收藏切换
Dry Fractionation Combined with Solvent-assisted Fractionation for Process Optimization and Saturated Fatty Acid Enrichment in High-melting-point Mutton Tallow Fractions
收藏切换
Keyang ZHANG, Jintao WANG, Junfei YU, Lingyan WU, Dailin SHEN, Yan ZHANG, Zequan XU, Xin MA, Zirong WANG*
Science and Technology of Food Industry | 2026, 47(13) : 226 - 236
Less
收藏切换
Science and Technology of Food Industry | 2026, 47(13): 226-236
• Processing Technology •
Dry Fractionation Combined with Solvent-assisted Fractionation for Process Optimization and Saturated Fatty Acid Enrichment in High-melting-point Mutton Tallow Fractions
Full
Keyang ZHANG, Jintao WANG, Junfei YU, Lingyan WU, Dailin SHEN, Yan ZHANG, Zequan XU, Xin MA, Zirong WANG*
Affiliations
  • College of Food Science and Pharmacy, Xinjiang Agricultural University, Urumqi 830052, China
Published: 2026-07-01 doi: 10.13386/j.issn1002-0306.2025080245
Outline
收藏切换

To develop high value-added mutton tallow products, high-melting-point fractions were prepared from Altay sheep rump fat using a dry fractionation process combined with solvent-assisted fractionation. Solid fat yield, melting point, peroxide value, and acid value were selected as evaluation indices. Single-factor experiments were conducted to investigate the effects of various parameters on the fractionation efficiency, followed by Box-Behnken response surface design. The Analytic Hierarchy Process-Criteria Importance Through Intercriteria Correlation (AHP-CRITIC) method was applied to assign subjective and objective weights to each evaluation index, with the comprehensive score used as the response value. Physicochemical properties and fatty acid composition of the fractionated products were analyzed. The optimal conditions were determined as an oil-to-solvent ratio of 1:2, crystallization temperature of 20  °C, cooling rate of 8  °C/h, and crystallization time of 12  h. Under these conditions, the solid fat yield reached 33.23%, melting point was 50.1  °C, peroxide value was 0.02 mg/g, acid value was 0.42  mg/g, and the comprehensive score was 93.88. The high-melting-point mutton tallow fraction exhibited peroxide value, acid value, saponification value, malondialdehyde content, and iodine value of 0.025  mg/g, 0.44  mg/g, 195.38  mg/g, 1.94  nmol/mL, and 42.42  g/100 g, respectively, which were significantly lower than those of the raw tallow and the solid fat obtained by dry fractionation at 28  °C (28S) (P<0.05). The saturated fatty acid content increased from 43.94% in raw tallow to 47.8% in 28S, and further to 63.21% in the solid fat obtained by the combined fractionation method at 20  °C (20S). These results indicate that the high-melting-point fraction exhibits markedly enhanced oxidative stability and melting point, thereby improving its potential as a specialty fat. Compared with raw tallow, the saturated fatty acid content increased by 19.27% (P<0.05), providing a reference for the rational development of high-melting-point mutton tallow fractions and the enrichment process of saturated fatty acids.

sheep rump fat  /  dry fractionation combined with solvent-assisted fractionation  /  high-melting-point mutton tallow fraction  /  saturated fatty acids
张可洋, 王锦涛, 于俊飞, 吴玲艳, 申岱林, 张炎, 徐泽权, 马欣, 王子荣. 干法分提协同溶剂法分提高熔点羊油组分工艺优化及饱和脂肪酸的富集. 食品工业科技, 2026 , 47 (13) : 226 -236 . DOI: 10.13386/j.issn1002-0306.2025080245
Keyang ZHANG, Jintao WANG, Junfei YU, Lingyan WU, Dailin SHEN, Yan ZHANG, Zequan XU, Xin MA, Zirong WANG. Dry Fractionation Combined with Solvent-assisted Fractionation for Process Optimization and Saturated Fatty Acid Enrichment in High-melting-point Mutton Tallow Fractions[J]. Science and Technology of Food Industry, 2026 , 47 (13) : 226 -236 . DOI: 10.13386/j.issn1002-0306.2025080245
Year 2026 volume 47 Issue 13
129
57
Cite this Article
BibTeX
Article Info
doi: 10.13386/j.issn1002-0306.2025080245
  • Receive Date:2025-08-25
  • Online Date:2026-10-24
  • Published:2026-07-01
Article Data
Affiliations
History
  • Received:2025-08-25
Affiliations
    College of Food Science and Pharmacy, Xinjiang Agricultural University, Urumqi 830052, China
References
Share
https://castjournals.cast.org.cn/joweb/spgykj/EN/10.13386/j.issn1002-0306.2025080245
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT