收藏切换
Research on determination and stability of 10 biogenic amines in osteopeptide injections based on HPLC-MS/MS with pre-column derivatization*
收藏切换
PDF
Xin-li LIN1, 2, Chang WU3, Li TAN2, Chang-hong MENG2, Yi-hong LU2, 3, Yu-xin WANG2, **, Qing-shui SHI2, **
Chinese Journal of Pharmaceutical Analysis | 2024, 44(3) : 405 - 418
Less
收藏切换
Chinese Journal of Pharmaceutical Analysis | 2024, 44(3): 405-418
Ingredient Analys
Research on determination and stability of 10 biogenic amines in osteopeptide injections based on HPLC-MS/MS with pre-column derivatization*
Full
Xin-li LIN1, 2, Chang WU3, Li TAN2, Chang-hong MENG2, Yi-hong LU2, 3, Yu-xin WANG2, **, Qing-shui SHI2, **
Affiliations
  • 1.Department of Pharmaceutical Analysis,China Pharmaceutical University,Nanjing 211198,China
  • 2.Key Laboratory for Impurity Profile of Chemical Drugs,National Medical Products Administration,Jiangsu Institute for Food and Drug Control,Nanjing 210019,China
  • 3.Department of Pharmaceutical Analysis,Xuzhou Medical University,Xuzhou 221004,China
Published: 2024-03-31 doi: 10.16155/j.0254-1793.2024.03.05
Outline
收藏切换
Objective:

To establish a pre-column derivatization high performance liquid chromatography-mass spectrometry to determine biogenic amines in osteopeptide injections and determine the changes of biogenic amines after the stability influence factor test and accelerated test.

Methods:

The osteopeptide injections were separated by a ZORBAX SB-C18 chromatographic column and gradient elution after derivatization by dansyl chloride. Ten kinds of biogenic amines was determined by mass spectrometry with electrospray ion source and multiple reaction monitoring in positive mode. The osteopeptide injections were placed under high temperature,strong light and accelerated experimental conditions to inspect the stability of biogenic amines.

Results:

Method validation showed that the linear relationship of 10 biological amines was good,and the correlation coefficients were higher than 0.990. The detection limits were 0.01-0.10 ng·mL-1,the quantitation limits were 0.05-0.30 ng·mL-1. Good accuracy,repeatability and durability were obtained. Under different conditions,the changes of biogenic amines in osteopeptide injections were significant. The accumulation of putrescine increased under high temperature,while spermine and spermidine decreased. The biogenic amines were unstable under strong light and accelerated test.

Conclusion:

Method validation shows that the method can be applicable to simultaneous determine 10 biogenic amines in osteopeptide injections. It provided a reference to establish and improve the quality standards of biogenic amines in osteopeptide and other drugs. In addition,the research of the stability of biological amines shows that high temperature and strong light will affect the stability of biogenic amines. Therefore,quality control and supervision should be strengthened during drug production and storage to ensure the stability of drug.

osteopeptide injections  /  biogenic amine  /  pre-column derivatization  /  liquid chromatography- mass spectrometry  /  stability
Xin-li LIN, Chang WU, Li TAN, Chang-hong MENG, Yi-hong LU, Yu-xin WANG, Qing-shui SHI. Research on determination and stability of 10 biogenic amines in osteopeptide injections based on HPLC-MS/MS with pre-column derivatization*[J]. Chinese Journal of Pharmaceutical Analysis, 2024 , 44 (3) : 405 -418 . DOI: 10.16155/j.0254-1793.2024.03.05
Year 2024 volume 44 Issue 3
PDF
79
38
Cite this Article
BibTeX
Article Info
doi: 10.16155/j.0254-1793.2024.03.05
  • Receive Date:2023-04-20
  • Online Date:2026-03-13
  • Published:2024-03-31
Article Data
Affiliations
History
  • Received:2023-04-20
Funding
Affiliations
    1.Department of Pharmaceutical Analysis,China Pharmaceutical University,Nanjing 211198,China
    2.Key Laboratory for Impurity Profile of Chemical Drugs,National Medical Products Administration,Jiangsu Institute for Food and Drug Control,Nanjing 210019,China
    3.Department of Pharmaceutical Analysis,Xuzhou Medical University,Xuzhou 221004,China
References
Share
https://castjournals.cast.org.cn/joweb/ywfxzz/EN/10.16155/j.0254-1793.2024.03.05
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT