The facile synthesis of highly active and stable bifunctional electrocatalysts to catalyze water splitting is attractive but challenging. Herein, we report the electrodeposition of Pt-decorated Ni(OH)₂/CeO₂ (PNC) hybrid as an efficient and robust bifunctional electrocatalyst. The graphite-supported PNC catalyst delivers superior hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) activities over the benchmark Pt/C and RuO₂, respectively. For overall water electrolysis, the PNC hybrid only requires a cell voltage of 1.45 V at 10 mA cm⁻² and sustains over 85 h at 1000 mA cm⁻². The remarkable HER/OER performances are attributed to the superhydrophilicity and multiple effects of PNC, in which Ni(OH)₂ and CeO₂ accelerate HER on Pt due to promoted water dissociation and strong electronic interaction, while the electron-pulling Ce cations facilitate the generation of high-valence Ni OER-active species. These results suggest the promising application of PNC for H₂ production from water electrolysis.

N-type Mg₃Sb_2-xBi_x alloys have been extensively studied in recent years due to their significantly enhanced thermoelectric figure of merit (zT), thus promoting them as potential candidates for waste heat recovery and cooling applications. In this review, the effects resulting from alloying Mg₃Bi₂ with Mg₃Sb₂, including narrowed bandgap, decreased effective mass, and increased carrier mobility, are summarized. Subsequently, defect-controlled electrical properties in n-type Mg₃Sb_2-xBi_x are revealed. On one hand, manipulation of intrinsic and extrinsic defects can achieve optimal carrier concentration. On the other hand, Mg vacancies dominate carrier-scattering mechanisms (ionized impurity scattering and grain boundary scattering). Both aspects are discussed for Mg₃Sb_2-xBi_x thermoelectric materials. Finally, we review the present status of, and future outlook for, these materials in power generation and cooling applications.

Conductive hydrogels with high stretchability can extend their applications as a flexible electrode in electronics, biomedicine, human-machine interfaces, and sensors. However, their time-consuming fabrication and narrow ranges of working temperature and working voltage severely limit their further potential applications. Herein, a conductive nanocomposite network hydrogel fabricated by projection microstereolithography (PμSL) based 3D printing is proposed, enabling fast fabrication ability with high precision. The 3D printed hydrogels exhibit ultra-stretchability (2500%), hyper-antifreezing (-125°C), extremely low working voltage (<100  μV), and super cyclic tensile stability (1 million cycles). The hydrogel-based strain sensor can probe both large-scale and tiny human motions, even with ultralow voltage of 100  μV at extremely low temperature around −115°C. It is demonstrated that the present hydrogels can be used as a flexible electrode for capturing human electrophysiological signals (EOG and EEG), where the alpha and beta waves from the brain can be recorded precisely. Therefore, the present hydrogels will pave the way for the development of next-generation intelligent electronics, especially for those working under extremely low-temperature environments.

Since the first successful implementation of n-type doping, low-cost Mg₃Sb_2-xBi_x alloys have been rapidly developed as excellent thermoelectric materials in recent years. An average figure of merit zT above unity over the temperature range 300–700 K makes this new system become a promising alternative to the commercially used n-type Bi₂Te_3-xSe_x alloys for either refrigeration or low-grade heat power generation near room temperature. In this review, with the structure-property-application relationship as the mainline, we first discuss how the crystallographic, electronic, and phononic structures lay the foundation of the high thermoelectric performance. Then, optimization strategies, including the physical aspects of band engineering with Sb/Bi alloying and carrier scattering mechanism with grain boundary modification and the chemical aspects of Mg defects and aliovalent doping, are extensively reviewed. Mainstream directions targeting the improvement of zT near room temperature are outlined. Finally, device applications and related engineering issues are discussed. We hope this review could help to promote the understanding and future developments of low-cost Mg₃Sb_2-xBi_x alloys for practical thermoelectric applications.

Fungal infections are everlasting health challenges all over the world, bringing about great financial and medical burdens. Here, inspired by the natural competition law of beneficial bacteria against other microbes, we present novel living microneedles (LMNs) with functionalized bacteria encapsulation for efficient fungal infection treatment. The chosen beneficial bacterial components, Bacillus subtilis (B. subtilis), which are naturally found on the human skin and widely used for food processing, can get nutrients from the skin and escape from the immune system with the help of microneedles. Besides, the encapsulated B. subtilis can continuously produce and secrete various potential antifungal agents which can directly bind to fungal cell surface-associated proteins and destruct the cell membranes, thus avoiding drug resistance. After immobilization in the LMNs, the bacteria can stay within the LMNs without invasion and the encapsulated bacteria together with microneedles can be removed after application. Thus, the side effects, especially the risk for subsequent bacterial infections, are controlled to a minimum to ensure security. In addition, strong penetrability of the microneedles enhances penetration of antifungal agents, and their heights can be adjusted according to the infected depth to acquire better therapeutic effects. These features make the LMNs potentially valuable for clinical applications.

