Home Latest Articles
Latest Articles
  • Huiping SUN, Kai XU, Guoxi ZHANG, Wenzhong CHEN, Guang CHENG
    Chinese Journal of Pharmaceuticals. 2022, 53(6): 849-856.

    G3139(1), an antisense oligonucleotide, can downregulate the expression of B-cell lymphoma-2(Bcl-2) protein and mRNA expression so as to promote the apoptosis of tumor cells. In this study, 1 was encapsulated in the cationic lipid nanoparticles by a two-step hybrid method within microfluidic devices to enhance the uptake of 1 in human large cell lung cancer cell line(NCI-H460), and the in vivo stability of the cationic lipid nanoparticles was enhanced by incorporating of the PEGylation lipid. The long-circulating cationic lipid nanoparticles loaded with 1(GLNPs) exhibited the averaged size of (89.6±3.2)nm and ζ potential of (20.9±2.4) mV. The results of agarose gel electrophoresis and the calculated encapsulation efficiency[(93.6±2.5)%] showed that 1 was successfully encapsulated by the lipid nanoparticles. The cytotoxicity and cellular uptake of GLNPs were significantly higher than those of the free 1. In the NCI-H460 tumor-bearing nude mouse models, GLNPs inhibited a more significant inhibitory effect on tumor growth, compared with the free 1. Moreover, the tumor inhibitory rate of the combinational group of GLNPs and paclitaxel injection was(73.1±10.3)%, which was significantly higher than that of other single or combined administration groups. In pharmacodynamics test, there was no significant difference in the body weight of tumor-bearing nude mouse in each group, suggesting the low toxicity of this product. In conclusion, GLNPs prepared by this two-step hybrid method could be a promising nucleic acid delivery system in clinical application.

  • Bin NI, Chang GAO, Chunyun FANG, Yan LI, Chunyu GUO
    Chinese Journal of Pharmaceuticals. 2022, 53(6): 857-861.

    The liposomes loaded with total flavones of Artemisia capillaris Thunb. were prepared by ethanol injection method, and N-trimethyl chitosan with positive charge was used to coat on the liposomes. Then, lyophilization was adopted to enhance the storage stability of the prepared liposomes. The results of single factor tests showed that lyophilized liposomes with good appearance and reconstitution profiles were obtained by using 6% of trehalose as a lyoprotectant. The encapsulation efficiency, particle size, polydispersity index(PDI) and ζ potential of the liposomes before and after lyophilization were (91.8±0.5)% and (92.5±0.3)%, (164.0±4.2) and (165.5±5.9)nm, 0.255±0.007 and 0.361±0.030, (23.8±0.2) and (21.6±0.4)mV, respectively. Under the transmission electron microscope, the reconstituted liposomes were spherical in shape. Furthermore, the liver protection effect of the liposomes was investigated with carbon tetrachloride-induced acute liver injury in murine models. Compared with model group, the levels of alanine aminotransferase(ALT), glutamic-oxaloacetic transaminase(AST) in serum and malonaldehyde in liver tissue of the liposomes treated group were significantly reduced, which demonstrated the title liposomes had a remarkable protective effect on acute hepatic injury in mice. This study can provide a new idea for the oral delivery of traditional Chinese medicine components with low solubility.

  • Hui GUO, Mingjin XUN, Zhong FENG, Guimin ZHANG, Qingyan CUI
    Chinese Journal of Pharmaceuticals. 2022, 53(6): 862-867.

    The carbidopa levodopa sustained-release tablets were prepared, which contained a combination of microcrystalline cellulose(MCC), hydroxypropyl methyl cellulose(HPMC) and hydroxypropyl cellulose(HPC) instead of the key excipient, poly(vinyl acetate-co-crotonic acid), in the original preparation(Sinemet®). The amounts of MCC, HPMC and HPC were optimized with the release data of carbidopa and levodopa from the sustained-release tablets in 0.1 mol/L hydrochloric acid. The results showed that the release behaviors of carbidopa and levodopa from the self-made sustained-release tablets with 8% of MCC, 1.6% of HPMC and 6% of HPC and the original preparation were similar. Moreover, this preparation process was robust and had low inter-batch variability. 1-Methyl-4-phenyl-1,2,3,6-tetrahydropyridine-induced mouse model of Parkinson disease(PD) was established to evaluate the pharmacodynamics. The results showed that there were significant differences in scores of mice swimming and suspension tests, and dopamine level between the model group and the self-made sustained-release tablets, suggesting that the self-made tablets had a potential therapeutic effect for PD.

