Home Archive
Archive
2022 Volume 53 Issue 6  Published: 2022-06-10
    Perspectives
  • Gangsheng CHEN , Heng GUO , Fuli ZHANG
    doi: 10.16522/j.cnki.cjph.2022.06.001

    The oral anti-COVID-19 agent, S-217622, developed by Shionogi & Co., Ltd., was proved to be well tolerated and effective for Omicron variant in phase Ⅱ clinical trial. And a phase Ⅲ clinical trial is currently underway. The synthesis of S-217622 consists of four fragments according to the retrosynthetic analysis method and the synthetic routes of each fragment and S-217622 are summarized in this paper.

  • Review
  • Yue YU , Xiaoyan QIU , Mingkang ZHONG
    doi: 10.16522/j.cnki.cjph.2022.06.002

    The SARS-CoV-2 infection has caused a serious public health threat globally with over 6 million deaths reported. Despite large-scale vaccination around the world, the infection rate remains high due to rapid mutations of the coronavirus, which warrants the development of novel therapeutic agents for the treatment of COVID-19. Treatment guidelines in both China and the U.S. have been updated on their recommendations regarding the recent authorizations of Paxlovid and bebtelovimab. This paper focuses on the four newly authorized agents, Paxlovid, molnupiravir, bebtelovimab, and amubarvimab/romlusevimab, for a review of their mechanisms, development progress, and clinical evidence. The characteristics and comparative use of the above agents are discussed to provide perspectives for current practice and future development.

  • Review
  • Yongqing HUANG , Ying YE , Liangliang ZHOU , Zhenhua CHEN
    doi: 10.16522/j.cnki.cjph.2022.06.003

    Mechanical dry particle coating is a kind of technology which can directly cover the surface of larger core(host) particles with fine shell(guest) particles and form composite particles with "ordered structure". The mechanical dry particle coating can avoid the use of organic solvents or water, reduce the cost of drying process and the pollutions caused by organic solvents. In pharmaceutical research, it is mainly used to improve the powder flowability, prepare sustained- and controlled-release micropowders and achieve the purpose of taste-masking. The coating efficiency of mechanical dry particle coating is mainly affected by the properties of fine powders(such as Young's modulus, particle size) and process parameters(such as the type of instrument, rotating speed, and processing time). This paper reviews the applications of mechanical dry particle coating in pharmaceutics and its influencing factors.

  • Review
  • Hongxing LIU , Feng ZHAO , Yinling MA , Yichen WANG , Deying CAO
    doi: 10.16522/j.cnki.cjph.2022.06.004

    Electrospray is a new technology for preparing drug-loaded polyester microspheres with controllable size. It has attracted interest from researchers for the advantages of protecting bioactivities of sensitive molecules such as proteins, cells, growth factors, viruses and genes by the microspheres. In this paper, the basic principle of electrospray method is introduced, and its research progress in the preparation of drug-loaded microspheres in recent years is reviewed to provide some references for the application in bioengineering and drug delivery, development of electrospray products, and the realization of mass production.

  • Review
  • Yi JIN , Mingzhu SU , Jing GUO , Songwei LYU , Zhiqiang CAI
    doi: 10.16522/j.cnki.cjph.2022.06.005

    Liposomes are vesicles with a phospholipid bilayer structure capable of loading a wide range of drugs and offer unique advantages in targeted tumor drug delivery. However, they face significant challenges in controllable preparation and targeting efficiency. This review focuses on the preparation of liposomes by microfluidic hydrodynamic focusing techniques, introducing different types of microfluidic chips, and the influences of relevant process parameters on liposome properties. Further, different delivery strategies of liposomes for targeting breast cancer are highlighted to provide an advanced preparation technique and novel targeting strategy for liposome research.

  • Review
  • Dawei ZHANG , Geng TIAN , Haoshu XIONG , Shunnan ZHANG , Kaijing YAN
    doi: 10.16522/j.cnki.cjph.2022.06.006

    Fluidized bed granulation is one of the wet granulation technologies for pharmaceutical enterprises to produce solid dosage forms. Since U.S. Food and Drug Administration(FDA) advocated the use of process analysis technology(PAT), PAT has been widely used for real-time analysis, monitoring and control of fluidized bed granulation process. The process detection technology and data analysis method based on fluidized bed granulation are mainly introduced in this paper. The process detection technology mainly includes near-infrared spectroscopy, acoustic emission, spatial filtering and microwave resonance. The data analysis methods are mainly divided into spectral data processing method, linear and non-linear algorithm and process real-time data analysis method. And the applications of PAT in fluidized bed granulation in recent years are reviewed, mainly including endpoint judgment, real-time analysis and detection of production process and anomaly monitoring, which provides a basis for selecting appropriate PAT technology for fluidized bed granulation process.

  • Review
  • Weinan GU , Yang TIAN , Ziming ZHAO , Hui ZHANG , Aiping ZHENG
    doi: 10.16522/j.cnki.cjph.2022.06.007

    Poly(lactide-co-glycolide)(PLGA) is a widely used biodegradable medical and pharmaceutical material with high added value because of its excellent sustained-release performance and biocompatibility. The conventional quality standard evaluation system of PLGA only involves spectrum comparison and general inspection, which cannot distinguish the differences between different types of PLGA well. Starting with the synthesis of PLGA, this paper summarizes the research progress in characterization methods of PLGA worldwide, and looks forward to providing literature support for the characterization, preparation and application of PLGA in domestic high-end preparations.

  • Paper
  • Lei TIAN , Jiehai LIAO , Jun CHENG , Yulei CAI , Jiewei PENG
    doi: 10.16522/j.cnki.cjph.2022.06.008

    The classic synthetic route of selegiline hydrochloride uses amphetamine or(–)-(R)-methamphetamine, which are classified as controlled substances, as the starting material, so it is difficult for enterprises to obtain the production license. Most of the new synthetic methods reported in recent years involved some dangerous operations such as azide and Grignard reactions, with low yields and high cost. In this study, selegiline hydrochloride was synthesized from the chiral pool compound N, N-dimethyl-(S)-2-benzyl-aziridine-1-sulfonamide(the intermediate of cobicistat) via ring-opening reaction, condensation, deprotection and reductive amination. The reaction conditions of this process were mild, the post-processing only needed simple operations such as recrystallization and salification, and didn't need column chromatographic separation. This process with a total yield of 29.4% was more suitable for industrial production.

  • Paper
  • Wenyan YANG , Jianlan CUI , Jun WANG , Xiaorong JING , Mengge LIU , Linxiu ZHAO
    doi: 10.16522/j.cnki.cjph.2022.06.009

    2-Nitro-4-chlorophenol(3) was obtained from p-chlorophenol(2) by nitration with nitric acid. Compound 3 was reduced to 2-amino-4-chlorophenol(4) in the presence of thiourea dioxide. After adjusted to pH 3 by adding 20% sulfuric acid, chlorzoxazone(1) was obtained by cyclization of 4 and urea. The total yield was about 76% and the purity was 99.81%. When adding acetic acid as solvent, 3 could be evenly dispersed and precipitated in the system, so the nitration was complete, and the reaction time was shortened to 1 h. The reduction and cyclization were carried out continuously without oxidation of intermediate 4 in the isolation prcess. The reduction used thiourea dioxide instead of traditional sodium sulfide or hydrazine hydrate, which was green and environmental friendly. Sulfuric acid was used to replace hydrochloric acid in cyclization to avoid the influence of volatilization of hydrochloric acid on the experimental operations, and the reaction time was also shortened. The improved process had mild conditions and simple post-processing steps.

  • Paper
  • Wenhao PENG
    doi: 10.16522/j.cnki.cjph.2022.06.010

    Azilsartan methyl ester was synthesized from methyl 1-[(2'-cyano-[1,1'-biphenyl]-4-yl)methyl]-2-ethoxy-1H-benzo[d]imidazole-7-carboxylate in autoclave with ammonium carbonate at 90 - 105 ℃, then hydrolyzed with sodium hydroxide solution and recrystallized with methanol to obtain azilsartan, an antihypertensive drug. The overall yield was 69.3% and the purity was 99.5%.

