Home Latest Articles
Latest Articles
  • Bing-Gang WANG, Cheng-Zhen DING, Jian-Lu WU, Xiang LI, Qing-Yu DONG, Dan ZHANG
    Geophysical and Geochemical Exploration. 2026, 50(3): 516-524.

    Currently, full-waveform inversion (FWI) represents the velocity inversion and modeling technology with the highest accuracy. By continuously updating the velocity model through an iterative algorithm, FWI gradually minimizes the errors between forward modeling data and real data, thereby approaching the true velocity model. The primary challenge faced by FWI is cycle skipping, which occurs when the phase difference between forward modeling data and real data exceeds half a cycle. In this case, with the updating of the velocity model, the forward modeling data and real data will be incorrectly matched, causing the velocity model to converge in a wrong direction. In conventional least-squares FWI, the objective function considers merely the energy difference between forward modeling data and real data. In this case, cycle skipping can only be avoided as far as possible by using the low-frequency signals with high cycles in the data and a sufficiently accurate initial velocity model. This poses stringent demands for the quality of low-frequency signals in raw data and entails a substantial workload for the initial velocity modeling. To address this issue, this study proposes a time-lag FWI (TLFWI) method. In this method, the objective function is defined as the integral of the energy difference between forward modeling data and real data with respect to their time difference. In this manner, the objective function accounts for both the energy difference and time difference between forward modeling data and real data, enabling cycle skipping to be effectively avoided. In the case of weak low-frequency signals in raw data and large errors in the initial velocity model, TLFWI can still enable the velocity model to converge in the correct direction. Therefore, TLFWI reduces the dependence on low-frequency signals in raw data and decreases the workload for constructing the initial velocity model. The results of experiments on a theoretical velocity model and practical seismic data reveal that, compared to least-squares FWI, TLFWI can derive a more accurate velocity model under the condition of high errors in the initial velocity model. Notably, both least squares FWI and TLFWI used in this study are turning wave FWI. In other words, only turning waves in seismic data are used for matching in both methods, with reflected waves excluded.

  • Qi GUAN, Qian-Zong BAO, Xue-Fei WU
    Geophysical and Geochemical Exploration. 2026, 50(3): 525-532.

    Seismic-while-tunneling (SWT) detection, serving as a pivotal technology for mitigating the imbalance between mining and roadway tunneling in coal mines, enhances the tunneling efficiency by simultaneous seismic detection and roadway tunneling. However, due to constraints such as highly random seismic sources generated by tunnel boring machines and severe interference from strong underground background noise, data denoising and extraction of effective waves have remained as technical challenges. Hence, this study proposes a dynamic imaging method for SWT detection based on multi-algorithm joint denoising and wavefield separation. First, variational mode decomposition is introduced for the multi-scale decomposition and mode selection of raw seismic signals. In combination with the independent component analysis optimized by an improved artificial bee colony algorithm, a joint denoising model is constructed to deeply suppress complex mechanical and electromagnetic noise. Second, based on the cross-correlation principle, continuous random vibration records are reconstructed into virtual pulse source records, and strong direct waves are removed using singular value decomposition, thereby enabling the precise extraction of weak effective reflected waves. Third, the fine-scale characterization of geological structures along the sidewalls and ahead of the roadway is achieved using a diffraction-scanning migration imaging algorithm. By constructing a SWT advance detection model with dimensions of 300 m × 100 m × 200 m using a three-dimensional finite-difference algorithm for elastic waves, this study verified the capability of the proposed method to reconstruct effective wavefields in environments with low signal-to-noise ratios (SNRs). In the field application at mining face 51210 of the Guojiawan coal mine, the proposed method successfully delineated concealed faults along the roadway sidewall, with the interpretation results highly consistent with borehole verification data. Therefore, the proposed method effectively overcomes the challenge of low SNRs in SWT detection, providing robust technical support for the real-time monitoring of hidden disaster-causing factors and intelligent rapid excavation of roadways in coal mines.

  • Jian-Li LIU, Xin-Sheng LI, Xiao-Long CHEN, Bing LI, Xu-Yang ZHAO, Chen SHEN
    Geophysical and Geochemical Exploration. 2026, 50(3): 533-550.

    As mineral exploitation is gradually shifting to complex terrain areas, the traditional transient electromagnetic (TEM) method has encountered challenges such as inconvenient deployment and low efficiency in these areas. In contrast, the semi-airborne TEM (SATEM) method, which combines a ground-based transmitter and an airborne receiver, can significantly improve data acquisition efficiency and adaptability in complex areas. However, due to the undulating terrains, the grounded source often deviates from the ideal straight-line pattern. The geometrical distortion effects of the grounded source on electromagnetic responses remain under-studied. Through 3D finite-element forward modeling, this study systematically analyzed the electromagnetic field distortions caused by the curvature and vertical undulation of the grounded source under typical undulating terrains, such as mountain peaks and valleys. The results indicate that the non-ideal geometry of the grounded source is the primary cause of early asymmetric electromagnetic responses and false anomalies. Mountain peaks concentrate the electromagnetic energy in the shallow parts of the mountains, suppressing the detection depth, whereas valleys enhance subsurface coupling due to the lower position of the grounded source, thus expanding the early detection range. More importantly, adopting a terrain-following flight line (i.e., maintaining a constant receiver height relative to the ground surface) can effectively mitigate the false anomalies of apparent resistivity caused by the geometrical distortion of the grounded source and the terrain coupling. Accordingly, this study proposes a SATEM-optimized data acquisition scheme for complex terrains, providing theoretical support and technical guidance for improving the accuracy of deep resource exploration.

