Latest ArticlesBy using ambient air as the oxidant and malic acid as the promoter, a practical method for the preparation of 2-aminobenzothiazoles through visible-light-initiated cascade reaction of aromatic amines and KSCN in eco-friendly bis(methoxypropy)ether under metal-, hazardous additive-, photocatalyst-free conditions was established.
Herein, a series of carbazolyl cyanobenzene (CCB)-based organic photocatalysts with a broad range of photoredox capabilities were designed and synthesized, allowing precise control of the photocatalytic reactivity for the controllable reduction of aryl halides via a metal-free process. The screened-out CCB (5CzBN), a metal-free, low-cost, scalable and sustainable photocatalyst with both strong oxidative and reductive ability, exhibits superior performance for both dehalogenation and C-C bond-forming arylation reactions.
A synthetic study toward the structurally complex rearranged-type C19-diterpenoid alkaloids leading to construction of the strained 6/3/5/6 tetracyclic core is presented. The synthesis features an intramolecular Diels-Alder cycloaddition reaction to assemble the highly substituted central cyclopropane motif, which may serve as a key strategy for the total synthesis of relevant natural product molecules.
The synthesis of the ACE tricyclic system ofdaphnicyclidin A and dehydroxymacropodumine A are developed. The key reactions include an efficient aldol reaction to introduce chiral fragment 33 for further construction of piperidine ring B and seven -membered ring C, a nucleophilic addition of lithium pentene to aldehyde for installation of ring E, and a photocatalytic decarboxylation conjugate addition to construct ring C.
An efficient protocol for the synthesis of asymmetric 1, 3-diketones was reported through diacylation of 1, 1-diborylalkanes using two different acyl sources. In this transformation, an enolate boron species was initially formed by introducing an acyl group, then it was trapped by another acyl group to form 1, 3-diketone. This method not only provided the gateway to obtain a series of 1, 3-diketones, but also afforded an operationally simple and efficient access to pyrazoles and isoxazoles.
Unremitting efforts have been intensively making for pursuing the goal of the reversible transition of electrowetting owing to its vital importance to many practical applications, but which remains a major challenge for carbon nanotubes due to the irreversible electrochemical damage. Herein, we proposed a subtly method to prevent the CNT array from electrochemical damage by using liquid medium instead of air medium to form a liquid/liquid/solid triphase system. The dimethicone dynamically refills in CNT arrays after removing of voltage that makes the surface back to hydrophobic, which is an elegant way to not only decrease energy dissipation in electrowetting process but also obtain extra energy in reversible dewetting process. Repeated cycles of in situ experiments showed that more than four reversible electrowetting cycles could be achieved in air. It worth mention that the in situ reversible electrowetting voltage of the dimethicone infused CNT array has been lowered to 2 V from 7 V which is the electrowetting voltage for the pure CNT array. The surface of the dimethicone infused CNT array can maintain hydrophobicity with a contact angle of 145.6° after four cycles, compared with 148.1° of the initial state. Moreover, a novel perspective of theoretical simulations through the binding energy has been provided which proved that the charged CNTs preferred binding with water molecules thereby replacing the dimethicone molecules adsorbed on the CNTs, whereas reconnected with dimethicone after removing the charges. Our study provides distinct insight into dynamic reversible electrowetting on the nanostructured surface in air and supplies a way for precise control of wettability in surface chemistry, smart phase-change heat transfer enhancement, liquid lenses, microfluidics, and other chemical engineering applications.
A novel BODIPY (boradiazaindacene) dye denoted as BODIPY-DT containing terpyridine unit has been designed and characterized. The dye is found to be selective and visual solvatochromic sensor toward DMF among test organic solvents. The sensing process displays time-controllable, dynamic signal outputs in the emission colors including red, purple, yellow and even white emission colors. It is presented that selective free radical oxidation reaction happens during the recognition process.
A TFA promoted multi-component reaction of aryldiazonium with sodium metabisulphite and thiols to construct thiosulfonates under transition-metal free conditions is reported. The thiosulfonates were isolated in good yields with broad tolerance of functional group. Readily available inorganic Na2S2O5 was applied as the sulfur dioxide surrogate. This strategy features easily available substrates, mild reaction conditions and free transition-metal catalyst.
To achieve high power conversion efficiency (PCE), three porphyrin sensitizers have been synthesized and explored to simultaneously enhance the photocurrent (Jsc) and photovoltage (Voc). On basis of the XW4, a benzothiadiazole (BTD) unit has been introduced to afford XW57 with the aim to extend the absorption wavelength and enhance the light harvesting ability. As a result, a Jsc of 13.72 mA/cm2 has been obtained for XW57, higher than that of XW4. On this basis, XW58 has been prepared by modifying the carbazole-based donor with two bulky dihexyloxyphenyl groups, and the superior anti-aggregation character raises the Voc from 781 mV (XW4) to 844 mV. When both the BTD unit and the bulky groups are introduced to the acceptor and donor units, respectively, the resulting sensitizer XW59 exhibits a highest PCE value of 7.34% with synergistically enhanced Jsc of 13.19 mA/cm2 and Voc of 793 mV. These results provide further insight into developing high performance dye-sensitized solar cells
Amphiphilic block copolymers poly(ethylene glycol)-block-poly(N-3-(methylthio)propyl glycine) (PEG-b-PMeSPG) were synthesized via ring-opening polymerization of N-3-(methylthio)propyl glycine N-thiocarboxyanhydride (MeSPG-NTA) initiated by amino-terminated PEG. The self-assemblies of three PEG-b-PMeSPG copolymers with different PMeSPG block lengths were first prepared by nanoprecipitation method using THF and DMF, respectively, as the organic solvent, and their morphologies were studied by Cryo-EM and DLS. To prepare polymersomes loaded with glucose oxidase (GOx), double emulsion method followed by extrusion treatment was employed. The oxidation-responsive disruption of polymersomes was achieved upon the introduction of glucose because of the oxidants generated in-situ by GOx/glucose.
No. 86 Xueyuan South Road, Haidian District, Beijing
010-62662699(Operation and Technical Support)
qkjq@cast.org.cn
Copyright © 2025 China Association for Science and Technology. All rights reserved. For all open access content, the relevant licensing terms apply.
Sponsored by the Office of the Leading Group for Cybersecurity and Informatization of CAST, and supported by Science and Technology Review Publishing House