Organic ultralong room-temperature phosphorescence (OURTP) with a long-lived triplet excited state up to several seconds has triggered widespread research interests, but most OURTP materials are excited by only ultraviolet (UV) or blue light owing to their unique stabilized triplet- and solid-state emission feature. Here, we demonstrate that near-infrared- (NIR-) excitable OURTP molecules can be rationally designed by implanting intra/intermolecular charge transfer (CT) characteristics into H-aggregation to stimulate the efficient nonlinear multiphoton absorption (MPA). The resultant upconverted MPA-OURTP show ultralong lifetimes over 0.42 s and a phosphorescence quantum yield of ~37% under both UV and NIR light irradiation. Empowered by the extraordinary MPA-OURTP, novel applications including two-photon bioimaging, visual laser power detection and excitation, and lifetime multiplexing encryption devices were successfully realized. These discoveries illustrate not only a delicate design map for the construction of NIR-excitable OURTP materials but also insightful guidance for exploring OURTP-based nonlinear optoelectronic properties and applications.

Most crystalline materials follow the guidelines of T^{-1} temperature-dependent lattice thermal conductivity ({\kappa }_L) at elevated temperatures. Here, we observe a weak temperature dependence of {\kappa }_L in Mg₃Sb₂, T^{-0.48} from theory and T^{-0.57} from measurements, based on a comprehensive study combining ab initio molecular dynamics calculations and experimental measurements on single crystal Mg₃Sb₂. These results can be understood in terms of the so-called “phonon renormalization” effects due to the strong temperature dependence of the interatomic force constants (IFCs). The increasing temperature leads to the frequency upshifting for those low-frequency phonons dominating heat transport, and more importantly, the phonon-phonon interactions are weakened. In-depth analysis reveals that the phenomenon is closely related to the temperature-induced asymmetric movements of Mg atoms within MgSb₄ tetrahedron. With increasing temperature, these Mg atoms tend to locate at the areas with relatively low force in the force profile, leading to reduced effective 3^rd-order IFCs. The locally asymmetrical atomic movements at elevated temperatures can be further treated as an indicator of temperature-induced variations of IFCs and thus relatively strong phonon renormalization. The present work sheds light on the fundamental origins of anomalous temperature dependence of {\kappa }_L in thermoelectrics.

Information encryption and decryption have attracted particular attention; however, the applications are frequently restricted by limited coding capacity due to the indistinguishable broad photoluminescence band of conventional stimuli-responsive fluorescent materials. Here, we present a concept of confidential information encryption with photoresponsive liquid crystal (LC) lasing materials, which were used to fabricate ordered microlaser arrays through a microtemplate-assisted inkjet printing method. LC microlasers exhibit narrow-bandwidth single-mode emissions, and the wavelength of LC microlasers was reversibly modulated based on the optical isomerization of the chiral dopant in LCs. On this basis, we demonstrate phototunable information authentication on LC microlaser arrays using the wavelength of LC microlasers as primary codes. These results provide enlightenment for the implementation of microlaser-based cryptographic primitives for information encryption and anticounterfeiting applications.

Physical and electronic asymmetry plays a crucial role in rectifiers and other devices with a directionally variant current-voltage (I-V) ratio. Several strategies for practically creating asymmetry in nanoscale components have been demonstrated, but complex fabrication procedures, high cost, and incomplete mechanistic understanding have significantly limited large-scale applications of these components. In this work, we present density functional theory calculations which demonstrate asymmetric electronic properties in a metal-semiconductor-metal (MSM) interface composed of stacked van der Waals (vdW) heterostructures. Janus MoSSe has an intrinsic dipole due to its asymmetric structure and, consequently, can act as either an n-type or p-type diode depending on the face at the interior of the stacked structure (SeMoS-SMoS vs. SMoSe-SMoS). In each configuration, vdW forces dominate the interfacial interactions, and thus, Fermi level pinning is largely suppressed. Our transport calculations show that not only does the intrinsic dipole cause asymmetric I-V characteristics in the MSM structure but also that different transmission mechanisms are involved across the S-S (direct tunneling) and S-Se interface (thermionic excitation). This work illustrates a simple and practical method to introduce asymmetric Schottky barriers into an MSM structure and provides a conceptual framework which can be extended to other 2D Janus semiconductors.

The parallel evolution of wearable electronics, artificial intelligence, and fifth-generation wireless technology has created a technological paradigm with the potential to change our lives profoundly. Despite this, addressing limitations linked to continuous, sustainable, and pervasive powering of wearable electronics remains a bottleneck to overcome in order to maximize the exponential benefit that these technologies can bring once synergized. A recent groundbreaking discovery has demonstrated that by using the coupling effect of contact electrification and electrostatic induction, triboelectric nanogenerators (TENGs) can efficiently convert irregular and low-frequency passive biomechanical energy from body movements into electrical energy, providing an infinite and sustainable power source for wearable electronics. A number of human motions have been exploited to properly and efficiently harness this energy potential, including human ambulation. Shoes are an indispensable component of daily wearing and can be leveraged as an excellent platform to exploit such kinetic energy. In this article, the latest representative achievements of TENG-based smart electricity-generating shoes are comprehensively reviewed. We summarize ways in which not only can biomechanical energy be scavenged via ambulatory motion, but also biomonitoring of health parameters via tracking of rhythm and strength of pace can be implemented to aid in theranostic fields. This work provides a systematical review of the rational structural design, practical applications, scenario analysis, and performance evaluation of TENG-based smart shoes for wearable electricity generation. In addition, the perspective for future development of smart electricity-generation shoes as a sustainable and pervasive energy solution towards the upcoming era of the Internet of Things is discussed.