  • Mengtao ZHAO, Renyu FAN, Kangming ZHOU, Huimin SUN, Chuanyun DAI
    Chinese Journal of Pharmaceuticals. 2022, 53(6): 868-875.

    To address the problem of difficulty in obtaining discrete element parameters for micron-sized pharmaceutical excipient pregelatinized starch, the radius of pregelatinized starch was scaled up to 1 mm according to the dimensional theory, then the optimal values of discrete element parameters that significantly affected the angle of repose determined by lifting cylinder method were obtained by applying Plackett-Burman design, steepest climb experiment and Box-Behnken design. On this basis, the reasons for the differences in angle of repose result of the same material caused by different lifting speeds were revealed from the perspective of force chain. The results showed that the optimum values of the significant discrete element parameters were as follows: 0.503 for the pregelatinized starch-pregelatinized starch static friction coefficient, 0.276 for the pregelatinized starch-pregelatinized starch rolling friction coefficient, 0.256 for the pregelatinized starch-stainless steel rolling friction coefficient, and the relative error between simulated and measured results for angle of repose was 0.88%. Lifting speed mainly affected the number, rate of change and size of the force chain in the lifting stage. Lower lifting speed eventually formed a larger number of force chains, larger inter-particle forces and larger angles. The simulation results were basically not different from the real experiment results, indicating that the parameters obtained by calibration were accurate and provided a reference for the selection of discrete element parameters of micron-sized pharmaceutical excipient pregelatinized starch. The force chain analysis revealed the force distribution pattern and provided a theoretical basis for the simulation of mixing, transferring and tabletting of solid formulations in the pharmaceutical process.

  • Huixia CHAI, Haifeng ZHANG, Duanfang SHAO, Li QUAN, Xiaodai CUI, Rong LIU
    Chinese Journal of Pharmaceuticals. 2022, 53(6): 876-882.

    An ultra-high performance liquid chromatography-tandem mass spectrometry(UPLC-MS/MS) method was established for the determination of busulfan(1) in plasma from pediatric patients. The ACQITY UPLC®HSS T3 column(2.1 mm×50 mm, 1.8 μm) was used, and the multiple reaction monitoring mode was adopted with the electrospray ion source for positive ion segmental scanning analysis. The results showed that it was linear for 1 in the range of 20 - 3 000 ng/ml, and the quantification limit of the method was 5 ng/ml. The intra- and inter-day precisions were below 5%. The average extraction recoveries were 90% - 110%, and the residual effect was 0.01%. The concentration of 1 decreased by 22% after storage at room temperature for 24 h, indicating that the plasma sample was unstable under this condition. While under the other storage conditions(4, –20 and–80 ℃), the concentrations of 1 were basically unchanged within one week. The established method required a small amount of plasma sample, and even 1 μl of plasma could be used for detection. This method was fast, accurate and reliable, which provided a reference for pediatric therapy and pharmacokinetic studies of 1.

  • Xian YANG, Fanghong ZHAO, Haiting HOU
    Chinese Journal of Pharmaceuticals. 2022, 53(6): 883-889.

    A high-performance liquid chromatography-tandem mass spectrometry(LC-MS/MS) method was established for the determination of terbutaline sulfate(1) in the respiratory tract tissues of rats, and the distribution of 1 as well as the dynamic changes in vivo in tracheobronchial and lung tissues after inhalation administration was investigated. The Eclipse XDB-C8 column(4.6 mm×150 mm, 5 μm) was used, with the electrospray ionization(ESI) and multiple response monitoring(MRM) mode. The results showed that it was linear for 1 in the ranges of 10.1 - 10 100 ng/g(tracheobronchial tissue) and 5 - 5 000 ng/g(lung tissue), and the limits of quantification were 10.1 and 5 ng/g, respectively. The intra-day precision(n=6) of 1 in rat tracheobronchial and lung tissues were all less than 4%, which met the requirements of quantitative analysis of biological samples. After inhalation administration to rats, 1 showed a similar dynamic change process in rat tracheobronchial and lung tissues, and the maximum concentration reached after administration, followed by rapid elimination. A higher concentration of 1 was found in tracheobronchial tissue, indicating its distribution was higher than that in lung tissue. The established LC-MS/MS method was fast, convenient and accurate, which provided a reference for the clinical rational drug use of 1 aerosol inhalation solution.

