Home Journals Articles Updates About
CN
image
收藏切换
Electrodeposition of Pt-Decorated Ni(OH)2/CeO2 Hybrid as Superior Bifunctional Electrocatalyst for Water Splitting
收藏切换
PDF
Huanhuan Liu, Zhenhua Yan, Xiang Chen, Jinhan Li, Le Zhang, Fangming Liu, Guilan Fan, Fangyi Cheng
Research. Vol 2020 Article ID 9068270
Less
收藏切换
Research. Vol 2020 Article ID 9068270
• Research Article •
Electrodeposition of Pt-Decorated Ni(OH)2/CeO2 Hybrid as Superior Bifunctional Electrocatalyst for Water Splitting
Full
Huanhuan Liu, Zhenhua Yan, Xiang Chen, Jinhan Li, Le Zhang, Fangming Liu, Guilan Fan, Fangyi Cheng
Affiliations
  • Key Laboratory of Advanced Energy Materials Chemistry (Ministry of Education), Renewable Energy Conversion and Storage Center, College of Chemistry, Nankai University, Tianjin 300071, China
About Author:

Authors’ Contributions

F. Y. Cheng and Z. H. Yan supervised the research. H. H. Liu carried out the experiments, measured and analyzed the data, and drafted the manuscript. X. Chen, J. H. Li, and L. Zhang participated in electrochemical measurements. J. H. Li, F. M. Liu, and G. L. Fan assisted material characterization and DFT calculation. All the authors participated in the discussion of results and manuscript.

Published: 2020-12-20 doi: 10.34133/2020/9068270
Outline
收藏切换

The facile synthesis of highly active and stable bifunctional electrocatalysts to catalyze water splitting is attractive but challenging. Herein, we report the electrodeposition of Pt-decorated Ni(OH)2/CeO2 (PNC) hybrid as an efficient and robust bifunctional electrocatalyst. The graphite-supported PNC catalyst delivers superior hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) activities over the benchmark Pt/C and RuO2, respectively. For overall water electrolysis, the PNC hybrid only requires a cell voltage of 1.45 V at 10 mA cm−2 and sustains over 85 h at 1000 mA cm−2. The remarkable HER/OER performances are attributed to the superhydrophilicity and multiple effects of PNC, in which Ni(OH)2 and CeO2 accelerate HER on Pt due to promoted water dissociation and strong electronic interaction, while the electron-pulling Ce cations facilitate the generation of high-valence Ni OER-active species. These results suggest the promising application of PNC for H2 production from water electrolysis.

Huanhuan Liu, Zhenhua Yan, Xiang Chen, Jinhan Li, Le Zhang, Fangming Liu, Guilan Fan, Fangyi Cheng. Electrodeposition of Pt-Decorated Ni(OH)2/CeO2 Hybrid as Superior Bifunctional Electrocatalyst for Water Splitting[J]. Research, 2020 , 2020 (12) : 9068270 - . DOI: 10.34133/2020/9068270
Full Text
Less
1. 　Introduction
Less
Hydrogen is the ideal alternative of fossil fuels as an important clean energy and industrial material [1, 2]. Water electrolysis using electricity from renewable energy is a facile and attractive technique to produce hydrogen with high purity [3, 4]. Electrocatalysts play the paramount role in overcoming the slow dynamics of both hydrogen and oxygen evolution reactions (HER and OER) [5–7]. While Pt and Ru/Ir-based compounds are highly efficient to catalyze HER and OER, respectively [8, 9], their fancy price, extremely low elemental reserves, and unsatisfactory durability limit large-scale applications [10–12], calling for strategies to improve stability and reduce noble metal loading [13–15].
In alkaline media, although Pt is the benchmarking HER catalyst, its catalytic activity is still restrained by water dissociation due to the lack of oxyphilic surfaces to cleave the O−H bond of H2O [16, 17]. The synergistic effect mechanism of Pt and Ni(OH)2 has been indicated in previous studies: Ni(OH)2 promotes the water dissociation and the generation of hydrogen atoms, which are absorbed at Pt sites nearby to recombine into hydrogen molecules [18–24]. In addition, using a bifunctional catalyst could avoid different synthetic processes of electrocatalysts and simplify the water electrolysis device to lower the cost [25]. However, Pt/Ni(OH)2 catalysts do not favor the OER due to sluggish kinetics. The electronic structure of Ni could be modulated through the integration of CeO2 in Ni(OH)2, which could further promote to form γ-NiOOH, making the Ni(OH)2/CeO2 a superb OER catalyst [26, 27]. Meanwhile, Ce can impose large electronic perturbation to Pt nanoparticles, which may enhance the HER ability of the neighboring Pt sites [28]. Therefore, the Pt-Ni(OH)2-CeO2 hybrid has great potential for electrocatalysis of both HER and OER but has not been reported previously. Besides, the Pt-based hybrid catalysts usually suffer from complicated preparation procedures, particle agglomeration, and weak adhesion between catalyst and substrate [29–31].