  • Kai-Yao WEI, Zhi-Min LIU, De-Zheng LI, Dong-Min WANG, Qiang MA, Chuan-Suo ZHI
    Geophysical and Geochemical Exploration. 2026, 50(3): 551-560.

    To ascertain the contamination range and degree caused by the migration of the chromium contamination field, this study constructed a net reserve-based model for chromium contamination sources in water-rich soils of a permeable layer with high permeability coefficients. Based on the COMSOL software, the migration patterns of the heavy metal contaminant—chromium over time were numerically simulated. Targeting the migration model of the chromium contamination field in different periods, the Wenner, dipole-dipole, and pole-dipole arrays were used for detection, respectively. Through multi-constraint joint inversion of resistivity and polarizability, this study comparatively analyzed the resistivity and polarization imaging effects of different detection arrays. The inversion results show that under noise-free voltage conditions, the detection depths of these detection arrays decreased in the order of pole-dipole, dipole-dipole, and Wenner arrays. The Wenner array yielded better resistivity imaging effects relative to polarization imaging. The dipole-dipole array is suitable for detecting the shallow, small-scale contamination field featuring a complex morphology. The pole-dipole array outperformed others in shallow detection. With a mean disturbance voltage of 7 mV applied, the anti-noise performance of the detection arrays showed descending order of Wenner, dipole-dipole, and pole-dipole arrays, with the apparent polarizability consistently affected less than the apparent resistivity.

  • Peng XIE, Xue-Fei WU, Shi-Feng YIN, Ning KANG, Qi GUAN
    Geophysical and Geochemical Exploration. 2026, 50(3): 561-566.

    Seismic-while-tunneling (SWT) detection tends to encounter challenges including unstable imaging, excessive artifacts, limited target-background contrast, and poor positioning accuracy. To address these issues, this study proposed a dynamic imaging technology based on an improved diffraction-scanning migration imaging (DSMI) method: TA-DSMI. By introducing a true-amplitude weighting function into the DSMI imaging kernel, the TA-DSMI constructs a physically interpretable weighting system consisting of geometric spreading compensation, incident/scattering angle consistency, mild frequency band/absorption compensation, and robust noise suppression. The weighting system is then coupled with an end-to-end process that involves pre-whitening, sliding window stacking, fine-scale scanning of the region of interest (ROI), and local normalization. Consequently, the TA-DSMI achieves minute-level refreshing without significantly increasing the computational overhead. The results indicate that compared to the DSMI, the TA-DSMI improved the contrast-to-noise ratio (CNR) by about 3 dB and reduced the peak positioning error of anomalous bodies by about 1.5 m, with a single imaging time of ≤5 min. Overall, the TA-DSMI significantly enhances the physical consistency and interpretation reliability of SWT dynamic imaging, providing an engineering-feasible technology pathway for real-time advanced identification and spatiotemporal tracking of concealed discontinuities.

  • Long-Ke YI, Bo YANG, Guan-Chao LI, Xiao-Ming LIN, Ying HU
    Geophysical and Geochemical Exploration. 2026, 50(3): 567-579.

    By integrating multi-source radioactivity survey data and using Geodetector, this study explored the spatial variations of the gamma radiation field at the ground-air interface and their influence mechanisms in the Pearl River Delta economic zone. The results indicate that key factors influencing the distribution of the radiation field include soil radon concentration (q=0.852), 238U content (q= 0.816), and 232Th content (q=0.803). Besides, formation lithology (q=0.791), fault structures (q=0.786), and chronostratigraphy (q =0.778) also play a significant role. The interaction detection indicates that the synergy of soil radon concentration and fault structures demonstrates the strongest explanatory power (q=0.875), suggesting the mechanism of structure-controlled transport and soil-controlled accumulation. Risk detection demonstrates that high-radiation radon contributors include normal faults, magmatic rocks, and Jurassic strata. The results of this study reveal that the spatial distribution of the radiation field is governed by a three-level system comprising nuclide content as a direct source, lithology and chronostratigraphy as carriers, and fault structures as pathways for radon transport.The research results have provided a scientific basis for regional radiation environmental risk assessment and pollution prevention and control.

  • Yu TANG, Xiao-Meng CHENG, Ling HE, Chao WU, Wei HAN, Chen ZHAO, Fu-Gui ZHANG
    Geophysical and Geochemical Exploration. 2026, 50(3): 580-589.

