Home Archive
Archive
2026 Volume 50 Issue 1  Published: 2026-02-10
   Next
  • Fu-Sheng SONG , Chang-Wei MA , Yong-Fei WANG
    doi: 10.11720/wtyht.2026.1185

    The study area, a semi-humid alpine mountainous area, is located in the south of the Western Sichuan Plateau. It is characterized by shallow overburden, sparse bedrock outcrops on the surface, and undeveloped drainage systems. Under such a unique landscape, the soil geochemical survey demonstrates significant advantages for the exploration of concealed non-ferrous metal minerals. This study, through 1∶10,000 soil geochemical surveys, systematically identified three element assemblages: gold-arsenic-antimony (Au-As-Sb), lead-zinc (Pb-Zn), and bismuth-tin (Bi-Sn). Through follow-up geochemical surveys, it delineated a composite anomaly zone with high prospecting potential within the study area. A prospecting target was further identified in combination with the geochemical characteristics of elements, element assemblage patterns, and regional metallogenic background. This study revealed a total of five concealed gold orebodies, which were verified by drilling engineering, marking a significant breakthrough in mineral exploration. This fully demonstrates the application potential of this method for gold exploration in shallow overburden areas within the Western Sichuan Plateau.

  • Li-Chun FU , Qing-Yuan SONG , Bo LI , He YUAN , Tian-Kun XIE , Tao-Yuan WANG , Zeng-Tao LI , Long ZHOU , Xue-Feng LI , Xian-Nan ZHU , Jia-Hui WANG , Yi-Cheng LI
    doi: 10.11720/wtyht.2026.1231

    In nature, gold typically occurs as extremely fine-grained native gold in an extremely uneven distribution. As a result, some gold deposits (ore occurrences) lack corresponding gold geochemical anomalies, posing significant challenges to geological prospecting based on geochemical anomalies. Hence, under the guidance of the geoscience big data-driven approach, this study identified the correlations among data to address geological prospecting challenges. Based on the soil geochemical data of the Gelebile River area in northeastern Heilongjiang Province, 10 elements in the area were statistically analyzed using the CV1 and CV1/CV2 interpretation diagrams (CV: coefficient of variation), revealing high gold and molybdenum mineralization potential. By constructing a regression model for gold, this study delineated two prospecting targets in the Gelebile River area. The No. 1 prospecting target was verified through trenching and drilling engineering, exposing one gold and one molybdenum ore body. This study demonstrates that the prospecting and prediction model established based on multivariate regression analysis can significantly improve prospecting efficiency. Moreover, it offers an effective solution to quantitative prediction of prospecting targets in small-scale areas where the precise locations of mineral deposits (or occurrences) remain unknown.

  • Yong-Qian YANG , Xin-Xin YANG , Wang CHEN , Wan-Lu GAO , Xin CHEN , Peng CHEN , Xiao-Yang LI , Hong-Li YAN
    doi: 10.11720/wtyht.2026.1134

    The western Henan hosted large-scale diasporic karst bauxite deposits in the Late Carboniferous formations, characterized by abundant rare, dispersed, and rare earth elements, along with high abundances of lithium and niobium-tantalum. Focusing on six bauxite deposits in western Henan, this paper, based on their robust geological data, examines the correlations of lithium and niobium-tantalum with the primary chemical components of ores. Meanwhile, using X-ray diffraction (XRD) and scanning electron microscopy (SEM) methods, it investigated the distribution and enrichment mechanisms of lithium and niobium-tantalum in aluminum-bearing rock series. The results show that lithium and niobium-tantalum exhibited positive correlations with the primary chemical components in bauxites and roof clay rocks, with significantly different correlations observed in the floor ferrous clay rocks. This implies the complexity of provenances of the aluminum-bearing rock formations. In addition, in the roof clay rocks, bauxites, and floor ferrous clay rocks, the content of lithium was positively correlated with that of niobium-tantalum. This demonstrates that they share substantially identical enrichment mechanisms during deposition and the same or overlapping ore-forming provenances. This study demonstrates the possibility of associated lithium and niobium-tantalum in the study area evolving into industrial deposits, filling the gap in research on their enrichment mechanisms in the aluminum-bearing rock series, western Henan. The study area holds significant potential for lithium and niobium-tantalum resources, which will bring enormous economic benefits. Therefore, further mineral exploration should be carried out here.

  • Yuan LI , Wei LIU , Xiong ZHANG , De-Ming ZHANG
    doi: 10.11720/wtyht.2026.1295

    The Jinqiu gas field in the Sichuan Basin boasts abundant tight gas resources. However, the application of seismic steering technology for horizontal wells faces significant challenges associated with the following geological factors. Specifically, influenced by multistage tectonic movements, the Jurassic Shaximiao Formation exhibits widespread normal faults. Notably, the main target No. 6 and No. 8 channel sand bodies are characterized by vertical stacking, horizontal overlapping, rapid thickness variations, thin mudstone interbeds, and strong reservoir heterogeneity. Therefore, this study established a seismic steering technology system to guide tracking-while-drilling in horizontal wells of tight gas. According to different geological requirements, this study formulated seismic steering techniques corresponding to target entry and horizontal drilling based on high-confidence seismic data. First, based on regional velocity, a high-precision time-depth conversion was achieved using the dynamically calibrated velocity of pilot and drilling horizontal wells. This is then supplemented with geostatistical inversion to improve seismic resolution for guiding target entry. Afterwards, building upon regional results and integrating information from drilled pilot and horizontal wells, a series of techniques were employed to guide horizontal section drilling. These techniques include the dynamic anisotropic prestack depth migration coupled with processing-interpretation integration, dynamic geostatistical inversion, and prestack simultaneous inversion to predict formation attitudes, sand bodies, and gas-bearing sweet spots. The practice demonstrates the effectiveness of seismic steering technology in ensuring precise target entry and increasing the drilling rate of sand bodies and sweet spots, thus providing a reliable technical foundation for efficient development of tight gas.

  • Cao LI , Chun-Sheng YANG , Zong-Bao LIU , Guo-Song CHEN , Hong-Bo SHI
    doi: 10.11720/wtyht.2026.1337

    The Fuyu oil layer, located in the southern Daqing Placanticline within northern Songliao Basin, contains well-developed sandstone reservoirs, holding significant potential for increasing the reserves and productivity of the Daqing Oilfield. These reservoirs are characterized by porosity ranging from 9.0% to 13.6% and permeability between 0.1 mD and 3.21 mD, representing tight sandstone reservoirs. Their development requires horizontal wells and large-scale volume fracturing, thus placing high requirements on the accuracy of sand body prediction. These reservoirs are primarily concentrated in the Fuyu I and II oil formations, deposited predominantly in a deltaic plain subfacies. In these formations, the sand bodies are characterized by frequent lateral variations, small single-layer thickness, and a staggering and overlapping vertical distribution pattern. These characteristics result in complex seismic responses, posing great challenges to reservoir prediction. In view of the sedimentary characteristics of tight sandstone reservoirs in the Fuyu oil layer, this study employed development-scale seismic sedimentology for sand body prediction. Specifically, through seismic forward modeling based on well parameters, the seismic responses of thin tight sandstones were identified, followed by the integrated application of automated optimization of stratal slices and planar quantitative prediction of sandstone thickness. The results reveal a positive correlation between seismic amplitude and the thickness of sub-layer sandstones in the Fuyu oil layer, southern Daqing Placanticline. The development-scale seismic sedimentology technology quantitatively characterizes the planar distribution of sub-layer sand bodies, strongly supporting the successful well placement and implementation in the horizontal well pilot area. The success in the trial development of tight oil via horizontal wells in the Fuyu oil layer, Block M2, southern Daqing Placanticline, sets an example for tight oil development in the northern Songliao Basin. Therefore, the development-scale seismic sedimentology for sandstone prediction shall be given a high priority in the subsequent horizontal well design and implementation. This ensures a high penetration rate of sandstones and oil layers and provides technical support for developing tight oil resources in the Fuyu oil layer.

