Home Latest Articles
Latest Articles
  • Hongbo CHEN, Yuman JIANG, Jiakai LI, Xin TANG, Chong CAO, Longxin QIU
    Journal of Northwest A&F University (Natural Science Edition). 2026, 54(3): 133-142.
    Objective

    The study aims to investigate the mechanism of quercetin in inhibiting porcine reproductive and respiratory syndrome virus (PRRSV)-induced inflammation.

    Method

    Twenty-eightday-old piglets were randomly divided into four groups: PRRSV group, PRRSV+low-dose quercetin (12.5 mg/kg basal diet), PRRSV+medium-dose quercetin (25 mg/kg basal diet), and PRRSV+high-dose quercetin (50 mg/kg basal diet). A blank control group was also established. Serum samples were collected at 7, 14, and 35 days after infection to determine serum inflammatory factors in each group. Pig lungs were collected to detect tissue lesions after 35 days of infection. The metabolic profiles of pig serum were analyzed, and the differential metabolites and related metabolic pathways were identified. A “ingredient-target-pathway-disease” diagram of inflammation for quercetin treatment was constructed by network pharmacology. The molecular docking method was used to verify the interaction between the active ingredients and the core targets. Serum metabolomics and network pharmacology were combined to construct a “target-metabolic pathway-metabolite” network diagram. The expression of key regulatory targets phospholipase A2 (PLA2), cyclooxygenase (COX), and lipoxygenase (LOX) mRNA was detected.

    Result

    Compared with the blank control group, piglets in the PRRSV group exhibited significant or extremely significant increases (P<0.05 or P<0.01) in serum inflammatory cytokines and pulmonary inflammatory cytokine mRNA from 7 to 35 days post-infection. In contrast, quercetin treatments at different concentrations significantly suppressed (P<0.05 or P<0.01) the expression levels of serum inflammatory cytokines, pulmonary inflammatory cytokine mRNA, and PRRSV N gene compared to the PRRSV group. Histopathological analysis revealed that quercetin alleviated PRRSV-induced interstitial pneumonia. Through metabolomics techniques, five key metabolic pathways (glyceryl ester metabolism, ether lipid metabolism, glycerophospholipid metabolism, tyrosine metabolism, and arachidonic acid metabolism) and 16 differential metabolites in serum were identified. Compared with the PRRSV group, quercetin was able to reverse the levels of these differential metabolites. Network pharmacology analysis showed that quercetin mainly acted on target proteins such as EGFR, MMP9, PTGS2, CDK2, and APP in interstitial pneumonia treatment, which were closely linked to metabolic pathways, PI3K-Akt signaling pathways, IL-17 signaling pathways, and T cell receptor signaling pathways. Integrated analysis demonstrated glycerophospholipid metabolism and arachidonic acid metabolism as key metabolic pathways for quercetin treatment of interstitial pneumonia. The integrated verification results confirmed that the pulmonary mRNA expression levels of PLA2, COX1 and LOX in the quercetin groups were mostly significantly or extremely significantly reduced (P< 0.05 or P<0.01) compared with the PRRSV group.

    Conclusion

    Quercetin can regulate serum metabolites and inflammation-related core targets through glycerophospholipid metabolism and arachidonic acid metabolism pathways, reduce inflammation levels, alleviate metabolic disorders, and play a therapeutic role in interstitial pneumonia.

  • Na LI, Hong TANG, Chongjian YANG
    Journal of Northwest A&F University (Natural Science Edition). 2026, 54(3): 143-152.
    Objective

    This research aimed to analyze the spatial-temporal evolution characteristics and driving factors of urban green space patterns in the arid regions of Northwest China, to provide references for the optimization and management of green spaces, as well as their sustainable maintenance and healthy development in this region.

    Method

    With Lanzhou City as an example, the city's space was divided into two categories: green space and non-green space. Based on the land use data of the city in 2000, 2010 and 2020 and the Lanzhou Statistical Yearbook, the evolution characteristics of the green space pattern in Lanzhou City from 2000 to 2020 were analyzed. With the green space area of Lanzhou City as the dependent variable, and natural factors (elevation, slope, aspect) and socio-economic factors (population density, regional gross domestic product, value of primary industry, value of the secondary industry and value of the tertiary industry) as independent variables, the factor detector was used to analyze the main driving factors influencing the change of green space in Lanzhou City.

