收藏切换
Discrete Element-based Calibration of Simulation Parameters and Force Chain Analysis of Angle of Repose of Pregelatinized Starch
收藏切换
Mengtao ZHAO1, Renyu FAN1, Kangming ZHOU1, Huimin SUN2, Chuanyun DAI1, *
Chinese Journal of Pharmaceuticals | 2022, 53(6) : 868 - 875
Less
收藏切换
Chinese Journal of Pharmaceuticals | 2022, 53(6): 868-875
• Paper •
Discrete Element-based Calibration of Simulation Parameters and Force Chain Analysis of Angle of Repose of Pregelatinized Starch
Full
Mengtao ZHAO1, Renyu FAN1, Kangming ZHOU1, Huimin SUN2, Chuanyun DAI1, *
Affiliations
  • 1.Chongqing Key Lab. of Industrial Fermentation Microorganisms, College of Chemistry and Chemical Engineering, Chongqing University of Science and Technology, Chongqing 401331
  • 2.NMPA Key Lab. of Quality Research and Evaluation of Pharmaceutical Excipients, China Institute for Food and Drug Control, Beijing 100050
Published: 2022-06-10 doi: 10.16522/j.cnki.cjph.2022.06.015
Outline
收藏切换

To address the problem of difficulty in obtaining discrete element parameters for micron-sized pharmaceutical excipient pregelatinized starch, the radius of pregelatinized starch was scaled up to 1 mm according to the dimensional theory, then the optimal values of discrete element parameters that significantly affected the angle of repose determined by lifting cylinder method were obtained by applying Plackett-Burman design, steepest climb experiment and Box-Behnken design. On this basis, the reasons for the differences in angle of repose result of the same material caused by different lifting speeds were revealed from the perspective of force chain. The results showed that the optimum values of the significant discrete element parameters were as follows: 0.503 for the pregelatinized starch-pregelatinized starch static friction coefficient, 0.276 for the pregelatinized starch-pregelatinized starch rolling friction coefficient, 0.256 for the pregelatinized starch-stainless steel rolling friction coefficient, and the relative error between simulated and measured results for angle of repose was 0.88%. Lifting speed mainly affected the number, rate of change and size of the force chain in the lifting stage. Lower lifting speed eventually formed a larger number of force chains, larger inter-particle forces and larger angles. The simulation results were basically not different from the real experiment results, indicating that the parameters obtained by calibration were accurate and provided a reference for the selection of discrete element parameters of micron-sized pharmaceutical excipient pregelatinized starch. The force chain analysis revealed the force distribution pattern and provided a theoretical basis for the simulation of mixing, transferring and tabletting of solid formulations in the pharmaceutical process.

pregelatinized starch  /  discrete element method  /  parameter calibration  /  angle of repose  /  force chain
赵孟涛, 范仁宇, 周康明, 孙会敏, 戴传云. 预胶化淀粉离散元仿真参数标定及休止角力链分析. 中国医药工业杂志, 2022 , 53 (6) : 868 -875 . DOI: 10.16522/j.cnki.cjph.2022.06.015
Mengtao ZHAO, Renyu FAN, Kangming ZHOU, Huimin SUN, Chuanyun DAI. Discrete Element-based Calibration of Simulation Parameters and Force Chain Analysis of Angle of Repose of Pregelatinized Starch[J]. Chinese Journal of Pharmaceuticals, 2022 , 53 (6) : 868 -875 . DOI: 10.16522/j.cnki.cjph.2022.06.015
Year 2022 volume 53 Issue 6
83
21
Cite this Article
BibTeX
Article Info
doi: 10.16522/j.cnki.cjph.2022.06.015
  • Receive Date:2021-09-06
  • Online Date:2026-11-12
  • Published:2022-06-10
Article Data
Affiliations
History
  • Received:2021-09-06
Funding
Affiliations
    1.Chongqing Key Lab. of Industrial Fermentation Microorganisms, College of Chemistry and Chemical Engineering, Chongqing University of Science and Technology, Chongqing 401331
    2.NMPA Key Lab. of Quality Research and Evaluation of Pharmaceutical Excipients, China Institute for Food and Drug Control, Beijing 100050
References
Share
https://castjournals.cast.org.cn/joweb/zgyygy/EN/10.16522/j.cnki.cjph.2022.06.015
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT