收藏切换
Cause Analysis on Cracking of Beam Steel 610L during Stamping
收藏切换
Feng Gao, Li Liu, Sha-sha Kou, Wen-ya Li
Rare Earth Steel | 2018, 44(3) : 54 - 57
Less
收藏切换
Rare Earth Steel | 2018, 44(3): 54-57
• Quality of Variety and Experiment and Research •
Cause Analysis on Cracking of Beam Steel 610L during Stamping
Full
Feng Gao, Li Liu, Sha-sha Kou, Wen-ya Li
Affiliations
  • Technical Center of Inner Mongolia Baotou Steel Union Co., Ltd., Baotou 014010, Inner Mongolia Autonomous Region, China
Published: 2018-06-25 doi: 10.13647/j.cnki.btgkj.2018.03.014
Outline
收藏切换

In the paper, the cause for lamellar cracking of beam steel during stamping and shearing is introduced. It was found out that there was serious pearlite segregation band in the center of cracked specimen through such detection analysis of metallographic examination and scanning electron microscope. Moreover, there were sulfide inclusion and more hard bulk precipitate associated, the main chemical components of which were such as C, N, Nb and Ti, obtained by scanning electron microscopy and energy dispersive spectrum analysis. The serious pearlite segregation band and the bulky hard precipitate in it have worsened the whole performances of the matrix, so there is lamellar cracking in the center of shearing plane during stamping and shearing.

beam steel 610L  /  lamellar cracking  /  pearlite segregation band
高峰, 刘莉, 寇沙沙, 李文亚. 汽车用大梁钢610L冲压开裂原因分析. 包钢科技, 2018 , 44 (3) : 54 -57 . DOI: 10.13647/j.cnki.btgkj.2018.03.014
Feng Gao, Li Liu, Sha-sha Kou, Wen-ya Li. Cause Analysis on Cracking of Beam Steel 610L during Stamping[J]. Science & Technology of Baotou Steel, 2018 , 44 (3) : 54 -57 . DOI: 10.13647/j.cnki.btgkj.2018.03.014
Year 2018 volume 44 Issue 3
69
10
Cite this Article
BibTeX
Article Info
doi: 10.13647/j.cnki.btgkj.2018.03.014
  • Receive Date:2018-02-11
  • Online Date:2026-10-20
  • Published:2018-06-25
Article Data
Affiliations
History
  • Received:2018-02-11
Affiliations
    Technical Center of Inner Mongolia Baotou Steel Union Co., Ltd., Baotou 014010, Inner Mongolia Autonomous Region, China
References
Share
https://castjournals.cast.org.cn/joweb/xtg/EN/10.13647/j.cnki.btgkj.2018.03.014
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT