Latest ArticlesCysteine (Cys) plays an important role in regulating cellular redox balance. But due to the constant changes in the concentration of Cys in organisms, fast response sensors are urgent required for practical application. In this work, a fluorescent probe with a fast response was developed by linking coumarin derivatives containing α, β-unsaturated ketones to NBD. The PET effect made the system non-fluorescent. When the probe reacted with Cys, the bond between the coumarin derivative and the NBD was cut off, meanwhile a rapid rearrangement and reactive site passivation occurred. Then two fluorophores with the same emission peak are released, among them, strong fluorescence signal of NBD dominated. Thus, although the similar reaction occurred for Hcy, the rate of NBD derivative rearrangement was slow, in a short time, fluorescence signal was still weak. As for GSH, cleavage could occur, but no rearrange within the NBD molecule due to GSH with large volume. Because of strong fluorescent emission, this probe was successfully used in biological imaging about cell and zebrafish. More importantly, the probe was successfully used to evaluate the oxidative stress caused by copper(II) in living cells. This fluorescence strategy and application will provide a new way of studying intracellular oxidative stress processes and damage.
To realize a fast, easy-operation and precise way using fluorescence probes to quantify analytes is a goal to facilitate detection, especially in situ. Herein, we are reporting an approach which can be generally employed for the differentiation and quantitation of analytes through fluorescence chromaticity and luminosity. Seven representative fluorescent probes, targeting pH, cysteine, hydrogen sulfide, hydrogen peroxide, palladium and hydrazine, were synthesized and tested. Without utilizing costly instrumentations, portable devices were employed to collect data of photographs from the fluorescence samples in responses to different analytes. Subsequently, the photographic images were digitally processed to generate calibration curves between chromaticity/luminosity verse concentrations after mapping to the CIE 1931 xyY standard color space. Good linear calibration curves and quantitative analysis of unknown samples with low errors through the spectral technology demonstrated the reliability of this method. Thus, we showed the analytical method with a simple and on-site constructible/portable device which is promising for applications in more fluorescence probes
Fluorescent probes have been widely employed in biological imaging and sensing. However, it is always a challenge to design probes with high sensitivity. In this work, based on rhodamine skeleton, we developed a general strategy to construct sensitivity-enhanced fluorescent probe with the help of theoretical calculation for the first time. As a proof of concept, we synthesized a series of HOCl probes. Experiment results showed that with the C-9 of pyronin moiety of rhodamine stabilized by an electron donor group, probe DQF-S exhibited an importantly enhanced sensitivity (LOD: 0.2 nmol/L) towards HOCl together with fast response time (< 10 s). Moreover, due to the breaking symmetrical electron distribution by another electron donor group, the novel rhodamine probe DQF-S displayed a far red to near-infrared emission (>650 nm) and large Stokes shift. Bioimaging studies indicated that DQF-S can not only effectively detect basal HOCl in various types of cells, but also be successfully applied to image tumor tissue in vivo. These results demonstrate the potential of our design as a useful strategy to develop excellent fluorescent probes for bioimaging.
Polymorphism makes it possible to clarify the relationship between emission property and crystal structure. However, based on the exact molecular conformation in tetraphenylethene polymorphisms, it is still challenging to evaluate the difference of intramolecular coplanarity without the support of calculation because of the complex combination of four different torsion angles between four peripheral benzenes and the central ethylene plane. Here, by using a di-formyl-functionalized tetraphenylethene derivative, two ideal polymorphisms with a consistent trend of the corresponding torsion angles have been obtained. For the first time, we explicitly demonstrated that intramolecular coplanarity is the underlying cause of the polymorphism-dependent emission of tetraphenylethene derivatives.
From emerging pollutants to emerged threat, researchers are continuously looking for promising technologies for wastewater treatment. Adsorption has been identified as the most convenient approach for treating wastewater at low-cost and with high-efficiency. Recently, graphene and its derivatives have gained heightened attention as novel adsorbents because of their unique molecular structure and outstanding physicochemical properties. Heavy metals, dyes, polycyclic aromatic hydrocarbons (PAHs) and other pollutants, which are widely concerned recently, all show different adsorption behaviors. Numerous functional groups, resonating and delocalized π-electron system of graphene derivatives lead to the formation of various adsorptive interactions i.e., π-π interactions, electrostatic interactions, H-bonding, etc. with these venomous pollutants, and quarantine them in solution. The pristine form of graphene subsidiaries tends to exhibit low sorption efficiency due to high propensity of agglomeration, lack of selectivity, hydrophobicity and difficulty in phase separation after treatment. Therefore, designing of efficient graphene composites through the surface modification with numerous functional groups, polymers or nanoparticles is an ongoing challenge. Complex graphene composites are increasingly reported, but the fate of pollutants and adsorption mechanisms are still far to be fully clarified. This review summarizes the recent progresses in the application of graphene-based adsorbents for eliminating a wide range of organic and inorganic pollutants from wastewater. A critical explanation is provided on the synthesis of graphene adsorbents, systematic adsorption and desorption mechanisms along with their pollutant removal performances under different experimental conditions. A brief perspective on upcoming research needs and challenges involved in the designing of high-quality graphene-based adsorbents are highlighted.
Global climate change, growing population, and environmental pollution underscore the need for a greater focus on providing advanced water treatment technologies. Although electrochemical based-processes are becoming promising solutions, they still face challenges owing to mass transport and upscaling which hinder the exploitation of this technology. Electrode design and reactor configuration are key factors for achieving operational improvements. The electroactive membrane has proven to be a breakthrough technology integrating electrochemistry and membrane separation with an enhanced mass transport by convection. In this review article, we discuss recent progress in environmental applications of electroactive membranes with particular focus on those composed of carbon nanotubes (CNT) due to their intriguing physicochemical properties. Their applications in degradation of refractory contaminants, detoxification and sequestration of toxic heavy metal ions, and membrane fouling alleviations are systematically reviewed. We then discuss the existing limitations and opportunities for future research. The development of advanced electroactive systems depends on interdisciplinary collaborations in the areas of materials, electrochemistry, membrane development, and environmental sciences.
The selective catalytic reduction (SCR) of NOx by NH3 is one of the most mature technologies for NOx treatment. Catalysts are the main factors affecting denitrification efficiency. Zeolites as low-temperature NH3-SCR catalysts have been extensively studied in the past few years. In this work, the mechanism of zeolites for NH3-SCR reaction was reviewed and the denitrification performances of zeolite catalysts prepared by different methods were compared. The effects of sulfur and water poisoning on zeolite catalysts in NH3-SCR reaction were also analyzed. Several ways to address the problems in low-temperature NH3-SCR reaction were discussed. Hopefully, this review could provide a fundamental understanding of SCR reaction on zeolite catalysts and pave the way toward similar studies to realize its commercial applications.
Photocatalyst is the most widespread method in advanced oxidation technologies, but due to the photo-induced electron combine easily with hole and the wavelength of adsorption is limited which will affect some practical applications. Carbon quantum dots (CQDs) is non-toxic and harmless green materials, it has the ability to improve the photocatalytic effect which is attributed to its good electrical and optical properties. Their up-conversion effect, photosensitization and electrical conductivity are assistants which help promote the photocatalytic effect in environmental applications. The key mechanisms of CQDs to improve photocatalysis can be roughly divided into three categories: 1) Up-conversion effect converts the incident light into the emitted light with high energy to solve the problem which is the light absorption range; 2) CQDs act as a photosensitizer instead of valence band to provide electrons to the conduction band of semiconductor; 3) CQDs can be used as the internal or external electronic conductor in materials to alleviate the trend of electron and hole separation. However, CQDs and CQDs-based photocatalysts have different views to solve environmental problems, so it is necessary to integrate different views. Therefore, this review is mainly aimed at the recent researches about the preparation processes of CQD, CQDs-based photocatalysts, and their ability to remove environmental pollutants, with a special emphasis on the mechanism for depredating pollutants. Furthermore, this paper analyzes and discusses the prospects and challenges of CQDs in the environmental field.
Sulfur-driven autotrophic denitrification (SDAD), a process suited for the treatment of nitrogen and sulfur-polluted wastewater without extra supplement of organic carbon, is a promising biological nitrogen removal process. However, the SDAD process was affected by many factors such as various electron donors, organic carbon and exogenous substances (e.g., antibiotics and heavy metal), which prevent further application. Thus, we conducted a detailed review of previous studies on such influence factors and its current application. Besides, a comparative analysis was adopted to recognize the current challenges and future needs for feasible application, so as to ultimately perfect the SDAD process and extend its application scope.
Heavy metal complexes with high mobility are widely distributed in wastewater from modern industries, which are more stable and refractory than free heavy metal ions. Their removals from wastewater draw increasing attentions and various technologies have been developed, among which advanced oxidation processes (AOPs) are more effectively and promising. Progresses on five representative types of AOPs, including Fenton (like) oxidation, electrochemical oxidation, photocatalytic oxidation, ozonation and discharge plasma oxidation for heavy metal complexes degradation are summarized in this review. Their rationales, advantages, applications, challenges and prospects are introduced independently. Combi-nations among these AOPs, such as electrochemical Fenton oxidation and photoelectrocatalytic oxidation, are also comprehensively highlighted. Future efforts should be made to reduce acid requirement and scale up for practical applications of AOPs for heavy metal complex degradation efficiently and cost-effectively.
No. 86 Xueyuan South Road, Haidian District, Beijing
010-62662699(Operation and Technical Support)
qkjq@cast.org.cn
Copyright © 2025 China Association for Science and Technology. All rights reserved. For all open access content, the relevant licensing terms apply.
Sponsored by the Office of the Leading Group for Cybersecurity and Informatization of CAST, and supported by Science and Technology Review Publishing House
