Home Latest Articles
Latest Articles
  • Fei WU, Lan CHEN, Donghao CHEN
    Chinese Journal of Pharmaceuticals. 2023, 54(10): 1467-1474.

    The effects of peak inhalation flow rate(PIFR) and flow increase rate(FIR) on the in vitro deposition performance of three dry powder inhaler(DPI) models with different fine lactose ratios were investigated. Three formulations(formulation A with a fine lactose ratio of 10%, formulation B of 5%, and formulation C without fine lactose) were prepared by mixing budesonide with coarse lactose carrier and fine lactose. The efficiency of particle deposition was assessed by using the Alberta idealized mouth-throat model and a next generation impactor system. In vitro testing was performed at PIFRs of 30, 60, and 90 L/min and two FIRs(representing fast and slow inhalation conditions, respectively). The total lung dose(TLD) of formulations A and B showed a dependence on PIFR; but the TLD of formulation C which was not affected by PIFR was most affected by FIR. In addition, the small airways dose(SAD) of all three formulations was significantly higher at fast FIR than those at slow FIR(P<0.05). In addition to PIFR, FIR was an important factor affecting the in vitro performance of DPI. Within the scope of the experiments in this study, the fine lactose ratio of the formulations had a positive correlation with the deposition performance, showing a lower sensitivity to the FIR, but was more dependent on the PIFR.

  • Fangyuan WANG, Yuru HOU, Xiaoqing REN, Yaoyao ZHAO, Mintong GUO
    Chinese Journal of Pharmaceuticals. 2023, 54(10): 1475-1484.

    Polyvinyl alcohol(PVA) and methyl vinyl ether and maleic acid copolymer(PVM/MA) or methyl vinyl ether and maleic anhydride copolymer(PMVE/MAH) were used as composite matrix materials to prepare hydrogel microneedles by thermal crosslinking method. The effects of crosslinking temperature, time, and material type on the morphology and swelling rate of hydrogel microneedles were investigated to optimize the thermal crosslinking conditions. Hydrogel microneedles prepared with PVM/MA and PVA(1∶1) at 80 ℃/2 h, 95 ℃/0.5 h and 110 ℃/0.5 h, and PMVE/MAH and PVA(1∶1) at 80 ℃/2 h, 95 ℃/1 h, 110 ℃/0.5 h showed good swelling rate(>200%), percentage of gel fraction(>80%), efficacy, and safety. The results of differential scanning calorimetry(DSC) and X-ray diffraction(XRD) analyses showed that compared with the physical mixture group, the PVA diffraction peak at 2θ of 19.45° in the XRD pattern of hydrogel microneedles disappeared and glass transition temperature(Tg) was decreased from about 150 ℃ to 58 ℃, which confirmed that the polymers underwent esterification and were successfully crosslinked. This study provided references for transdermal drug delivery applications of PVA and PVM/MA or PMVE/MAH composite matrix hydrogel microneedles.

  • Zemei LIU, Yuanju LYU, Wenli WU, Guangyan ZHENG, Xin CHE
    Chinese Journal of Pharmaceuticals. 2023, 54(10): 1485-1492.

    In this study, an Astragalus-chitosan/poly(lactic acid)(PLA) nanofiber functional dressing for skin wound care was prepared using electrostatic spinning technology. The contents of Astragalus polysaccharide and Astragalus total saponin were determined by UV spectrophotometry, and the prepared nanofiber functional dressings were characterized by scanning electron microscopy, differential scanning calorimetry, Fourier transform infrared spectroscopy, and X-ray diffraction. The wettability, water vapor transmission rate, drug release property, and antibacterial ability of the nanofiber functional dressings were also evaluated. The results showed that the Astragalus components were exist in the Astragalus-chitosan/PLA nanofiber functional dressings in an amorphous state, and there was no apparent interaction between the components and excipients. The average diameter of the Astragalus-chitosan/PLA nanofibers was (328±118)nm, and the overall porosity of the functional dressing was 92.16%. The Astragalus-chitosan/PLA nanofiber functional dressings had moderate wettability, good air permeability, and a significant antibacterial effect on Escherichia coli and Staphylococcus aureus, provided a new research direction for novel wound care dressings.

  • Jianguo SHI, Yudan JIANG
    Chinese Journal of Pharmaceuticals. 2023, 54(10): 1493-1495.

    At present, the commonly used methods for testing the container close integrity in the production of injections include high-voltage leak detection method and microbial challenge method. In this study, the method sensitivity was taken as the index to compare the applicability of high-voltage leak detection method and microbial challenge method. The results showed that the sensitivity of the high-voltage leak detection was 0.1 μm(pore size), and that of the microbial challenge method was 10 μm(pore size), indicating that the sensitivity of the high-voltage leak detection was better than the microbial challenge method for injection ampoule packaging. The high-voltage leak detection could better meet the requirements of container close integrity test of injection, and could realize on-line inspection to ensure the quality of injection.

  • Ye CHEN, Xinyue LIU, Jinxi DING
    Chinese Journal of Pharmaceuticals. 2023, 54(10): 1496-1503.
  • Jinping XIE, Rong SHAO
    Chinese Journal of Pharmaceuticals. 2023, 54(10): 1504-1509.
  • Ruoxi YAN
    Chinese Journal of Pharmaceuticals. 2023, 54(10): 1510-1516.
  • Jianlong YUAN, Lingna ZHANG, Qingyu CHEN, Rongzhen HUANG
    Chinese Journal of Pharmaceuticals. 2023, 54(10): 1517-1520.
  • Kangli YANG, Zhen CHEN
    Chinese Journal of Pharmaceuticals. 2023, 54(10): 1521-1526.
  • Jiawei YANG, Shengwei CHEN, Weike SU, Wenhao XU
    Chinese Journal of Pharmaceuticals. 2023, 54(9): 1283-1293.

    Lignin is a kind of natural aromatic biopolymer, which is usually composed of highly cross-linked aromatic ether unit structures through random polymerization. It is a widely distributed and high-yield biomass resource, inferior to cellulose and hemicellulose. It is expected to become an important and inexpensive source of aromatics, which is crucial for the pharmaceutical field. This paper reviews the current extraction methods, degradation technologies of lignin, and summarizes the applications of lignin and its degradation and modification products in the pharmaceutical field, so as to provide some references for the full utilization and functional application of lignin resources.

News