    Insufficient selenium intake in China has received widespread attention. Nationwide land quality geochemical surveys have shown that selenium contents are relatively high in the mountainous areas of southwestern China. However, the sources of selenium and the factors influencing its enrichment in these areas remain unclear. In this study, Muchuan County, which has favorable selenium-rich conditions in the Wumeng mountainous area, was selected as the study area. A random forest model and SHAP method were used to investigate soil selenium content and its influencing factors by integrating environmental variables, including elevation (EL), annual mean land surface temperature (LST), precipitation (Prec), parent material (PMT), and soil physicochemical properties. The results showed that the mean selenium content in the soils of Muchuan County was 0.38×10−6, which was 1.8 times the background value of soils in China, indicating an overall relatively high level. The area of land with relatively abundant selenium and above was 703.59 km2, accounting for 49.99% of the total area, indicating good potential for selenium-rich land resources. The random forest model showed good predictive performance, with R2 values of 0.84 and 0.76 for the training and test sets, respectively. SHAP analysis showed that SOM was the dominant factor controlling the variation in Se content. Areas with high EL, SOM, and Mn were favorable for Se enrichment, whereas high Prec, LST, and pH promoted Se leaching.The research suggests that the Se enrichment in the surface soil of Muxian County is jointly controlled by the parent material of the soil, topography, climate and soil physical and chemical properties. Among them, SOM has the most significant effect on Se retention. The results of this study can provide certain basis for the evaluation and development and utilization of selenium-rich land resources in the Wumeng Mountainous Area.

  • Wei TANG, Zheng-Jiang TANG, Peng SUN, Qiu-Xuan WANG
    Geophysical and Geochemical Exploration. 2026, 50(3): 590-597.

    Selenium-rich land resources are increasingly attracting public attention; however, the methodology for their selection and prioritization remains under-studied. Using the geochemical survey data of land quality in Shucheng County, Anhui Province, this study delineated the distinctive selenium-rich land in the study area in accordance with the Delineation and Logo of Natural Selenium-rich Land (DZ/T 0380—2021). A total of seven relatively contiguous selenium-rich land plots were identified. By comprehensively analyzing the key factors that constrain the resource endowment, development, and utilization of selenium-rich land, this study established a methodological and technical indicator system for prioritizing and grading selenium-rich land. Based on this system, the seven selenium-rich land plots in the study area were prioritized and graded, with four selected for further verification, yielding favorable results. One of the four selenium-rich land plots was included in the fifth batch of natural selenium-rich land plots recognized by the Geological Society of China. Overall, this study provides technical support for the evaluation, delineation, development, and utilization of selenium-rich land resources in Shucheng County, as well as a methodological and technical framework for similar work in China.

  • Zhi-Jun BAI, Shao-Bo QU, Hong-Bo LIANG, De-Chun LI
    Geophysical and Geochemical Exploration. 2026, 50(3): 598-606.

    To address the challenges faced by the advanced detection of geological structures right ahead of the mining face during roadway tunneling, this study investigated the feasibility of in-seam seismic exploration technology. Based on theoretical foundation and data processing methods of seam wave-based advanced detection, as well as simulations using the high-order staggered-grid finite-difference algorithm, this study compared the fault detection accuracy of three imaging methods: envelope stacking, diffraction migration, and elliptical arc migration. The results indicate that for faults with high dip angles, the envelope stacking method fails to represent the true fault locations, necessitating migration correction for accurate spatial positioning. Additionally, the accuracy of the imaging velocity significantly affects the imaging results. In the case of an identical velocity error, the diffraction migration method outperforms in revealing fault locations during roadway tunneling, while the elliptical arc migration method exhibits superior performance in determining fault strikes. The practical application demonstrates that in areas with high-quality seam wave data, all three imaging methods can effectively detect faults in advance. For areas with low-quality seam wave data, the combination of envelope stacking and migration correction is recommended for fault imaging. This study provides a significant technical reference and methodological guidance for seam wave-based advanced detection, indicating that the proposed method can provide a reliable basis for the adjustment of roadway tunneling plans, as well as the prevention and control of geological hazards.

  • Ze-Lin LI, Yi-Chong WANG, Jun-Lu WANG, Hang-Hang XU
    Geophysical and Geochemical Exploration. 2026, 50(3): 607-613.

    The detection of unexploded ordnance (UXO) is a significant research topic in environmental and engineering geophysics. Magnetic survey serves as an economical, efficient, safe, and reliable geophysical method. However, current methods for UXO detection based on magnetic survey remain limited by low automation levels and significant redundant solutions. To address these limitations, this study proposed a UXO detection method for high-precision magnetic data based on the normalized source strength (NSS) theory. In the proposed method, magnetic anomaly data were first transformed into NSS data. Subsequently, an improved Euler deconvolution technique was applied to the NSS data to estimate the spatial location and structural index of the field source. Model tests and field data processing results demonstrate that the proposed method achieved a high level of automation and fewer redundant solutions.