    Result

    From 2000 to 2020, the area of green space in Lanzhou City showed a decreasing trend and presented obviously different characteristics in different phases. From 2000 to 2010, the area of green space decreased by 1.14 km2, with the proportion of green space area in the total area dropping by 0.11%, and the land use dynamic degree was -0.01%. From 2010 to 2020, the area of green space decreased by 103.67 km2, with the proportion of green space area in the total area dropping by 9.91%, and the dynamic rate was -1.14%. From 2000 to 2020, 106.99 km2 of green space in Lanzhou City were converted to non-green space, while 2.22 km2 of non-green space were transformed into green space. From 2000 to 2020, the landscape pattern indices of green space and various land use types in Lanzhou City had undergone significant changes. Over time, landscape patch number, patch density and landscape shape index of green space in Lanzhou City all decreased, while the contagion index first increased and then decreased, and Shannon diversity index and Shannon evenness index both first decreased and then increased. Factor detector analysis results showed that from 2000 to 2020, both natural and socio-economic factors had a significant impact on the changes in green space in Lanzhou City. Among the socio-economic factors, population density, regional gross domestic product, value of primary industry, and value of the secondary industry were the main driving forces.

    Conclusion

    From 2000 to 2020, the green space in Lanzhou City was encroached upon by non-green space, leading to an intensified fragmentation of the green space landscape. Social and economic factors significantly influenced the changes in green space.

  • Dehua GAO, Yongjing YANG, Jing XIANG, Youzhu CAI, Lijuan ZHAO, Haishan HUANG, Dejun ZHANG
    Journal of Northwest A&F University (Natural Science Edition). 2026, 54(3): 153-161.
    Objective

    The study aims to investigate the effects of five different processing methods on the components, antioxidant activities, and hypoglycemic activities of Sibiraea laexigata (L.) Maxim (SLM).

    Method

    Taking SLM as the research object, four different factory processing combinations were applied, involving various fixation temperatures, rolling times, drying temperatures and durations, and scenting temperatures and durations. Measurements were conducted on both factory-processed and artisanal SLM samples for the following parameters: water content, ash content, protein content, tea polyphenol content, total flavonoid content, polysaccharide content, oleanolic acid content, ursolic acid content, caffeine content, and amino acid composition. The effects of different processing methods on SLM components and its in vitro antioxidant activities were analyzed through evaluation of the 2, 2'-azino-bis (3-ethylbenzothia-zoline-6-sulfonic acid) diammonium salt (ABTS) and 1, 1-diphenyl-2-picrylhydrazyl (DPPH) free radical scavenging abilities, total reducing power, and inhibition rates of α-amylase and α-glucosidase.

    Result

    Among the five processing methods for SLM, the process with fixation at 400 ℃, rolling for 30 minutes, drying at 250 ℃ for 18 minutes, and scenting at 80 ℃ for 10 minutes (Process 3) demonstrated the best amino acid retention and the highest total reducing power, with an OD value (700 nm) of 1.45±0.03. The hand-roasted tea (Process 5) treated with rehydration exhibited superior parameters. Its ABTS free radical scavenging ability was 78.62%±1.90%, DPPH free radical scavenging ability was 84.73%±0.23%, and inhibition rates of α-glucosidase and α-amylase were 62.15%±0.48% and 77.44%±1.91%, respectively, outperforming other SLM processing methods.

    Conclusion

    Significant impacts of processing methods were observed on the nutritional components and bioactivity of SLM. Optimal retention of amino acids was achieved by the processing method with fixation at 400 ℃, rolling for 30 minutes, drying at 250 ℃ for 18 minutes, and scenting at 80 ℃ for 10 minutes. Meanwhile, the hand-roasted tea treated with rehydration demonstrated the highest efficacy in antioxidant and hypoglycemic activities.

  • Wan YU, Shuai ZHANG, Xiaohui XIONG, Xiaowen CUI
    Journal of Northwest A&F University (Natural Science Edition). 2026, 54(3): 162-170.
    Objective

    This research aims to investigate the bactericidal effect and bactericidal mechanism of curcumin-mediated photodynamic bactericidal technology on Salmonella, to provide reference for the practical application of this bactericidal technology for promoting food microbiological safety.