  • Paper
  • Qianqian LIU , Yuanjie WU , Zhengyu ZHANG , Shaoxin CHEN
    doi: 10.16522/j.cnki.cjph.2022.06.011

    Ascomycin(FK520) is a macrolides antibiotic produced by Streptomyces hygroscopicus. It has a variety of biological activities and with a high application value. In order to realize the large-scale fermentation production of FK520, in this study, the high-yielding mutation strain SFK-OASN-N3-25(2.92 g/L) was obtained from SFK-6-33(2.43 g/L) through natural isolation, mutation breeding, and genetic modification, and the yield was 20.16% higher than that of the original strain. Then the fed-batch culture was carried out in a 5 L fermenter to optimize the glycerol supplemental concentration and pH. It was determined that the optimal fed-batch culture conditions were as follows: glycerol supplemental concentration was 2.5%, and the pH was controlled above 5.6. In the optimized fermentation process, the yield of FK520 reached 4.64 g/L, which is the highest yield reported at present. Finally, the fermentation yields of FK520 were 4.66 - 4.97 g/L through three batches of fermentation verification, which laid a foundation for large-scale fermentation of FK520.

  • Paper
  • Huiping SUN , Kai XU , Guoxi ZHANG , Wenzhong CHEN , Guang CHENG
    doi: 10.16522/j.cnki.cjph.2022.06.012

    G3139(1), an antisense oligonucleotide, can downregulate the expression of B-cell lymphoma-2(Bcl-2) protein and mRNA expression so as to promote the apoptosis of tumor cells. In this study, 1 was encapsulated in the cationic lipid nanoparticles by a two-step hybrid method within microfluidic devices to enhance the uptake of 1 in human large cell lung cancer cell line(NCI-H460), and the in vivo stability of the cationic lipid nanoparticles was enhanced by incorporating of the PEGylation lipid. The long-circulating cationic lipid nanoparticles loaded with 1(GLNPs) exhibited the averaged size of (89.6±3.2)nm and ζ potential of (20.9±2.4) mV. The results of agarose gel electrophoresis and the calculated encapsulation efficiency[(93.6±2.5)%] showed that 1 was successfully encapsulated by the lipid nanoparticles. The cytotoxicity and cellular uptake of GLNPs were significantly higher than those of the free 1. In the NCI-H460 tumor-bearing nude mouse models, GLNPs inhibited a more significant inhibitory effect on tumor growth, compared with the free 1. Moreover, the tumor inhibitory rate of the combinational group of GLNPs and paclitaxel injection was(73.1±10.3)%, which was significantly higher than that of other single or combined administration groups. In pharmacodynamics test, there was no significant difference in the body weight of tumor-bearing nude mouse in each group, suggesting the low toxicity of this product. In conclusion, GLNPs prepared by this two-step hybrid method could be a promising nucleic acid delivery system in clinical application.

  • Paper
  • Bin NI , Chang GAO , Chunyun FANG , Yan LI , Chunyu GUO
    doi: 10.16522/j.cnki.cjph.2022.06.013

    The liposomes loaded with total flavones of Artemisia capillaris Thunb. were prepared by ethanol injection method, and N-trimethyl chitosan with positive charge was used to coat on the liposomes. Then, lyophilization was adopted to enhance the storage stability of the prepared liposomes. The results of single factor tests showed that lyophilized liposomes with good appearance and reconstitution profiles were obtained by using 6% of trehalose as a lyoprotectant. The encapsulation efficiency, particle size, polydispersity index(PDI) and ζ potential of the liposomes before and after lyophilization were (91.8±0.5)% and (92.5±0.3)%, (164.0±4.2) and (165.5±5.9)nm, 0.255±0.007 and 0.361±0.030, (23.8±0.2) and (21.6±0.4)mV, respectively. Under the transmission electron microscope, the reconstituted liposomes were spherical in shape. Furthermore, the liver protection effect of the liposomes was investigated with carbon tetrachloride-induced acute liver injury in murine models. Compared with model group, the levels of alanine aminotransferase(ALT), glutamic-oxaloacetic transaminase(AST) in serum and malonaldehyde in liver tissue of the liposomes treated group were significantly reduced, which demonstrated the title liposomes had a remarkable protective effect on acute hepatic injury in mice. This study can provide a new idea for the oral delivery of traditional Chinese medicine components with low solubility.

  • Paper
  • Hui GUO , Mingjin XUN , Zhong FENG , Guimin ZHANG , Qingyan CUI
    doi: 10.16522/j.cnki.cjph.2022.06.014

    The carbidopa levodopa sustained-release tablets were prepared, which contained a combination of microcrystalline cellulose(MCC), hydroxypropyl methyl cellulose(HPMC) and hydroxypropyl cellulose(HPC) instead of the key excipient, poly(vinyl acetate-co-crotonic acid), in the original preparation(Sinemet®). The amounts of MCC, HPMC and HPC were optimized with the release data of carbidopa and levodopa from the sustained-release tablets in 0.1 mol/L hydrochloric acid. The results showed that the release behaviors of carbidopa and levodopa from the self-made sustained-release tablets with 8% of MCC, 1.6% of HPMC and 6% of HPC and the original preparation were similar. Moreover, this preparation process was robust and had low inter-batch variability. 1-Methyl-4-phenyl-1,2,3,6-tetrahydropyridine-induced mouse model of Parkinson disease(PD) was established to evaluate the pharmacodynamics. The results showed that there were significant differences in scores of mice swimming and suspension tests, and dopamine level between the model group and the self-made sustained-release tablets, suggesting that the self-made tablets had a potential therapeutic effect for PD.

  • Paper
  • Mengtao ZHAO , Renyu FAN , Kangming ZHOU , Huimin SUN , Chuanyun DAI
    doi: 10.16522/j.cnki.cjph.2022.06.015

    To address the problem of difficulty in obtaining discrete element parameters for micron-sized pharmaceutical excipient pregelatinized starch, the radius of pregelatinized starch was scaled up to 1 mm according to the dimensional theory, then the optimal values of discrete element parameters that significantly affected the angle of repose determined by lifting cylinder method were obtained by applying Plackett-Burman design, steepest climb experiment and Box-Behnken design. On this basis, the reasons for the differences in angle of repose result of the same material caused by different lifting speeds were revealed from the perspective of force chain. The results showed that the optimum values of the significant discrete element parameters were as follows: 0.503 for the pregelatinized starch-pregelatinized starch static friction coefficient, 0.276 for the pregelatinized starch-pregelatinized starch rolling friction coefficient, 0.256 for the pregelatinized starch-stainless steel rolling friction coefficient, and the relative error between simulated and measured results for angle of repose was 0.88%. Lifting speed mainly affected the number, rate of change and size of the force chain in the lifting stage. Lower lifting speed eventually formed a larger number of force chains, larger inter-particle forces and larger angles. The simulation results were basically not different from the real experiment results, indicating that the parameters obtained by calibration were accurate and provided a reference for the selection of discrete element parameters of micron-sized pharmaceutical excipient pregelatinized starch. The force chain analysis revealed the force distribution pattern and provided a theoretical basis for the simulation of mixing, transferring and tabletting of solid formulations in the pharmaceutical process.

  • Paper
  • Huixia CHAI , Haifeng ZHANG , Duanfang SHAO , Li QUAN , Xiaodai CUI , Rong LIU
    doi: 10.16522/j.cnki.cjph.2022.06.016

    An ultra-high performance liquid chromatography-tandem mass spectrometry(UPLC-MS/MS) method was established for the determination of busulfan(1) in plasma from pediatric patients. The ACQITY UPLC®HSS T3 column(2.1 mm×50 mm, 1.8 μm) was used, and the multiple reaction monitoring mode was adopted with the electrospray ion source for positive ion segmental scanning analysis. The results showed that it was linear for 1 in the range of 20 - 3 000 ng/ml, and the quantification limit of the method was 5 ng/ml. The intra- and inter-day precisions were below 5%. The average extraction recoveries were 90% - 110%, and the residual effect was 0.01%. The concentration of 1 decreased by 22% after storage at room temperature for 24 h, indicating that the plasma sample was unstable under this condition. While under the other storage conditions(4, –20 and–80 ℃), the concentrations of 1 were basically unchanged within one week. The established method required a small amount of plasma sample, and even 1 μl of plasma could be used for detection. This method was fast, accurate and reliable, which provided a reference for pediatric therapy and pharmacokinetic studies of 1.

  • Paper
  • Xian YANG , Fanghong ZHAO , Haiting HOU
    doi: 10.16522/j.cnki.cjph.2022.06.017

    A high-performance liquid chromatography-tandem mass spectrometry(LC-MS/MS) method was established for the determination of terbutaline sulfate(1) in the respiratory tract tissues of rats, and the distribution of 1 as well as the dynamic changes in vivo in tracheobronchial and lung tissues after inhalation administration was investigated. The Eclipse XDB-C8 column(4.6 mm×150 mm, 5 μm) was used, with the electrospray ionization(ESI) and multiple response monitoring(MRM) mode. The results showed that it was linear for 1 in the ranges of 10.1 - 10 100 ng/g(tracheobronchial tissue) and 5 - 5 000 ng/g(lung tissue), and the limits of quantification were 10.1 and 5 ng/g, respectively. The intra-day precision(n=6) of 1 in rat tracheobronchial and lung tissues were all less than 4%, which met the requirements of quantitative analysis of biological samples. After inhalation administration to rats, 1 showed a similar dynamic change process in rat tracheobronchial and lung tissues, and the maximum concentration reached after administration, followed by rapid elimination. A higher concentration of 1 was found in tracheobronchial tissue, indicating its distribution was higher than that in lung tissue. The established LC-MS/MS method was fast, convenient and accurate, which provided a reference for the clinical rational drug use of 1 aerosol inhalation solution.