  • Jian SUN , Wei-Feng LUO , Jia-Zheng ZHANG , Zhi ZHOU , Hui ZHOU , Hai-Xia KANG , Li-Bo WANG , Nan-Kun YANG , Lin-Tao LUO
    doi: 10.11720/wtyht.2026.2500

    The Ankang area in southern Shaanxi Province holds favorable geological conditions for shale gas accumulation and shale gas resource potential. However, multistage tectonic processes have somewhat destroyed shale reservoirs. Pinpointing local favorable zones for shale gas accumulation has become a key issue for shale gas exploration in the Ankang area. Therefore, this study investigated the lower Cambrian Niutitang and Lujiaping formations in the Ankang area using the wide-field electromagnetic (WFEM) method. Through integrated information modeling and inversion imaging, this study determined the electrical structures of strata, fault structures, and the distributions of the bottom boundaries of the target layers in the study area. Moreover, combined with the organic geochemical characteristics of shales, this study identified the favorable and prospect zones for shale gas exploration. The results of this study provide significant guidance for further shale gas exploration in the Ankang area and a reference for other similar geophysical exploration of shale gas in China.

  • Sai-Sai QIN , Xiao-Hui WANG , Bing WANG , Zhong HE , Ke-Peng WANG , Cong LIN
    doi: 10.11720/wtyht.2026.1380

    The development of thin sand bodies (thickness: 4~6 m) in H3 reservoir, the Huoshaoshan Oilfield, Junggar Basin, faces vertical and horizontal prediction challenges. Given this, this paper proposed a technology that combines spectrum bluing for frequency broadening with dominant frequency band fusion of multi-source inversion data. Based on the blue spectrum of logging-derived reflection coefficient, the proposed technology expanded the pre-stack seismic high-frequency band to 120 Hz through well-seismic modeling. By doing so, it can enhance reservoir responses above 60 Hz and suppress low-frequency noises. The frequency-specific processing was then conducted for the three types of data volumes. Specifically, the low-frequency model (0~8 Hz) retained the structural trend, while the intermediate-frequency pre-stack waveform indicator inversion VP/VS volume (8~60 Hz) depicts the lithological boundary. The high-frequency pre-stack geostatistical inversion VP/VS volume (60~120 Hz) captures details of thin sand bodies. The adaptive weighting allocation achieved full-band synergistic integration, overcoming the identification limitations (8‒10 m seismic tuning thickness) of traditional inversion methods. The application of this technology shows that the fused data volumes can clearly identify thin sand bodies (4 m), with the lateral inter-well connectivity error reduced by 25% compared to conventional inversion methods. This technology established a multi-scale collaborative model of "trend controlling in low-frequency bands, boundary controlling in intermediate-frequency bands, and detail capturing in high-frequency bands", breaking through the bottleneck of multi-solutions from single-source inversion. The information fusion of full-frequency bands provides a replicable technical path for the detailed assessment of continental clastic reservoirs with thin interbeds. It also offers methodological inspirations for the development of similar complex reservoirs.

  • Xiao-Rui ZHAO , Hao CHENG , Xian-Nan WANG , Zhi-Yong FANG , Cheng-Hao LUO
    doi: 10.11720/wtyht.2026.1171

    Shearlet transform serves as a tool extensively applied for random noise attenuation in seismic data. However, it faces critical drawbacks: (1) the over-attenuation tendency of valid signals due to its traditional hard-threshold denoising method, especially the loss of weak signals, and (2) ignoring the spatial correlation of Shearlet coefficients. To address these issues, this paper proposed an adaptive-threshold denoising method for seismic data based on the spatial correlation of shearlet coefficients. Specifically, this method constructed a neighborhood correlation model between directional sub-bands in the scale dimension and established a cross-scale coefficient mapping relationship in the spatial dimension. Based on the correlation constraints, an adaptive threshold matrix with physical significance was derived. Theoretical calculation and experimental validation demonstrate the superiority of the proposed adaptive-threshold algorithm in enhancing the quality of seismic data over traditional hard-threshold methods. Specifically, it retained effective signals to the maximum extent during random noise attenuation and significantly improved the amplitude preservation of weak seismic events.

  • Xiao-Ming WANG , Bo LIU , Yu ZHAO , Dong LIU , Shang-Bin LIU , Guang YANG , Shan-Shan HU , Yong-Xing ZHOU , Huai-Feng SUN
    doi: 10.11720/wtyht.2026.2354

    Three-dimensional forward modeling in transient electromagnetic (TEM) surveys is a crucial tool for studying the response patterns of different scenarios and targets. A key issue in forward modeling is ensuring that the model closely approximates the actual geological conditions. This paper uses the EM3D software to model and conduct three-dimensional forward analysis of complex terrain and karst geological models, investigating the response characteristics of transient electromagnetic fields under complex geoelectric conditions. The three-dimensional forward simulation of complex terrain models reveals that complex terrain induces distortions in the transient electromagnetic response, and ignoring terrain effects can lead to false anomalies. The three-dimensional forward simulation of complex karst geological models shows that undulating strata and the boundaries of complex karst anomalies also cause distortions in the transient electromagnetic response, significantly interfering with anomaly identification. Analysis of the transient electromagnetic responses of the two complex geoelectric models indicates that the vertical induced electromotive force dBz/dt effectively reflects low-resistivity bodies, the electric field Ey parallel to the source accurately delineates the boundaries of low-resistivity bodies, and the electric field Ex perpendicular to the source shows positive values within the anomaly and coexisting positive and negative values outside the anomaly.

  • Yue ZHOU , Meng WANG , Hai-Bo LIU , Xiao-Long WU , Chuan-Ju ZHANG
    doi: 10.11720/wtyht.2026.2411

    The compensated neutron log (CNL) characterizes porosity by measuring hydrogen index (HI). However, its accuracy is not high due to the rock hydrogen content is not completely distributed in the pore fluid and fluid's types are complex. This study aims to determine the main reason for the difference between the measured HI and the formation porosity, thereby deepening the understanding of formation. Using Monte Carlo numerical simulation, multiple factors involved in the HI measurement are analyzed. First, the relationship between the HI and the near-to-far ratio of thermal neutron counting is obtained according to the calibration response of the compensated neutron tool in water-bearing limestone. Second, various factors that cause the difference between HI and formation porosity are obtained on the basis of a comprehensive analysis. The results show that lithology, mineral composition, clay, fluid state, formation water salinity will affect the measurement of HI and make it different from formation porosity. Particularly, high density, high shale content, gas content, and high salinity are the main factors affecting the HI measurement. Overall, this study provides a reference for determining formation porosity and identifying oil and gas through neutron data in the future.

  • Ling-Huo ZHANG , Na MA , Run-Sha CHEN , Xue-Miao DU , Xin-Wei GUO , Rui-Ling TANG , Jin-Feng BAI
    doi: 10.11720/wtyht.2026.1170

    Inductively coupled plasma mass spectrometry (ICP-MS), representing one of the most widely used techniques for measuring trace elements in biological samples, has been extensively applied in research on mercury determination. The mercury content in biological samples is generally low, and its determination by ICP-MS is susceptible to tungsten oxides. Consequently, selecting ICP-MS operating parameters directly affects the determination sensitivity, the degree of oxide interference, and, by extension, the quality of analysis results. This study conducted optimization experiments on key ICP-MS operating parameters, including RF power, nebulizer flow, auxiliary flow, sampling depth, and helium flow. Taking the mercury sensitivity and the productivity of tungsten oxides as the main reference indicators, the optimized parameters were determined as follows: RF power of 1 500 W, nebulizer flow of 1.00 L/min, auxiliary flow of 0.7 L/min, sampling depth of 5 mm, and helium flow of 5 mL/min. Comparative analysis revealed that the nebulizer and helium flow had the most significant influence on the analysis results. Based on the determined optimal operating parameters, the method detection limit for mercury was determined to be 0.50×10-9. The results were consistent with the results verified by several certified reference materials for the biological composition, with the relative standard deviation (RSD, n=10) ranging from 1.03% to 3.14%. This confirms the robustness of the optimized parameters and the applicability of the proposed method in laboratory analysis.