    Method

    Single factor test was used to study the bactericidal effect of different illumination time and different curcumin concentration on Salmonella. The effect of curcumin-mediated photodynamic bactericidal technology on the morphology of Salmonella under different treatment durations was observed by scanning electron microscopy, the effect of curcumin-mediated photodynamic bactericidal technology on the apoptosis of Salmonella under different treatment durations was determined by propidium iodide staining, and the effect of curcumin-mediated photodynamic bactericidal technology on Salmonella cell membrane potential was determined by JC-1 staining.

    Result

    With the extension of the illumination time, the bactericidal effect of the curcumin-mediated photodynamic bactericidal technology was significantly improved. The total number of Salmonella colonies was only 102.670 CFU/mL when the illumination duration was 15 min. The bactericidal effect of curcumin-mediated photodynamic bactericidal technology on Salmonella did not increase consistently with the increase of curcumin concentration. When the curcumin concentration exceeded 20 μmol/L, no significant improvement in bactericidal effect was observed. With the prolongation of treatment time of curcumin-mediated photodynamic bactericidal technology, the scanning electron microscope observation results showed increasingly severe Salmonella cell surface collapse, crumpling, and content outflow. The propidium iodide staining results showed that the red fluorescence was gradually enhanced, indicating that the rate of apoptosis of Salmonella was gradually increased. The JC-1 staining results showed that the red fluorescence was gradually reduced, the green fluorescence was gradually enhanced, and the potential of Salmonella cell membrane was gradually decreased. The intracellular nucleic acid and protein leakage detection showed that the leakage of nucleic acid and protein in Salmonella gradually increased.

    Conclusion

    The curcumin-mediated photodynamic bactericidal technology had a better bactericidal effect on Salmonella when the illumination time was 15 min and the curcumin concentration was 20 μmol/L. This bactericidal technology caused the efflux of bacterial contents by changing the cellular morphology and destroying the integrity of the cellular membranes of Salmonella to achieve the bactericidal purpose.

  • Xin MAO, Shuaifei LI, Weiguo ZHANG, Dongming ZHANG, Ziheng ZHANG, Zeming WANG
    Journal of Northwest A&F University (Natural Science Edition). 2026, 54(3): 171-180.
    Objective

    The study aims to design an air-screen cleaning device for millet cleaning, enhancing the mechanization level of millet harvesting in China.

    Method

    Taking the woven sieve and perforated sieve as the research objects, the main material characteristics of threshed materials from ‘Longgu 31’ millet were determined. Fluent simulation analysis was used to simulate the flow field of the cleaning device with upper and lower sieves as woven sieve+woven sieve, perforated sieve+perforated sieve and woven sieve+perforated sieve, respectively. Wind speed on the vibrating screen surface with upper and lower sieves being woven sieves was measured using the self-made millet air-screen cleaning test bench. Taking the impurity rate of grains and the cleaning loss rate as the evaluation indices, a three-factor, five-level orthogonal test was conducted on the crank speed, fan speed and fan inclination angle, and a regression model was established. Subsequently, the multi-objective variable optimization method was utilized to optimize the regression model by Design-Expert 8.0.6, and the optimal structural parameter combination was determined. Finally, a bench verification test was carried out with the rounded optimal values of crank speed, fan speed and fan inclination angle.

    Result

    Fluent simulation analysis showed that when woven sieves were used for both upper and lower screens, airflow exhibited optimal penetration through the screens without vortex formation. The rear-section airflow maintained high velocity while being efficiently exhausted from the cleaning device. Bench test revealed that wind speed at a sieve-surface height of 90 mm was lower than that at 60 mm, which was conducive to the dispersion of the threshed materials. The wind speed at a sieve surface height of 60 mm was higher than that of 30 mm, promoting the separation of the threshed materials. The maximum wind speed on the screen surface was 4.22 m/s, which exceeded the residue suspension speed, making it sufficient to separate the light impurities from the millet grains. This validates the reliability of using weaving sieves for both the upper and lower screens. The multi-factor test demonstrated that the optimal operating parameters for the air-screen cleaning device were as follows: crank speed of 239.8 r/min, fan speed of 920.23 r/min, fan inclination angle of 25.98°, theoretical grain impurity rate of 2.89%, and cleaning loss rate of 1.78%. A bench verification test was carried out using the round values (crank speed 240 r/min, fan speed 920 r/min, and fan inclination angle 26°). The actual grain impurity rate was found to be 2.95%, and the cleaning loss rate was 1.81%.

    Conclusion

    The relative errors of grain impurity rate and cleaning loss rate between the bench verification test and the theoretical optimization results were 2.08% and 1.69%, respectively. Both errors were less than 5%, indicating that the designed air-sieve millet cleaning device had a reliable structure and met the operational requirements of millet cleaning operation.

  • Mingyue LÜ, Jilong MA, Tiena XIE, Binyuan YUN, Li JI, Jianjun MA, Hong LI, Xiang YUE, Jintao WANG, Biao JIA
    Journal of Northwest A&F University (Natural Science Edition). 2026, 54(2): 1-10.
    Objective

    This research aims to explore the differences in photosynthetic characteristics among different maize varieties in the Ningxia Yellow Irrigation District, and analyze the light response characteristics of maize during the critical reproductive period, to evaluate the regional applicability of maize varieties.

    Method

    With 7 maize varieties including YY238, TC19, XY1225, JD73, DK622, ZD958, and DH605 which are suitable for planting in Ningxia area as the materials, the Li-6400XT photosynthesis system was used to measure the photosynthetic characteristics of 7 main maize varieties under natural conditions during the nodulation period. The light response curves of the 7 maize varieties were fitted with 4 models, namely, the right-angle hyperbola model (RH), the non-right-angle hyperbola model (NRH), the exponential model (EM), and the modified model for the right-angle hyperbola (MRH), to derive the 5 photosynthetic characteristic parameters (Pn max, Rd, LCP, LSP, and AQY). The light response characteristics of maize varieties at the nodulation stage were compared, and the photosynthetic characteristics and leaf water use efficiency of maize varieties commonly used in Ningxia were analyzed.

    Result

    ①The net photosynthetic rates (Pn) of YY238, TC19 and XY1225 were 29.84, 29.61 and 28.99 μmol/(m2·s), respectively, which were higher than those of the other maize varieties, showing stronger photosynthetic performance. ② Compared with the RH, NRH and EM models, the photosynthetic parameters of different maize varieties fitted by the MRH model were the closest to the measured values, showing the highest degree of fit (0.983≤R2≤0.996, 0.886≤RMSE≤1.931, and 0.709≤MAE≤1.482), and it can be used as a commonly used maize light response curve model in Ningxia. ③ The photosynthetic characteristic parameter of the optimal light response curve was Pn max, which was 30.92, 29.96, 29.22, 28.79, 28.77, 26.95, and 28.34 μmol/(m2·s) for the 7 maize varieties respectively. It could serve as a main reference index for high light-efficiency maize variety screening. ④ According to the principal component analysis of 7 maize varieties based on five indicators, including Pn, Gs, Tr, Ci and WUE, the 7 varieties can be classified into three categories, namely, high light-efficiency varieties (YY238), medium-light-efficiency varieties with higher water-use efficiency (TC19, DK622, JD73, XY1225, and DH605), and high-water-use-efficiency varieties (ZD958).

    Conclusion

    By constructing the MRH model, calculating the corresponding photosynthetic characteristic parameters and combining them with the principal component analysis method, the photosynthetic characteristics and leaf water use efficiency of Ningxia maize varieties can be accurately analyzed. It can be used for regional suitability screening and photosynthetic capacity improvement of maize varieties in the Ningxia Yellow Irrigation District.

  • Liqiang DAI, Tianjiao LI, Yunhong QI, Xinling WANG, Jiaqi ZHANG, Yanying YAO, Wendi LÜ
    Journal of Northwest A&F University (Natural Science Edition). 2026, 54(2): 11-23.
    Objective

    This study identified key genes controlling somatic regeneration in maize to provide basis for analyzing the genetic mechanism of plant cell fate decision and for breaking the genotype dependence of somatic regeneration.

    Method

    Maize inbred line JK11 with strong regeneration capacity was selected as the plant material. Three traits related with somatic regeneration, embryogenic callus induction rate (EIR), green callus rate (GCR) and plant regeneration rate (PRR), were identified by tissue culture of its immature embryos. Meanwhile, RNA-seq technology was used to sequence the cultures at four different differentiation time points (0, 5, 10 and 15 d), and comparative transcriptome analyses were performed separately (JK0 vs JK5, JK0 vs JK10 and JK0 vs JK15). Common differentially expressed genes (DEGs) were screened for functional annotation.

