PDF
Full
Outline
The aim of this study is to prepare acetaminophen sustained-release tablets by hot melt extrusion 3D printing technology based on the concept of "Quality by Design" (QbD). Firstly, the failure mode and effect analysis (FMEA) was used to determine the critical process parameters (CPPs), then full-factor experimental design was used to analyze the critical quality attributes (CQAs) and to establish the design space. The results showed that the content of plasticizer, the path spacing and the shell numbers are independent variable for the experimental design. The design space was concluded to be plasticizer content:9%, and the shell number:3-5, the path spacing:1.05-1.2 mm. In this study, 3D printing technology was used to prepare acetaminophen sustained-release tablets in accordance with the concept of QbD, which improved the durability of the process and ensured the uniform and controllable quality of the preparation and also provided experimental basis for personalised medicine.
PDF
108
37
| 科 Family | 属数 Number of genus | 种数 Number of species | 占总种数比例 Percentage of total species (%) | 属 Genus | 种数 Number of species | 占总种数比例 Percentage of total species (%) |
|---|---|---|---|---|---|---|
| 鹅膏菌科Amanitaceae | 2 | 11 | 5.26 | 鹅膏菌属 Amanita | 10 | 4.78 |
| 小菇科 Mycenaceae | 2 | 12 | 5.74 | 丝盖伞属 Inocybe | 5 | 2.39 |
| 多孔菌科 Polyporaceae | 8 | 14 | 6.70 | 蜡蘑属 Laccaria | 5 | 2.39 |
| 红菇科 Russulaceae | 3 | 23 | 11.00 | 小皮伞属 Marasmius | 6 | 2.87 |
| 小菇属 Mycena | 11 | 5.26 | ||||
| 光柄菇属 Pluteus | 5 | 2.39 | ||||
| 红菇属 Russula | 17 | 8.13 | ||||
| 栓菌属 Trametes | 5 | 2.39 |
关闭全屏
No. 86 Xueyuan South Road, Haidian District, Beijing
010-62199257
qkjq@cast.org.cn
Copyright © 2025 China Association for Science and Technology. All rights reserved. For all open access content, the relevant licensing terms apply.
Sponsored by the Office of the Leading Group for Cybersecurity and Informatization of CAST, and supported by Science and Technology Review Publishing House
