Combined with the time-of-use electricity price in Shanghai city, the investment payback period of the system is approximately 5.98-7.45 years, and the isentropic efficiency improvement of the compressor and the expander is conducive to the enhancement of the system energy storage efficiency and the shortening of the investment payback period.
  • Journal of Chinese Society of Power Engineering. 2026, 46(2): 98-112.
    Wind power exhibits significant intermittency and stochastic characteristics, with its output power experiencing severe fluctuations due to wind speed variations. This poses substantial challenges for power system management, particularly in grid dispersion, penetration, and grid connection. As a core means to mitigate wind power uncertainty, wind power prediction technology plays a crucial role in enhancing grid stability, reducing wind curtailment rates, optimizing electricity market transactions, and promoting the sustainable development of wind power. This study systematically analyzed the classification, fundamental principles, and mainstream methodologies of wind power prediction, conducting an in-depth comparisons of the application scenarios, advantages, limitations, and evaluation index systems of various wind power prediction methods, such as physical modeling, statistical analysis, machine learning, and hybrid methods. Based on this, a comprehensively review was presented about the key technological pathways for improving prediction accuracy, covering cutting-edge research directions such as multi-source data fusion, deep learning algorithm optimization, and error correction mechanisms, and the latest research findings were also summarized. Finally, the prospect of the future development trends in wind power prediction technology was provided, proposing innovative solutions based on digital twins, reinforcement learning, and meteorological coupled modeling.
  • Journal of Chinese Society of Power Engineering. 2026, 46(2): 89-97.
    To investigate the power enhancement of large vertical axis wind turbines (VAWT) under different parallel arrangement spacings, and clarify the characteristics and differences of their wake flow fields across various dimensions, a large three-bladed H-type VAWT was selected as the research subject. The influence of paralleled spacing on the aerodynamic performance and flow field characteristics of VAWT units was analyzed through computational fluid dynamics methods in different dimensions. Results show that under the same arrangement spacing, both two-dimensional (2D) and three-dimensional (3D) parallel arrangements of VAWT exhibit an increase in output power, with the maximum enhancement observed at a spacing of 1.50 times of the rotor diameter. However, the power improvement obtained from two-dimensional simulations is significantly greater than that from three-dimensional simulations. The internal flow field characteristics of the VAWT rotor in three-dimensional simulations are more complex than those in two-dimensional simulations, with slight fluctuations in blade peak values during a single cycle. Furthermore, when the paralleled arrangement spacing is too small, the phenomenon of fluid acceleration channels between the units will be weakened, and the power increase will decrease. The three-dimensional visualization of the vortex tubes shows that the vortices in the wake are more difficult to dissipate, and the wake recovery requires a longer distance.
  • Journal of Chinese Society of Power Engineering. 2026, 46(2): 80-88.
    Short-term wind power forecasting is crucial for real-time dispatch of power systems. Reliable wind power forecasts not only ensure the safe operation of power system but also enhance the operational efficiency of power grid.To obtain more accurate and reliable wind power forecasting results, considering the nonlinear and time-series characteristics of wind power data, a short-term wind power forecasting method based on feature similarity day combined with CNN-BiLSTM-Attention was proposed. Firstly, the impact of meteorological factors on wind power output was fully considered, and the Spearman correlation coefficient was used to select the meteorological factors most correlated with wind power output as model input parameters. Next, the Gaussian mixture model (GMM) was used to conduct cluster analysis on the wind power data. The elbow method was used to determine the optimal number of clusters, and in combination with the feature similarity and cosine similarity entropy methods, the most relevant cluster type for the day under test was determined among the historical data. Finally, the CNN-BiLSTM-Attention model was used for training to deeply extract the temporal features of wind power and obtain more accurate wind power prediction results. Taking the actual wind power data of Xinjiang region as an example, a simulation analysis was conducted. The verification results show that the prediction accuracy of the method is high, and it can provide strong support for the planning and stable operation of the power system.
  • Journal of Chinese Society of Power Engineering. 2026, 46(2): 64-79.
    For the high-temperature solid oxide fuel cell/gas turbine (SOFC-GT) hybrid system technology, the research progress and challengers of the demonstration project, hardware-in-the-loop simulation and computational simulation of the SOFC-GT hybrid system were discussed. The future development trends of "high efficiency and cleanliness, combined cycle, and micro-distributed power generation" of this technology were discussed, as well as the corresponding extended technologies such as combustion chamber and turbine design.
  • Journal of Chinese Society of Power Engineering. 2026, 46(2): 54-63.
