收藏切换
Flow field simulation and performance test of millet air-screen cleaning device
收藏切换
Xin MAO1, Shuaifei LI1, Weiguo ZHANG2, Dongming ZHANG1, Ziheng ZHANG1, Zeming WANG1
Journal of Northwest A&F University (Natural Science Edition) | 2026, 54(3) : 171 - 180
Less
收藏切换
Journal of Northwest A&F University (Natural Science Edition) | 2026, 54(3): 171-180
Flow field simulation and performance test of millet air-screen cleaning device
Full
Xin MAO1, Shuaifei LI1, Weiguo ZHANG2, Dongming ZHANG1, Ziheng ZHANG1, Zeming WANG1
Affiliations
  • 1College of Engineering, Heilongjiang Bayi Agricultural University, Daqing, Heilongjiang 163319, China
  • 2College of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi 712100, China
Published: 2026-03-10 doi: 10.13207/j.jnwafu.2026.03.018
Outline
收藏切换
Objective

The study aims to design an air-screen cleaning device for millet cleaning, enhancing the mechanization level of millet harvesting in China.

Method

Taking the woven sieve and perforated sieve as the research objects, the main material characteristics of threshed materials from ‘Longgu 31’ millet were determined. Fluent simulation analysis was used to simulate the flow field of the cleaning device with upper and lower sieves as woven sieve+woven sieve, perforated sieve+perforated sieve and woven sieve+perforated sieve, respectively. Wind speed on the vibrating screen surface with upper and lower sieves being woven sieves was measured using the self-made millet air-screen cleaning test bench. Taking the impurity rate of grains and the cleaning loss rate as the evaluation indices, a three-factor, five-level orthogonal test was conducted on the crank speed, fan speed and fan inclination angle, and a regression model was established. Subsequently, the multi-objective variable optimization method was utilized to optimize the regression model by Design-Expert 8.0.6, and the optimal structural parameter combination was determined. Finally, a bench verification test was carried out with the rounded optimal values of crank speed, fan speed and fan inclination angle.

Result

Fluent simulation analysis showed that when woven sieves were used for both upper and lower screens, airflow exhibited optimal penetration through the screens without vortex formation. The rear-section airflow maintained high velocity while being efficiently exhausted from the cleaning device. Bench test revealed that wind speed at a sieve-surface height of 90 mm was lower than that at 60 mm, which was conducive to the dispersion of the threshed materials. The wind speed at a sieve surface height of 60 mm was higher than that of 30 mm, promoting the separation of the threshed materials. The maximum wind speed on the screen surface was 4.22 m/s, which exceeded the residue suspension speed, making it sufficient to separate the light impurities from the millet grains. This validates the reliability of using weaving sieves for both the upper and lower screens. The multi-factor test demonstrated that the optimal operating parameters for the air-screen cleaning device were as follows: crank speed of 239.8 r/min, fan speed of 920.23 r/min, fan inclination angle of 25.98°, theoretical grain impurity rate of 2.89%, and cleaning loss rate of 1.78%. A bench verification test was carried out using the round values (crank speed 240 r/min, fan speed 920 r/min, and fan inclination angle 26°). The actual grain impurity rate was found to be 2.95%, and the cleaning loss rate was 1.81%.

Conclusion

The relative errors of grain impurity rate and cleaning loss rate between the bench verification test and the theoretical optimization results were 2.08% and 1.69%, respectively. Both errors were less than 5%, indicating that the designed air-sieve millet cleaning device had a reliable structure and met the operational requirements of millet cleaning operation.

millet  /  cleaning device  /  air-screen cleaning  /  Fluent simulation
毛欣, 李帅霏, 张卫国, 张东明, 张紫恒, 王泽铭. 谷子风筛式清选装置流场仿真与性能试验. 西北农林科技大学学报(自然科学版), 2026 , 54 (3) : 171 -180 . DOI: 10.13207/j.jnwafu.2026.03.018
Xin MAO, Shuaifei LI, Weiguo ZHANG, Dongming ZHANG, Ziheng ZHANG, Zeming WANG. Flow field simulation and performance test of millet air-screen cleaning device[J]. Journal of Northwest A&F University (Natural Science Edition), 2026 , 54 (3) : 171 -180 . DOI: 10.13207/j.jnwafu.2026.03.018
Year 2026 volume 54 Issue 3
59
14
Cite this Article
BibTeX
Article Info
doi: 10.13207/j.jnwafu.2026.03.018
  • Receive Date:2024-10-25
  • Online Date:2026-11-13
  • Published:2026-03-10
Article Data
Affiliations
History
  • Received:2024-10-25
  • Revised:2025-01-02
Funding
Affiliations
    1College of Engineering, Heilongjiang Bayi Agricultural University, Daqing, Heilongjiang 163319, China
    2College of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi 712100, China
References
Share
https://castjournals.cast.org.cn/joweb/xnxbzk/EN/10.13207/j.jnwafu.2026.03.018
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT