Latest ArticlesThis study aims to determine the geochemical characteristics of sedimentary clay-type lithium (Li) deposits and their implications for ore prospecting in the Shirenbei Basin, northeastern Guangdong, China, as well as exploring the regional metallogenic conditions and ore-prospecting indicators. Based on a 1∶200,000 stream sediment geochemical survey, this study conducted a comprehensive analysis of the geochemical characteristics of Li and their relationships with strata, lithologies, and sedimentary environments using methods of economic geology, sedimentology, mineralogy, and geochemistry. Two Li anomalies were delineated in the study area. Among them, the Li anomaly in the north exhibits a larger scale and a peak anomaly value of 234.3×10−6, with the Yetang Formation (K2yt) exposed in the anomaly center. The composite anomaly consists of 16 elements (or oxides), including Li, fluorine (F), and sodium oxide (Na2O), with distinct overlapping relationships observed among them. Investigations reveal that the Yetang Formation is a lacustrine evaporative sedimentary suite, with its sedimentary center located in the northern part of the basin. Zones with high Li content correspond primarily to zones containing calcareous, fine-grained clastics. Rock and mineral analyses indicate a significant positive correlation between whole-rock Li2O content and clay mineral content. The Yetang Formation exhibits significantly higher geochemical background values of whole-rock Li content than other geological units, with the Li enrichment center identified in the fourth layer of the formation. Three ore-bearing layers were delineated in the study area. They are primarily distributed in the middle and upper parts of the Yetang Formation, with a total thickness of 226.14 m. The ore-bearing rock series show an exposed area of approximately 5.2 km2, demonstrating great potential for ore prospecting. The results of this study suggest that the Li geochemistry in stream sediments can effectively reflect the regional metallogenic background and that the Li-F-Na2O anomaly combination serves as a significant ore-prospecting indicator for clay-type lithium deposits. Lithium mineralization is jointly controlled by factors including paleoclimate, evaporative sedimentary environment, lithofacies paleogeographic framework, specific stratigraphic units, and lithologic suites. Additionally, multiple similar sedimentary basins occur in the eastern segment of the Nanling metallogenic belt and its adjacent Wuyi metallogenic belt, holding prospects for further breakthroughs in ore prospecting.
The Bangpu mining area, located in the eastern Gangdese metallogenic belt, represents a typical porphyry-skarn deposit. Since skarn ore bodies occurring in shallow skarns at the periphery of porphyries have been largely exhausted, there is an urgent need to explore deep replacement resources. This study aims to further determine the spatial distribution of deep-seated concealed rock masses and their surrounding ore bodies in the study area. This effort will help achieve breakthroughs in mineral exploration. To this end, this study conducted 1:10000 gravity surveys, high-precision magnetic surveys, and audio-frequency magnetotelluric (AMT) surveys in the eastern part of the Bangpu mining area, followed by an analysis and summary of the causes of geophysical anomalies. The comprehensive geophysical prospecting results indicate that the high- and low-amplitude gravity anomaly zones in the central part of the study area correspond to intermediate-mafic and intermediate-acid concealed rock masses, respectively. Two magnetic anomalies identified in the southwest might be ore-induced anomalies caused by magnetite and pyrrhotite surrounding skarns. In combination with the AMT data, boreholes were drilled in low-resistivity zones at the edge of high-amplitude gravity anomalies, as well as zones with strong magnetism, moderate gravity, and low-amplitude resistivity anomalies, to explore the deep rock masses and their surrounding skarn-type ore bodies. Consequently, two copper belts (ore bodies) and two lead-zinc ore bodies were identified. The exploration results of this study demonstrate that high-precision gravity surveys, magnetic surveys, and AMT surveys perform well in exploring deep concealed ore bodies in the Bangpu mining area, Tibet. These methods constitute an effective technical combination for deep mineral exploration of similar deposits in the Gangdese metallogenic belt.
In the evaluation of the performance of horizontal well fracturing for complex reservoirs, conventional microseismic monitoring faces two major challenges. First, reliance only on microseismic data renders it difficult to construct a continuous fracture network that precisely matches geological conditions. Second, insufficient analysis of both primary mechanisms governing the spatiotemporal distribution of microseismic events and the causes of in situ stress deflection leads to a lack of theoretical support in the evaluation. This study investigated the Y108 horizontal well in the North Jiangsu Basin. Based on the fracturing-induced microseismic responses of the well, this study proposes a multidisciplinary parameter-coupling method for collaborative microseismic-fracture network modeling. By deeply integrating microseismic data with rock properties, reservoir anisotropy, and lithofacies variations, the proposed method overcomes the limitations of conventional methods driven solely by microseismic data. By constructing a continuous fracture network using the shortest path connection criterion, this study systematically reveals the intrinsic relationship of the spatiotemporal distribution of microseismic events with rock properties and stress parameters. The results indicate that the localization results of microseismic events highly correlate with the distribution of natural fractures predicted based on the ant-tracking volume. The constructed fracture network aligns with the principal stress direction, conforming to geological understandings. The strong anisotropy, extensive microfractures, and significant lithofacies variations in the second submember of the fourth member of the Funing Formation are identified as the core factors driving in situ stress deflection, deepening the understanding of fracturing-induced response mechanisms in complex reservoirs. The results of this study provide reliable technical support for accurately assessing the fracturing performance of horizontal well Y108 and offer an innovative approach for optimizing the fracturing design of similar reservoirs, holding great theoretical and engineering value.
The Chiwawu Cu-Mo deposit is an important porphyry-hosted Cu-Mo mining area in the northern Taihang Mountains metallogenic belt. However, the prospecting work in this area has encountered bottlenecks in recent years. The geophysical exploration in the past was dominated by the induced polarization surveys, barely reaching the deep strata. Given this, this study conducted an audio magnetotelluric sounding, obtaining the electrical structure of the mining area. Electrical structures combining geological and drilling data can lead to the following conclusions: The low-resistivity anomalies beneath high-resistivity rock masses represent play fairways, while the shallow fault damage zones had a disruptive effect on ore bodies. Additionally, by setting the electrical principal axis orientation as an independent parameter, this paper analyzed the distribution characteristics of electrical principal axes along two profiles and their relationships with mineralization using the statistical imaging technique based on multi-site multi-frequency impedance tensor decomposition. The statistical results indicate continuous variations in the electrical principal axis orientation within a greater depth range along the Profile L3, suggesting the probable presence of deep-seated concealed small rock masses. This finding provides new insights for the application of the Audio-frequency Magnetotelluric (AMT) method in mineral exploration and offers guidance for the next phase of mineral search in the mining area. This study provides new insights into the application of the AMT method in mineral exploration and offers guidance for future prospecting in this mining area.
Polymetallic deposits, primarily porphyry-related polymetallic deposits, are hosted in eastern Hebei province in the northern margin of the North China Block. The study area, located in northeastern Chengde, is a typical rhyolite porphyry-hosted molybdenum-polymetallic deposit. Within this area, cryptoexplosive breccias, rhyolites, and the Archean biotite amphibole plagiogneisses are exposed on the surface. Based on previous data, it is speculated that the ore-bearing rhyolite porphyries occur beneath the cryptoexplosive breccias, with a burial depth generally exceeding 500 m. However, the deep-seated molybdenum-polymetallic deposits can barely be accurately located with traditional geophysical methods. Therefore, this paper used the audio magnetotelluric (AMT) method for the first time to locate the concealed porphyry-hosted molybdenum-polymetallic deposits in this area. Based on the low-resistivity characteristic of the molybdenum-polymetallic ores, and with
Gas reservoirs occurring within the Ordovician buried hills in the Qianmiqiao block of the Dagang oilfield have been identified for over two decades. However, the hydrocarbon accumulation model and enrichment patterns of these reservoirs remain unclear, leading to a torturous exploration and exploitation process, along with difficulties with the effective production of proven reserves. In recent years, with the advancement in related studies, researchers have gradually recognized the controlling effects of fractured-vuggy carbonate reservoirs on hydrocarbon accumulation and enrichment, changing the previous view of structurally controlled, layered hydrocarbon reservoirs. To predict fractured-vuggy reservoirs, this study employed high-accuracy 3D seismic data tailored to reservoir imaging. Through fine-scale reservoir calibration, the seismic responses of the fractured-vuggy reservoirs were determined. To achieve lateral identification of their planar positions and the vertical delineation of their top and bottom boundaries, this study conducted seismic facies identification and seismic facies-driven constrained sparse spike inversion (CSSI) by fully mining the reservoir information implicit in seismic data and innovating technical approaches. As a result, the spatial distribution of fractured-vuggy reservoirs was predicted. The prediction results, consistent with geological laws and aligning highly with actual drilling results, provide strong support for the selection, design, and deployment of efficient well locations in the fractured-vuggy carbonate reservoirs hosted by buried hills in the Qianmiqiao block. The results also serve as a reference for research on hydrocarbon reservoirs within buried hills in similar blocks of the Bohai Bay Basin.
The W Sag in the western South China Sea has been extensively explored. Consequently, most oilfields in the sag have transitioned into the medium to high water cut stage, facing challenges in tapping potential reserves and maintaining stable production. In this context, both hydrocarbon exploration in complex concealed reservoirs in the Paleogene strata and paleo-buried hills and fine-scale potential tapping in mature oilfields have become primary targets for reserve growth and production addition. However, under complex geological conditions, seismic exploration faces multiple issues, including complex seismic wavefields, weak seismic signals, low resolution, and strong anisotropy. To address the challenges encountered in the exploration and exploitation of complex reservoirs in the western South China Sea, this study investigated key technologies in terms of ghost wave suppression, multiple suppression, and high-precision velocity modeling. To this end, the characteristics of the acquired wide-azimuth ocean bottom cable (OBC) seismic data were considered, and the approach to broadening frequencies and preserving amplitude was followed. Consequently, a set of key technologies for processing the OBC seismic data of structurally complex areas was established, effectively improving the signal-to-noise ratio and imaging quality of seismic data. Application to actual data demonstrates that the technologies established in this study substantially enhanced seismic data quality, laying a solid foundation for the fine-scale geophysical characterization of complex reservoirs.
Fracability serves as a critical indicator for assessing whether the production of unconventional oil and gas reservoirs can be increased by fracturing. Besides, it also represents a key parameter for evaluating shale oil wells. Currently, fracability evaluation is primarily conducted using the brittleness index based on the lithology or rock elasticity. However, due to the diversity of lithology and pore combinations, the elasticity and fracability of reservoirs may vary significantly even under identical lithological conditions. To address this issue, targeting the complex lithologies and diverse pores of shale oil reservoirs in the second member of the Kongdian Formation, Cangdong Sag, Bohai Bay Basin, this study proposes a reservoir fracability evaluation model that integrates the elastic-based brittleness index, compressive strength, and fault toughness. First, using the velocity and density data in array acoustic log data, elastic mechanical parameters, including the elastic modulus, Poisson's ratio, and Young's modulus, are calculated. Second, in combination with laboratory test results, the relationship between static and dynamic elastic moduli is established. Accordingly, elastic parameters, rock mechanics parameters, and the elastic-based brittleness index are determined. Third, for well blocks lacking shear wave information in conventional log data, a method for estimating the shear wave velocities of shales and sandstones is developed based on the Xu-White model, porosity, and contents of various minerals in shales. This model enables the calculation of parameters for the engineering sweet spots of reservoirs. Finally, a typical well in the study area is selected to calculate its fracability index (FI), followed by a grading evaluation. The results of this study indicate that FI values of < 0.45, 0.45~0.55, and ≥ 0.55 represent a low, moderate, and high fracability, respectively. The zones with low, moderate, and high fracability delineated in the study area agree well with the actual hydraulic fracturing results. This study provides a novel thought and technical approach for evaluating engineering sweet spots in shale oil exploration.
Electromagnetic transmitters have been extensively applied in the exploration of geological structures and mineral resources. Their effectiveness and signal quality are directly governed by the performance of their power supply modules. To achieve high power density and high stability in electromagnetic transmitters, this study proposed a power factor correction (PFC) technique based on the critical conduction mode (CRM). This technique employs a composite control strategy that combines voltage loop feedback with inductor volt-second balance feedforward. By leveraging the resonance between the boost inductor and parasitic capacitance during the dead time, this technique enables zero voltage switching (ZVS) for all power switch tubes, thereby significantly reducing switching losses. Experimental results demonstrate that the designed PFC achieved the expected performance, yielding an efficiency of 95.4% and a power factor of 0.99. Overall, this technique can effectively enhance the performance of the power supply modules in electromagnetic transmitters, holding significant practical value.
Surface wave analysis, used to characterize near-surface shear-wave velocity structures, has been widely applied to various distinct fields. Extracting surface wave dispersion information serves as a significant step in surface wave analysis. Conventional methods for picking dispersion curves primarily include manual picking and semi-automatic picking in manually delineated dispersion energy zones. Given the large volume of seismic data used in oil and gas exploration, manual processing methods struggle to satisfy the requirements of practical production. Therefore, this study proposes a method for automatically picking multi-mode surface-wave dispersion curves based on an unsupervised machine learning approach. First, some background noise points in a dispersion spectrum are removed using energy threshold filtering. Second, different surface wave modes in the dispersion spectrum are determined using the energy density-based spatial clustering of applications with noise (E-DBSCAN) algorithm. Third, energy peaks in zones corresponding to different surface wave modes are searched, followed by noise elimination through Kalman filtering and smoothing. As a result, multi-mode dispersion curves are obtained. The proposed method incorporates dispersion energy values, offering high reliability. Numerical experiments demonstrate that the automatically picked dispersion curves accurately match the theoretical dispersion curves. Meanwhile, method comparison and field data tests further confirm the reliability of the proposed method.