  • Chao LIANG , Xi-Fei DENG , Zhi-Jun SHEN , Hong-Bo LI , Tao WANG
    doi: 10.11720/wtyht.2026.1108

    With the increasing demand for groundwater detection accuracy in foundation pit engineering, the direct current resistivity (DCR) method has attracted widespread attention for its application potential in groundwater detection. This study investigated the application potential of the DCR method through numerical simulations. A two-layer structure model was constructed to analyze the impacts of the groundwater level depth on electrode response and the relationship between the number of electrodes and the detection range. The results indicate that a significant exponential relationship was observed between the extreme voltage values obtained from electrode detection and the groundwater level depth, demonstrating the potential of the DCR method in detecting the groundwater level depth. However, the increasing groundwater level depth led to intensified signal attenuation and noise interference, limiting the detection depth of the DCR method. Additionally, simply increasing the number of electrodes could not broaden the detection range effectively. Instead, it is necessary to enhance the imaging capability of the DCR method by changing the electric field distribution. Overall, this study provides a theoretical basis for the application of the DCR method in groundwater detection while presenting the challenges in practical applications.

  • Wei YE , Pan-Feng LIU , Bin-Bin SUN , Chao WU , Shuai LI , Yun-Fu XU , Ruo CHEN , Xiao-Han ZHANG , Quan-Cai LI , Shu-Jun HOU
    doi: 10.11720/wtyht.2026.1235

    As a crucial means for detecting concealed orebodies, geo-electrochemical measurements can effectively identify the information of subsurface and deep-seated mineral resources in the near-surface environment. Focusing on the Tongjiangling porphyry- and skarn-hosted copper deposit in Jiangxi Province, this study selected an exploration line and then deployed a section extending about 1.6 km for geo-electrochemical measurements. This study aims to investigate the effectiveness of geo-electrochemical measurement technologies and the difference between field and laboratory geo-electrochemical measurements, providing support for technical optimization, wide application, and research on underlying mechanisms. The results indicate that the field geo-electrochemical measurement performed well in the Tongjiangling copper deposit. It can delineate distinct multi-element geo-electrochemical anomalies overlying shallow and deep (nearly 600 m) orebodies. Comparatively, laboratory geo-electrochemical measurement exhibited some anomaly response for elements such as copper (Cu), silver (Ag), and zinc (Zn) above the shallow orebodies, with certain spatial deviations from the actual orebody positions. In addition, it generally represented no anomaly response above deep-seated concealed orebodies. Therefore, it can be concluded that field geo-electrochemical measurement should be prioritized in the similar exploration of landscapes, minerals, and deposits.

  • Hai WANG , Yi-Peng XU , Ai-Guo ZHAO , Sheng-Ge WANG , Peng-Xiang LIU , Peng WANG
    doi: 10.11720/wtyht.2026.1315

    The exploration areas in western piedmont zones have emerged as an important strategic replacement area for hydrocarbon exploration. However, the complex topography and structure ("dual-complexity"), along with the seismic data with low signal-to-noise ratios (SNR), severely restricted the accuracy of seismic imaging and the success rate of drilling. Therefore, it is imperative to optimize inversion technologies. This study focused on the western piedmont zone, an area characterized by complex surface geology, including hills, gravelly zones, and yardang landforms, further degrading the quality of seismic data. The existing first-arrival waveform inversion technique relies on first-arrival traveltime fitting. However, due to the near-surface heterogeneity in the western piedmont zones, this technique faces two core limitations: insufficient wavelet consistency and insufficient surface consistency. This results in inadequate accuracy of shallow velocity modeling and makes it difficult to invert the velocities of intermediate-to-deep layers using ultra-large-offset seismic data and the abundant low-frequency information contained in first-arrival waves. In contrast, reflection waveform inversion (RWI) exhibits higher adaptability to low-quality data by exploiting information of intermediate-to-deep layers in reflected waves and optimizing the objective functions accordingly. Based on this, this paper applied RWI to the survey area, aiming to enhance the accuracy of migration velocity inversion under dual-complexity conditions and to provide technical reference for improving seismic imaging quality and the detailed depiction of hydrocarbon reservoirs in western piedmont zones. Model and field tests demonstrate that the RWI can handle low-quality data in piedmont zones and improve the overall accuracy of velocities in intermediate-to-deep layers.