    To enhance the combustion performance and reduce pollutant emissions of heavy-duty gas turbines, the impact of fuel hole arrangement patterns on the combustion and emission characteristics of natural gas swirl nozzles was investigated. Based on the blade shape, four hole arrangement schemes were designed in total, with two schemes featuring centralized arrangement at the center of the blades and the other two adopting a relatively dispersed arrangement. A comparison was made among the four schemes regarding corresponding cold state fuel mixing performance and combustion thermal state performance under 100% load condition. Cold state calculation results indicate that when the fuel holes are concentrated in the middle of blades, the mixing effect with air is poor, with the fuel mainly concentrated in the root area of the swirler blades and unable to disperse circumferentially. The average non-uniformity of the equivalence ratio at the nozzle outlet can reach 15.19%. In contrast, for the dispersed arrangement schemes, the fuel mixing performance is good, and the average non-uniformity of the equivalence ratio at the nozzle outlet is only 1.49%. Thermal state calculation results show that when the arrangement of fuel holes is concentrated, localized high-temperature regions are generated during combustion, leading to an increase in local NOx emission. However, in dispersed arrangement schemes, the combustion temperature is no more than 1 800 K, and the NOx emissions remain at a low level. A comprehensive analysis concludes that the fuel holes should be arranged as dispersedly as possible, with the outer holes positioned close to the outer edges of the swirl blades and the inner holes appropriately distanced from the blade roots.
  • Journal of Chinese Society of Power Engineering. 2026, 46(2): 45-53.
    Based on the reliability operation and maintenance requirements for rotating blades of heavy-duty gas turbines, a lightweight modeling method was developed by reducing the order of numerical simulation results, and combining proper orthogonal decomposition (POD) reduced-order technique and a data-driven machine learning regression fitting approach, so as to realize the rapid prediction of creep life using Larson-Miller method. Results indicate that the proposed reduced-order model can achieve a maximum prediction error of no more than 5% for blade creep life at five critical nodes, while the computational efficiencies of the reduced-order method for temperature field and stress field are 9.00×105 and 1.50×105 times that of traditional simulation method, respectively. Relevant research findings can provide significant theoretical and methodological support for the online operation and maintenance monitoring of rotating blades in heavy-duty gas turbines.
  • Journal of Chinese Society of Power Engineering. 2026, 46(2): 36-44.
    The numerical simulation results of low Reynolds number turbine cascade flows are related to the computational boundary conditions and turbulence prediction capabilities. By applying the ensemble Kalman filtration method, a data assimilation approach was established, which is based on computational fluid dynamics (CFD) solutions obtained from a small amount of experimental measurement data and Reynolds-averaged Navier-Stokes (RANS) equations. After which, the proposed method was validated on two typical turbine cascades. The velocity distribution at the inlet of the cascade computational domain was corrected through using the measured values of the trail profile in the guide cascade. After assimilation, the average relative error of trail loss is reduced by 30%. For the PakB blade profile, eight preset constants of shear stress transport (SST) model were assimilated by using the measured values of static pressure on the blade surface. After assimilation, the average relative error of static pressure coefficient on the blade surface is reduced by 21%. With data assimilation based on experimental measurements, uncertainties in CFD simulations are reduced, and the credibility of analyzing low Reynolds number turbine flows by RANS equations is enhanced.
  • Journal of Chinese Society of Power Engineering. 2026, 46(2): 28-35.
    To address the issues of central air duct wear and poor low-load combustion stability performance present in the new type of low-NOx axial swirl burner (the burner before optimization is referred to as the original burner), the central air structure of the burner was eliminated (the burner after optimization is referred to as the optimized burner). Laboratory 1∶4 cold-state single-phase modeling experiments were conducted on above two types of burners to investigate the impact of the presence or absence of the central air structure on the outlet flow field of the burner. Meanwhile, industrial experiments were carried out on a 350 MW opposed-firing boiler burning bituminous coal that employed these two types of burners. Results show that both the original burner and the optimized burner form an annular recirculation zone at the burner outlet, while the recirculation zone area of the optimized burner is larger. The height of the recirculation zone increases from 0.07 m (0.2d, where d is the flared diameter of the outer secondary air) to 0.1 m (0.28d), representing a 43% increase in height. The ignition distance of the optimized burner is approximately 1 m, while that of the original burner is approximately 1.15 m. The optimized burner experiences earlier ignition, with O2 content decreasing and CO being generated earlier and faster.
  • Journal of Chinese Society of Power Engineering. 2026, 46(2): 21-27.
    P92 steel had been widely used in high temperature components of ultra-supercritical units (such as steam piping and header) because of its excellent high-temperature comprehensive properties. However, there was still an urgent need to conduct research on the material degradation mechanisms and effective supervision methods to ensure the units' safe operation for long-term service. Microstructure analysis and mechanical property test of original P92 steel material for high temperature components of power plants were implemented. The evolution characteristics of material property and substructure had been traced for more than 10 years. The evolution law of microstructure and property was summarized and the degradation mechanism was studied. On this base, the relationship between material hardness, microstructure and degradation level was established for grade 92 steel during the whole lifetime, and a quick and nondestructive method for service supervision was proposed. Results show that the proposed method can provide a reference evidence for inspection, material evaluation and operational supervision of 9Cr steel in nuclear power plants.