    Result

    The mean values of EIR, GCR and PRR, reached 97.70%, 93.91% and 86.79%, respectively, for the inbred line JK11, indicating that this material had the potential to be used for genetic transformation. After transcriptome sequencing, a total of 98.27 Gb of clean data was obtained to form 12 libraries, with an average of 8.19 Gb per library. After comparative transcriptome analysis, 3 789 common DEGs were identified, which were divided into 6 coexpression modules. The enrichment analysis results showed that these genes were mainly involved in the pathways of photosynthesis, phenylpropanoid biosynthesis, starch and sucrose metabolism, and plant hormone signal transduction. Additionally, a hub node Zm00001d021784 and its six radiation nodes with the highest scores were identified by protein-protein interaction network analysis as the key candidate genes controlling this trait. qPCR was used for validation and the results showed that the predicted key candidate genes were reliable.

    Conclusion

    3 789 genes were screened as common DEGs for somatic regeneration, among which seven genes, including Zm00001d021784, were identified as key candidate genes.

  • Fucheng GUO, Ruili GOU, Yangmengfei SHE, Tinglu LIAO, Xinyi HAO, Chengke LUO
    Journal of Northwest A&F University (Natural Science Edition). 2026, 54(2): 24-32.
    Objective

    The study aims to analyze the differences in agronomic traits, physiological characteristics during the grain-filling period, and yield among different rice varieties (lines), to provide theoretical guidance for selecting salt-tolerant rice varieties (lines) that also exhibit high yield in the saline-alkali soils of Ningxia.

    Method

    The randomized regional experiment design was adopted. In saline-alkali soil of Ningxia, 16 different rice varieties (lines) were planted: SD-22, Chen 2, SD-26, Ningjing 48, HJW14, Xiangyou 108, Chen 1, Ningjing 56, Ningjing 52, Ningjing 50, Ningjing 57, 96D10, Ningjing 43, SD-18, 801, and Chen 3. And the yield, agronomic characteristics, photosynthetic characteristics and key enzyme activities of grain starch synthesis were comprehensively evaluated by means of variance analysis, correlation analysis and principal component analysis.

    Result

    Compared with the main Ningxia variety Ningjing 43, the yields of 96D10, Ningjing 52, SD-22 and HJW14 were increased significantly by 30.00%, 26.23%, 25.88% and 25.88%, respectively. The number of tillers and photosynthesis of 96D10, Ningjing 52, SD-22 and HJW14 were all increased, in which the number of tillers of 96D10 increased by 30.19% and the net photosynthetic rate (Pn) increased by 7.81%. The stomatal conductance (Gs) and transpiration rate (Tr) of 96D10, Ningjing 52, SD-22 and HJW14 were significantly increased by 18.55%-55.80% and 16.33%-63.27%, respectively. The grain soluble synthase (SSS) activity of HJW14 and Chen 2 were significantly increased by 54.52% and 20.87%, respectively. The correlation analysis revealed that rice yield was significantly positively correlated with tiller number, Pn, Gs, Tr and SSS activity. Further analysis revealed that the varieties (lines) with higher comprehensive scores, ranked from highest to lowest were: 96D10>Chen 2> HJW14>SD-22>Ningjing 52.

    Conclusion

    Based on the comprehensive score and yield, 96D10, Ningjing 52, SD-22 and HJW14 rice varieties can be regarded as excellent varieties (lines) for planting in saline-alkali land in Ningxia.

  • Haonan WU, Xuewen WANG, Jing HU, Zhongliang WU, Jianxun LIU, Yongbin LI, Shangbo YANG, Ruijie PAN, Ling GOU
    Journal of Northwest A&F University (Natural Science Edition). 2026, 54(2): 33-44.
    Objective

    Under the arid and semi-arid irrigation agricultural conditions in Xinjiang, drip irrigation planting under film was used to explore the effects of different soybean-maize composite planting patterns on maize morphological characteristics, photosynthetic characteristics, dry matter accumulation, yield of composite populations, and land-equivalent ratios. This research aims to clarify the suitable composite planting pattern and maize varieties with high yield in Xinjiang ecological agricultural area, to provide theoretical and technical support for the high-yield and high-efficiency cultivation of soybean-maize under intercropping, and to “increase the soybean yield, stabilize the maize yield”.