  • Paper
  • Yuanhua ZHOU , Liwen ZHANG , Shunling DONG
    doi: 10.16522/j.cnki.cjph.2022.06.018

    A normal phase HPLC method was established for the determination of all-trans vitamin A palmitate(2) and vitamin D2(3) in vitamin AD micropellets(1), and the pretreatment only required one-step extraction with n-hexane. A Phenomenex Luna NH2 100A column(4.6 mm×250 mm, 3 μm) was used, with the mobile phase of n-hexane, and the detection wavelength was 265 nm. The results showed that it was linear for all-trans 2 and 3 in the ranges of 329.4 - 1 647.1 and 19.23 - 192.3 IU/ml, respectively. The repeatability RSDs of all-trans 2 and 3(n=6) were 0.6% and 0.5%, and the detection limits were 0.015 and 0.28 IU/ml, respectively. The mean recoveries(n=9) of all-trans 2 and 3 were 100.7% and 99.3%, with the RSDs of 1.9% and 0.9%, respectively. The extraction method could completely extract all-trans 2 and 3 from 1 in one-step, and the determination method could accurately determine the contents of all-trans 2 and 3 with high specificity and sensitivity, which provided a reference for the quality control of 1.

  • Paper
  • Yaju ZHOU , Bin ZHANG , Jun XU , Weiyi LU , Rong CAI
    doi: 10.16522/j.cnki.cjph.2022.06.019

    An inductively coupled plasma-optical emission spectrometry(ICP-OES) method was established to determine the extraction amounts of aluminum, boron and silicon elements in glass containers for human albumin(1) packaging, and two media(3% sodium citrate solution and 0.9% potassium chloride solution) were used for simulated extraction. The accelerated stability test was carried out for eleven batches of 1 sample, and the changes of aluminum residues in the samples were investigated when they were placed for 0, 1, 3, and 6 months. And the influences of extractable elements of aluminum, boron and silicon in glass containers on the residual amount of aluminum in 1 were investigated after being placed for six months. The results showed that the established method was simple, feasible, accurate and reliable. The two extraction solutions could extract aluminum, boron and silicon elements, and more extractable amounts were detected in 3% sodium citrate solution. During the accelerated storage of 1, the residual aluminum content increased gradually with the increased time. And there was a certain correlation between the extractable elements in the glass container for 1 packaging and the aluminum residue in 1 sample, which provided reliable data support for the quality supervision of the glass containers for 1 packaging.

  • Paper
  • Jianhe SUN , Honghua LU , Jipeng HOU , Guizhou HAO , Guimin ZHANG
    doi: 10.16522/j.cnki.cjph.2022.06.020

    A gas chromatographic method was established for determination of the structural alerts, the unsaturated ketones mesityl oxide(2) and phorone(3), in prasugrel hydrochloride(1). The DB-624 capillary column(30 m×0.53 mm×3.0 μm) was used with temperature programming, and the direct injection method was used for the determination. The results showed that it was linear for 2 and 3 in the range of 5 - 30 μg/ml, the average recoveries(n=9) of 2 and 3 were 101.25% and 102.23%, with the RSDs of 0.66% and 0.79%, respectively. The limits of quantification of 2 and 3 were respectively 2.77 and 2.89 μg/ml, and the limits of detection were respectively 1.11 and 1.16 μg/ml. The established method has strong specificity, high sensitivity and good durability, which can be used for the determination of 2 and 3 in 1.

  • Pharmaceutical Management & Information
  • Yuanyuan GE , Hui CAO , Yanchen HU , Yamin WANG , Di HU
    doi: 10.16522/j.cnki.cjph.2022.06.021
  • Pharmaceutical Management & Information
  • Yuan LI , Guangxing MENG
    doi: 10.16522/j.cnki.cjph.2022.06.022
News