  • Yuanhua ZHOU, Liwen ZHANG, Shunling DONG
    Chinese Journal of Pharmaceuticals. 2022, 53(6): 890-895.

    A normal phase HPLC method was established for the determination of all-trans vitamin A palmitate(2) and vitamin D2(3) in vitamin AD micropellets(1), and the pretreatment only required one-step extraction with n-hexane. A Phenomenex Luna NH2 100A column(4.6 mm×250 mm, 3 μm) was used, with the mobile phase of n-hexane, and the detection wavelength was 265 nm. The results showed that it was linear for all-trans 2 and 3 in the ranges of 329.4 - 1 647.1 and 19.23 - 192.3 IU/ml, respectively. The repeatability RSDs of all-trans 2 and 3(n=6) were 0.6% and 0.5%, and the detection limits were 0.015 and 0.28 IU/ml, respectively. The mean recoveries(n=9) of all-trans 2 and 3 were 100.7% and 99.3%, with the RSDs of 1.9% and 0.9%, respectively. The extraction method could completely extract all-trans 2 and 3 from 1 in one-step, and the determination method could accurately determine the contents of all-trans 2 and 3 with high specificity and sensitivity, which provided a reference for the quality control of 1.

  • Yaju ZHOU, Bin ZHANG, Jun XU, Weiyi LU, Rong CAI
    Chinese Journal of Pharmaceuticals. 2022, 53(6): 896-900.

    An inductively coupled plasma-optical emission spectrometry(ICP-OES) method was established to determine the extraction amounts of aluminum, boron and silicon elements in glass containers for human albumin(1) packaging, and two media(3% sodium citrate solution and 0.9% potassium chloride solution) were used for simulated extraction. The accelerated stability test was carried out for eleven batches of 1 sample, and the changes of aluminum residues in the samples were investigated when they were placed for 0, 1, 3, and 6 months. And the influences of extractable elements of aluminum, boron and silicon in glass containers on the residual amount of aluminum in 1 were investigated after being placed for six months. The results showed that the established method was simple, feasible, accurate and reliable. The two extraction solutions could extract aluminum, boron and silicon elements, and more extractable amounts were detected in 3% sodium citrate solution. During the accelerated storage of 1, the residual aluminum content increased gradually with the increased time. And there was a certain correlation between the extractable elements in the glass container for 1 packaging and the aluminum residue in 1 sample, which provided reliable data support for the quality supervision of the glass containers for 1 packaging.

  • Jianhe SUN, Honghua LU, Jipeng HOU, Guizhou HAO, Guimin ZHANG
    Chinese Journal of Pharmaceuticals. 2022, 53(6): 901-903.

    A gas chromatographic method was established for determination of the structural alerts, the unsaturated ketones mesityl oxide(2) and phorone(3), in prasugrel hydrochloride(1). The DB-624 capillary column(30 m×0.53 mm×3.0 μm) was used with temperature programming, and the direct injection method was used for the determination. The results showed that it was linear for 2 and 3 in the range of 5 - 30 μg/ml, the average recoveries(n=9) of 2 and 3 were 101.25% and 102.23%, with the RSDs of 0.66% and 0.79%, respectively. The limits of quantification of 2 and 3 were respectively 2.77 and 2.89 μg/ml, and the limits of detection were respectively 1.11 and 1.16 μg/ml. The established method has strong specificity, high sensitivity and good durability, which can be used for the determination of 2 and 3 in 1.

  • Yuanyuan GE, Hui CAO, Yanchen HU, Yamin WANG, Di HU
    Chinese Journal of Pharmaceuticals. 2022, 53(6): 904-911.
News