  • Peng ZHOU
    doi: 10.11720/wtyht.2026.1355

    Fractures serve as important seepage channels and storage spaces for hydrocarbon reservoirs. Therefore, the precise prediction of their distribution characteristics (density and orientation) holds critical significance for hydrocarbon exploration and development. However, existing fracture prediction methods using post-stack seismic data (such as coherence and curvature) cannot effectively extract azimuthal differences, thus failing to meet the demand for high-precision fracture prediction. Given this, this paper proposed a fracture prediction method by performing ellipse fitting on azimuthal attribute differences of post-stack seismic data. Specifically, the original data were optimized using structure-oriented filtering, from which three or more characteristic azimuth angles were further selected to extract azimuthal attributes. Then, the extracted attributes were analyzed using ellipse fitting to quantify attribute anisotropy. Ultimately, the fracture density and orientation were inverted using ellipse parameters (the ellipticity and major/minor axis directions). The practical application of this method in an oil field demonstrates a high coincidence between the predicted fracture density and direction and the actual drilling data, achieving superior accuracy compared to conventional fracture prediction methods. This method provides a high-precision fracture prediction solution for areas lacking wide-azimuth pre-stack seismic data.

  • Xiu-Peng SHI , Huan-Ju QIAN , Juan ZHANG
    doi: 10.11720/wtyht.2026.1283

    The river channel sand detection can provide critical insights for hydrocarbon exploration, sediment transport, and paleofluvial geomorphology analysis. However, manual identification of river channels is time-consuming, cumbersome, and subjective, while traditional river channel detection methods based on attributes such as coherence cube and curvature are susceptible to noise and faults. In contrast, owing to powerful feature extraction and efficient feature representation capabilities, deep learning has been widely applied in seismic data processing. This paper proposed a river channel detection method using 3D seismic data and attention mechanisms in convolutional neural network (CNN). The method trained the constructed network using synthetic seismic data and river channel labels, achieving effective detection of river channels from test data and actual 3D seismic data. The proposed method is of great significance for achieving efficient and automated river channel detection during actual production.

  • Jie-Dong JIN , Si-Xin LIU , Jian-Fu NI , Qi LU , Li DENG , Sen TIAN , Qian-Cheng ZHAO , Ming-Qi HU
    doi: 10.11720/wtyht.2026.1277

    Simulating the wavefield responses of a ground-penetrating radar (GPR) in the presence of a complex object using a numerical or physical model can provide critical insights for better understanding real-world GPR records and accurately identifying the object. However, current numerical simulations rely primarily on simple point source models while neglecting the physical antenna, thus failing to accurately reflect the actual conditions. Based on the gprMax software, this study delved into the response process and characteristics of the GPR signal by integrating the GPR antenna model and the real-world detection scenario. The results demonstrate that the numerical simulation incorporating the physical antenna model produced responses closer to the actual responses, providing more effective guidance compared to traditional point source simulations.