    Method

    A two-factor split plot experimental design was adopted. The main factor was composite intercropping patterns, and the secondary factor was maize varieties. The method of drip irrigation under film was used. In 2022, the main factor setting included two planting patterns, namely P1 pattern (intercropping 1∶4∶1) and P2 pattern (intercropping 2∶2∶2), and the secondary factor setting included three maize varieties. In 2023, the design was improved and optimized based on the design in 2022. The main factor setting included two planting patterns, namely P2 pattern and P3 pattern (intercropping 4∶2), and the secondary factor setting was the same as 2022. Using monoculture maize (M0) and monoculture soybean (B0) as control, the morphological characteristics, photosynthetic characteristics, dry matter accumulation and population yield of maize were measured.

    Result

    Soybean-maize intercropping showed significant advantages. It not only increased maize plant height, leaf area index, chlorophyll content, dry matter accumulation and net area yield, but also improved the utilization rate of land. Maize leaf area index and dry matter accumulation increased by 34.6% and 67.8% on average under the intercropping 2∶2∶2 pattern, which was suitable for the development of arid and semi-arid irrigation agricultural area in Xinjiang. The leaf area index, canopy leaf chlorophyll content and dry matter accumulation of Kenyu 4606 under the intercropping pattern were the highest, and the average increase was 10.4%, 5.9% and 10.8% compared with those of the other two varieties.

    Conclusion

    The intercropping 2∶2∶2 pattern shows obvious advantages and is a suitable composite intercropping pattern in spring maize irrigation agricultural areas in Xinjiang, which should be promoted and developed. Kenyu 4606 has high dry matter accumulation and yield, and is a suitable spring maize variety for soybean-maize composite intercropping.

  • Ming SU, Hua WANG, Ziqiang HONG, Fanguo LI, Tian ZHOU, Menghu WAN, Yueqi LI, Hongliang WU, Shibo ZHANG, Jianhong KANG
    Journal of Northwest A&F University (Natural Science Edition). 2026, 54(2): 45-55.
    Objective

    This research aims to explore the effects of reasonable application of nitrogen fertilizer on physiological characteristics, dry matter accumulation and yield of maize under high temperature stress during flowering.

    Method

    The heat-tolerant maize variety Zhengdan 958 (ZD958) and the heat-sensitive maize variety Xianyu 335 (XY335) were used as materials, and were grown in pots. A total of four N application levels (0, 75, 150, and 225 kg/hm2 labeled N0, N1, N2, and N3, respectively) were set as the main zones, and two temperature gradients as the sub-zones: high temperature treatment in the greenhouse ((35±2) ℃, HT) and outdoor natural temperature ((30±2) ℃, CK). The physiological characteristics (LAI, SPAD, leaf greening, SOD, POD, CAT, MDA, Pro, and pollen viability), dry matter accumulation, and yield indexes of different maize varieties were determined at different periods after the flowering of maize under continuous high temperature treatments for 5 days.

    Result

    High temperature stress inhibited the elevation of LAI, SPAD, and greening of maize leaves, disturbed the normal synthesis of antioxidant enzymes, increased the accumulation of lipid-membrane peroxidation products and osmotic-regulating substances, and reduced pollen viability in maize. Reasonable nitrogen fertilizer dosage could effectively alleviate the adverse effects of high temperature stress on normal leaf metabolism, increase photosynthetic product accumulation and improve dry matter accumulation characteristics by improving maize leaf LAI, SPAD and green holding, increasing of SOD, POD, CAT activity and the content of Pro, and decreasing the content of MDA. For maize yield and its components, 100-kernel mass and seed yield were significantly reduced after high temperature stress at anthesis. Compared with N0, the seed yield of ZD958 and XY335 treated with N2 after high temperature stress increased by 40.79% and 51.20%, respectively, and the seed yield of ZD958 increased by 15.61% compared with that of XY335, which indicated that reasonable nitrogen application could effectively alleviate the adverse effects of high temperature stress on maize seed yield, with N2 treatment showing the best performance. Principal component analysis showed that the composite scores of ZD958 and XY335 under each nitrogen treatment after high temperature stress were ranked as N2>N3>N1>N0.

    Conclusion

    Under the high temperature stress at the flowering stage of maize, keeping the N application rate at 150 kg/hm2 can continuously optimize the physiological characteristics of maize leaves and dry matter accumulation characteristics, and then improve the yield, to realize the compensation of reasonable N application to the high temperature stress at the flowering stage of maize.