  • Xi CHEN , Zhong-Liang WU , Xiang-Chun WANG , Ming WANG , Fu-Yuan LI , Meng WANG , Jian-Ping LI , Jiang-Nan LIN
    doi: 10.11720/wtyht.2026.1276

    The ocean-bottom seismometers (OBS), a tool extensively utilized in marine geophysical exploration, hold indispensable significance for studies on the Earth's crustal structure, submarine landslide monitoring, and resource exploration. Upon OBS deployment on the ocean's surface, its final landing position typically deviates significantly from the predetermined position due to the influence of various factors. This positional deviation will severely undermine the accuracy of subsequent seismic imaging or inversion. Consequently, the OBS repositioning is necessary during data processing. This study reviewed the primary methods for OBS repositioning and applied them to the OBS data acquired in the Shenhu area, the South China Sea. Prior to data acquisition, the circuit of the data acquisition board was modified, including clock skew correction, achieving timestamp synchronization across the entire acquisition system. Building upon these enhancements, repositioning was successfully performed using the time-slice method. The repositioning results consistently satisfy the rigorous research requirements, while inverted equivalent water velocity and depth parameters demonstrate closer alignment with depth-domain imaging results derived from towed-streamer seismic surveys.

  • Zhuo-Lu WANG , Shu-Chen YU
    doi: 10.11720/wtyht.2026.1373

    Heavy metal pollution in the Qingshuitang old industrial area in Hunan province poses a high risk to human health. To investigate the migration and enrichment characteristics of heavy metals in the food chain of historical industrial and mining wastelands, this study collected 128 food chain samples comprising 16 groups corresponding to different populations. The contents of four heavy metals, including cadmium (Cd), mercury (Hg), lead (Pb), and arsenic (As), were tested in samples such as paddy soil, vegetable soil, rice, vegetables, drinking water, along with human urine and blood. Then, the migration and enrichment characteristics of heavy metals in the "soil-crop-human" food chain were investigated using the pollution index, Nemerow composite pollution index, and Pearson correlation analysis. The results show that the paddy and vegetable soils both exhibited heavy Cd pollution, heavy to moderate Pb pollution, moderate to mild As pollution, and mild Hg pollution. Overall, the paddy soil presented higher comprehensive pollution levels than the vegetable soil. Moreover, the rice displayed heavy pollution in Cd, Pb, and Hg and mild As pollution. In contrast, vegetables presented severe Cd pollution and mild pollution in Hg and As, with no Pb pollution observed. Generally, the comprehensive pollution level of rice was higher than that of vegetables. In addition, humans showed exceedances of standard limits for key biomarkers: Cd in urine (2.73 times), Cd in blood (1.73 times), and Pb in blood (2.73 times). In contrast, the As in blood and Hg in urine were generally below the clinical diagnostic limits. Significant correlations were determined between the Cd, Hg, Pb, and As contents in the "soil-crop (rice and vegetables)" and the migration and enrichment of Cd in the "crop (rice and vegetables)-human urine". However, the enrichment of Cd and Pb in human blood followed other migration pathways. No clear enrichment patterns of As and Hg were observed in the "crop (rice and vegetables)-human" transfer, indicating occasional occupational poisoning. These findings will provide a valuable reference for mitigating heavy metal pollution in industrial and mining wastelands and preventing and controlling associated human health risks.

  • Li SHI , Pan MING , Xiao-Ming GENG , Jun LU , Sheng-Xing ZHANG , Mao-Gan DONG
    doi: 10.11720/wtyht.2026.2417

    To thoroughly understand the geological characteristics of potential concealed structures in open-pit slopes induced by external factors such as mining activities and rainfall, this study conducted field detection tests on open-pit slopes using a small-loop transient electromagnetic (TEM) system. Field tests demonstrate that the small-loop TEM system exhibited excellent vertical and horizontal resolution, effectively reflecting the electrical characteristics of concealed structures within slopes and the stratification interfaces of lithospheric materials. Accordingly, the small-loop TEM system proved fast and feasible in detecting open-pit slopes. Combined with layered spatially constrained inversion (SCI) technology, surface lithosphere investigations, and geological constraints of strata, the small-loop TEM system can qualitatively and quantitatively interpret the spatial locations and general morphological characteristics of subsurface concealed structures. These interpretations allow for the inference of the material composition and structural properties of the deep lithosphere and the identification of concealed structures in advance, thereby reducing the risk of open-pit slope failure.