In this study, we report a facile electrodeposition method to synthesize ultrafine Pt nanoparticles (NPs) decorated Ni(OH)2/CeO2 nanosheets (abbreviated as PNC) via anion intercalation and cathodic electrodeposition method. The Pt NPs with an average size of 3.1 nm are homogeneously deposited on the Ni(OH)2/CeO2 (abbreviated as NC) nanosheets, which could increase the exposure area of active sites and improve the utilization of Pt. Additionally, the mosaic-structured NC nanosheets not only effectively catalyze the OER but also enhance the HER activity of Pt due to electronic modulation and promoted dissociation of water. Furthermore, anion intercalation and in situ growth of the hybrid catalyst on graphite construct interfaces with strong adhesion, resulting in efficient electron transportation and enhanced stability. As a result, the prepared PNC electrocatalyst exhibits superior activity and stability to catalyze overall water electrolysis.
2. 　Result and Discussion
Less
The PNC catalyst was synthesized through a two-step cathodic electrodeposition process as illustrated schematically in Figure 1(a). Graphite substrate was pretreated by applying a positive potential to allow nitrate ions inserting into graphite layers to enhance the interface of catalyst and graphite. The potential was reversed to realize the cathodic coelectrodeposition of cerium dioxide and nickel hydroxide on graphite. Subsequently, Pt NPs were deposited on the NC nanosheets to obtain the PNC hybrid electrode. In this two-step deposition process, the Pt loading can be reduced and the exposure of Pt is increased to enhance the utilization of Pt, outperforming the reverse sequence when Pt is deposited prior to transition metal hydroxide. The involved reactions in the preparation of PNC are described by equations (1)–(4). For comparison, Pt/G and Pt-Ni(OH)2 (abbreviated as PN) electrodes were obtained through a similar process.
(1)NO3−+H2O+2e−⟶2OH−+NO2−(2)Ni2++2OH−⟶NiOH2↓(3)4Ce3++12OH−+O2⟶4CeO2↓+6H2O(4)PtCl62−+2H2O⟶Pt↓+4H++6Cl−+O2↑
Figure 1(b) shows the X-ray diffraction (XRD) patterns of the prepared Pt, PN, and PNC. In addition to the reflections of graphite substrate, the diffraction peaks centered at 2θ of 40.0 and 46.5° correspond to the (111) and (200) planes of the face-centered cubic (fcc) Pt (space group of Fm-3m), respectively. The Ni(OH)2 and CeO2 signals are not observed in XRD because of weak crystalline state of Ni(OH)2 and low content of CeO2 (supplementary Figure S1). The morphology and microstructure were investigated by a scanning electron microscope (SEM) and transmission electron microscope (TEM). The prepared PN and PNC are composed of aggregated nanoparticles with interparticle pores and flat nanosheets with a thickness of 5–10 nm, while the control Pt/G is granular (Figure 1(c) inset and supplementary Figure S2). This rimous texture and interlinked lamellar morphology would facilitate the penetration of electrolyte inside the electrode and increase the active site exposure area. Contact angle tests indicate superhydrophilic property of PNC (supplementary Figure S3), which can be attributed to the rimous texture and the presence of O−H bond in hydroxide nanosheets. TEM images (Figure 1(c) and supplementary Figure S4) show uniform dispersion of Pt NPs on the hydroxide support. The average size of Pt NPs is 3.1 nm in PNC, smaller than PN (3.4 nm) and Pt/G (13.2 nm). The superhydrophilic surfaces of NC favor the nucleation and growth of Pt, leading to smaller NPs and uniform distribution [32, 33]. The high dispersion of Pt NPs on the mosaic structure of CeO2 and the weak crystallinity of Ni(OH)2 would enrich the interface between metal and oxide/hydroxide. High-resolution TEM (HRTEM) reveals lattice spacings of 0.314 and 0.227 nm (Figure 1(d)), which are separately assigned to the (111) planes of fcc CeO2 and fcc Pt. Energy dispersive spectroscopy (EDS) mapping further confirms the homogenous distribution of Pt, Ni, Ce, and O in PNC (supplementary Figure S5). As detected by EDS and inductively coupled plasma atomic emission spectroscopy (ICP-AES) (supplementary Figure S6), the Pt loadings are 8.8 and 8.2 wt.% in PN and PNC, respectively. The Pt content could be tuned by adjusting the electrodeposition time in H2PtCl6 solution (supplementary Table S1).
The oxidation states of Pt, Ni(OH)2, and CeO2were detected by X-ray photoelectron spectroscopy (XPS) spectra (Figure 2). The survey spectra confirm the presence of Pt, Ni, and O in PN and additional Ce in PNC (Figure 2(a)). As shown in Figure 2(b), Pt 4f spectra display two pairs of peaks (4f7/2 and 4f5/2), corresponding to dominant Pt(0) (75.9%) and surface Pt(II) (24.1%) in PNC. For PN, the atomic ratio of Pt(0) and Pt(II) is 90.7% and 9.3%, respectively. The higher Pt(II) content and 0.3 eV positive shift of Pt(0) peaks in PNC compared to PN suggest partial oxidation of Pt and electronic interaction between Pt and NC [28, 34, 35]. The peak shift also indicates a downshift of the d-band center of Pt in PNC, which could favor hydrogen adsorption on Pt and accelerate the recombination of Had to form H2 [36–38].
As discerned by Ni 2p XPS spectra (Figure 2(c)), both Ni (II) (855.6 eV) and Ni (III) (857.1 and 856.8 eV) exist in PNC and PN. There is a 0.3 eV positive shift of Ni(III) in PNC, indicating electron transfer from Ni to Ce. The electron-pulling ability of ceria would accelerate the generation of NiOOH active sites for OER. In addition, the coexistence of Ni 3p peak in the Pt 4f region confirms Ni(II) species in Ni(OH)2 [39]. The O 1s spectrum (Figure 2(d)) of PNC shows deconvoluted peaks at 528.6, 530.5, 531.6, and 532.6 eV assigned to CeO2, Ni(OH)2, NiOOH, and H2O, respectively [26, 40]. Collecting XPS results suggest strong electron interaction and synergy effect between Pt and Ce-Ni oxide/hydroxide in PNC, which would favor the formation of more electrocatalytically active species [26, 41].
The electrocatalytic HER performances were investigated by linear sweep voltammetry (LSV). As shown in Figure 3(a), the onset potential of PNC is near 0 mV and it needs only 76 mV overpotential at 100 mA cm−2, significantly outperforming PN (105 mV), Pt/G (124 mV), and 20 wt.% Pt/C (153 mV). At a high applied current density, rapid generation and release of bubbles occur while no catalyst desquamating from the electrode surface is observed for PNC (supplementary Movie S1). The results indicate superior mechanical stability of the electrodeposited hybrid material, which is favorable for industrial application operating under large current density.
Tafel slope is a figure-of-merit to assess HER kinetics of electrocatalysts. In Figure 3(b), the PNC represents a Tafel slope of 38 mV dec−1, which is much smaller than PN, Pt/C, and Pt/G (45, 56, and 58 mV dec−1) and indicates rapid HER kinetics in PNC (Tafel-Volmer mechanism). The HER process in alkaline condition includes the Volmer adsorption step (H2O+e−⟶Had+OH−) combined with the Heyrovsky desorption step (Had+H2O+e−⟶H2+OH−) or the Tafel recombination step (Had+Had⟶H2) [42, 43]. In alkaline media, the Volmer step is suggested to determine the HER rate of Pt, due to the sluggish dissociation of water [44, 45]. For the PNC hybrid, the metal (hydro)oxides are efficient to split O−H bond and accelerate the Volmer step, leading to an improvement in HER kinetics. The electrode kinetics of the HER process is further investigated by conducting the EIS experiments, where the equivalent circuit was composed of an electrolyte resistance (Rs) in series with a parallel connection of a constant phase element (CPE) and a charge-transfer resistance (Rct) [46]. From the Nyquist plots (Figure 3(c)) recorded at the potential of −0.026 V vs. RHE, PNC has a smaller Rct compared to Pt/C, Pt/G, and PN. The enhanced charge transfer is attributed to the interfacial electron interaction, plate-like nanostructure with shorter diffusion pathway, and rimous texture that allows facile electrolyte access.
The mass activities were calculated to evaluate the utilization ratio of Pt in the catalysts (Figure 3(d)). At the overpotential of 150 mV, the PNC electrode achieves a remarkable current density of 3.144 A mg−1Pt, which is almost 10 and 1.6 times those of the counterpart 20 wt.% Pt/C and PN (0.316 and 2.011 A mg−1Pt). The improvement of the mass activity of Pt could be ascribed to the high dispersion and ultrafine particle of Pt. The highest HER activities of PN and PNC are attained when the Pt mass loadings are 8.8 wt.% and 8.2 wt.%, respectively (supplementary Figure S7). Moreover, cyclic voltammetry (CV) curves at different scan rates are measured to obtain the electrochemical double-layer capacitance (Cdl) for evaluating the electrochemical active surface areas (ECSAs) (supplementary Figure S8). The current densities are normalized by ECSA or mass of the catalyst to determine specific activity or mass activity at an overpotential of 150 mV. Clearly, PNC delivers overwhelming values as compared to PN, Pt/C, and Pt/G (supplementary Figure S9). The intrinsic catalytic activity can be further evaluated by the turnover frequency (TOF) [47]. Assuming Pt as HER active site, the calculated TOF of PNC is 3.488 s−1 at overpotential of 150 mV, significantly outperforming PN (2.127 s−1), Pt/G (0.254 s−1), and Pt/C (0.455 s−1) (Figure 3(e)). Besides, PNC exhibits superior HER performance as compared with those of previously reported electrocatalysts (supplementary Table S2).
The long-term catalytic durability was investigated by CV sweeping for 1000 cycles, indicating negligible activity loss of the PNC electrode. The overpotential only slightly increases by 21 mV at 1000 mA cm−2, surpassing that of Pt/C (116 mV) (Figure 3(f) and supplementary Figure S10). The catalytic stability of PNC was further tested by chronopotentiometry at a large current density of 1000 mA cm−2. As shown in Figure 3(f) inset, PNC shows only a very small increase of overpotential after 70 h test, while Pt/C experiences an apparent increase in polarization. Microscopy imaging on cycled electrode reveals that PNC retains its texture and morphology without noticeable particle agglomeration or inhomogeneous elemental distribution, irrespective of a particle size increase of Pt NPs from 3.1 to 5.6 nm (Supplementary Figure S11). Furthermore, the XRD analysis suggests no phase change, while the XPS results show essentially preservation of the oxidation states of Pt and Ce states but an increase in the proportion of Ni (II) species (supplementary Figure S12). The confinement of Pt NPs in hydroxide and the firm adhesion of electrodeposit on graphite could account for the remarkable catalytic and structural stability at large current density.
The OER performances were also assessed by LSV curves (Figure 4(a)). The PNC exhibits a lower overpotential of 186 mV (100 mA cm−2), as compared to PN (279 mV), RuO2 (321 mV), and Pt/G (1094 mV). The current fluctuation in the LSV curves of RuO2 results from the formation of large O2 bubbles. Differently, PNC manifests enhanced and stable OER performance without rigorous fluctuation or large bubble generation at high current density (supplementary Movie S2). Furthermore, the Tafel slope of PNC is 54 mV dec−1, lower than that of PN (63 mV dec−1), RuO2 (71 mV dec−1), and Pt/G (95 mV dec−1) (Figure 4(b)). Remarkably, the OER activity of PNC is among the highest referencing results (supplementary Table S3).
Figure 4(c) shows the EIS data to assess the OER kinetics. At the potential of 1.474 V vs. RHE, a much lower Rct value (1.4  Ω) was obtained on PNC, in comparison to PN (3.7  Ω), Pt/G (18.4  Ω), and RuO2 (3.1  Ω). Continuous CV sweeping was tested to investigate the OER durability of PNC (Figure 4(d)). The OER overpotential at 1000 mA cm−2 increases only 12 mV after 1000 cycles, revealing insignificant change as compared with RuO2 (343 mV) (supplementary Figure S13). In addition, the chronopotentiometric response (Figure 4(d) inset) shows unconspicuous decay at 1000 mA cm−2 for 70 h, further indicating superior OER catalytic stability of PNC. A combination of SEM, TEM, EDS, and XRD characterizations indicates no apparent change in morphology, composition, and phase but a slight increase of particle size after extended OER electrocatalysis on PNC (supplementary Figures S14 and 15). Of note is that an increased ratio of NiOOH, which has been regarded as the active center of OER [26, 48], can be analyzed by XPS results (supplementary Figure S15d).
Based on the excellent performances of PNC for both the HER and the OER, a symmetric two-electrode cell was constructed using PNC as a bifunctional electrode for water electrolysis. As shown in Figure 5(a), the cell delivers a current density of 10 mA cm−2 at an applied voltage of 1.5 V, 100 mV lower than that of the benchmark Pt/C || RuO2 couple (1.55 V). The PNC hybrid competes favorably with most electrocatalysts reported previously for overall water splitting (supplementary Table S4). Remarkably, in the extended stability test at a large current density of 1000 mA cm−2, a constant potential of 2.06 V can be well maintained for 85 h with the faintest degradation (Figure 5(b)). A large amount of bubbles release uniformly from the electrode surfaces without any shedding (supplementary Movie S3). Moreover, the volumes of collected H2 and O2 match well with the theoretical values as a function of time during electrolysis at 1000 mA cm−2 (supplementary Figure S16), indicating nearly 100% faradaic efficiency of PNC || PNC electrolyzer. Excitingly, the PNC-based device can be actuated by a 1.5 V battery for vigorous, stable generation, and release of gas (supplementary Figure S17 and Movie S3), again confirming the high efficiency of PNC to electrolyze water.
Figure 5(c) schematically shows the reaction mechanism of the electrolyzer. We propose that metal hydroxide in PNC promotes the rupture of O−H in water and the generation of adsorbed H atoms (Hads), which adsorb on the Pt surface to recombine into hydrogen molecule. Meanwhile, the OH− ions are transformed into O2 on the anode with different metal centers [22, 26, 49]. To gain further insight into the water dissociation process, we performed preliminary DFT calculations on the configuration and evolution of PNC hybrid and dissociation energy of H2O on the interface (Figure 5(d) and supplementary Movie S4). The water is adsorbed at the interface of Ni(OH)2 and CeO2, where O is connected with the Ni atom in Ni(OH)2 and H forms a weak hydrogen bond interaction with O in CeO2. These interactions jointly promote the activation of water, resulting in the fracture of O−H bond in water and the formation of the final structure in Figure 5(d). The process is exothermic (about −2.74 eV), indicating that water dissociation can proceed spontaneously at this interface. Accordingly, the superior performance of PNC can be attributed to the synergistic effect among Pt, Ni(OH)2, and CeO2 in the hybrid, together with the beneficial texture, microstructure, and wettability.
3. 　Conclusion
Less
In summary, we report the electrodeposition of Pt-Ni(OH)2-CeO2 hybrid on graphite and its application for efficient electrocatalysis of water splitting. In 1.0 M KOH, the PNC electrode needs only overpotentials of 76 and 186 mV to afford 100 mA cm−2 current density for HER and OER, respectively. The turn over frequency and Pt-based mass activity towards HER are significantly improved on PNC than the benchmark Pt/C. Remarkably, when PNC electrode is directly utilized as the anode and cathode, the assembled symmetric water electrolyzer well works at a low applied cell voltage of 1.45 V. Additionally, respectable stability of PNC is attained at 1000 mA cm−2. The superior activity is due to high dispersion of Pt NPs and electronic interaction among Pt, Ni(OH)2, and CeO2 while the durability is ascribed to strong deposit/graphite adherence, electrode hydrophilicity, and facilitated release of gas bubbles. The results indicate that Pt-decorated hydroxide/oxide electrodeposited on graphite is a promising electrocatalyst for overall water electrolysis.
4. 　Materials and Methods
Less
4.1. 　Material Synthesis
To prepare the PNC hybrid, cathodic galvanostatic electrodeposition was applied and performed using a two-electrode system in a 50 ml electrolytic bath at 25°C. The working and counter electrode are two graphite plates (1×2 cm) [26]. The graphite plate was first preprocessed by applying an anodic current of 20 mA cm−2 for 300 s to realize NO3− intercalation in the interlamination. Then, a cathodic current of −20 mA cm−2 was applied for 300 s in a nitrate solution containing 0.09 M Ni(NO3)2 and 0.01 M Ce(NO3)3. After that, cathodic depositions at −20 mA cm−2 were performed for different time (50, 100, 150, and 200 s) in 0.02 M H2PtCl6 solution. For comparison, PN was obtained from electrodeposition in 0.1 M Ni(NO3)2 and 0.02 M H2PtCl6 using a similar process, while Pt/G was prepared in 0.02 M H2PtCl6 at 20 mA cm−2 for 300 s.
4.2. 　Material Characterizations
A JEOL JSM-7500F microscope was used to obtain SEM images. TEM and HRTEM were carried out on a FEI Talos F200X G2 system equipped with EDS. A Rigaku MiniFlex 600 diffractometer was used to measure the XRD patterns. XPS data were collected with a Kratos Axis Ultra DLD spectrometer. Elemental analysis was obtained on ICP-AES (PerkinElmer Optima 83000).
4.3. 　Electrochemical Measurements
All electrochemical tests were tested by a three-electrode system on AMETEK Parstat 4000 electrochemical workstation in 1.0 M KOH. The electrodeposited electrodes, Hg/HgO, and graphite rod were employed as the working, reference, and counter electrode, respectively. To study the HER performance, LSV curves were tested at 10 mV s−1 from −0.8 to −1.6 V vs. Hg/HgO. The OER activity was tested from 0 to 2.0 V vs. Hg/HgO. To test EIS, the frequency range is set from 100 kHz to 0.01 Hz. Water electrolysis was detected in a two-electrode system, and LSV curves were measured from 1.0 to 2.0 V at 10 mV s−1. Potentials were reported versus reversible hydrogen electrode (RHE) unless noted, in line with the equation E RHE=0.924 V+E Hg/HgO. All LSV curves have been iR corrected unless otherwise specified.
The Cdl values were determined from the double layer region (without faradaic processes) in the CV curves recorded at different scan rates. The ECSA of the prepared catalysts was calculated according to
(5)ECSA=CdlCs,
where Cdl is the double-layer capacitance and Cs is the specific capacitance (0.040 mF cm−2) [50].
The TOF was determined by the following equation [51, 52]:
(6)TOF=J×A2×F×m,
where J is the current density at a given overpotential (150 mV), F is the Faraday constant (96,485 C mol−1), A is the electrode surface area (1 cm2), and m is the number of moles of active species on the electrode. The Pt content in PN and PNC was quantified by ICP-AES. In TOF calculation, Pt atoms are counted as the active sites in PN and PNC.
4.4. 　DFT Calculation
Density function theory calculation was performed by using the CP2K package [53]. PBE functional [54] with Grimme D3 correction [55] was used to describe the system. Unrestricted Kohn-Sham DFT has been used as the electronic structure method in the framework of the Gaussian and plane wave method [56, 57]. The Goedecker-Teter-Hutter (GTH) pseudopotentials [58, 59] and DZVPMOLOPT-GTH basis sets [56] were utilized to describe the molecules. A plane-wave energy cut-off of 500 Ry has been employed.
Funding
Less
  • Fundamental Research Funds for the Central Universities
  • NCC Fund(NCC2020FH03)
  • Ministry of Education of the People's Republic of China(B12015)
  • Tianjin Project(18JCZDJC31100)
  • Ministry of Science and Technology(2018YFB1502100)
  • National Natural Science Foundation of China(51571125; 52001171; 21871149)
References
Less
1
Service R. F., “The hydrogen backlash,” Science, vol. 305, no. 5686, pp. 958–961, 2004
2
Joya K. S., Joya Y. F., Ocakoglu K., and van de Krol R., “Water-splitting catalysis and solar fuel devices: artificial leaves on the move,” Angewandte Chemie International Edition, vol. 52, no. 40, pp. 10426–10437, 2013
3
McCrory C. C. L., Jung S., Ferrer I. M., Chatman S. M., Peters J. C., and Jaramillo T. F., “Benchmarking hydrogen evolving reaction and oxygen evolving reaction electrocatalysts for solar water splitting devices,” Journal of the American Chemical Society, vol. 137, no. 13, pp. 4347–4357, 2015
4
Wu L., Yu L., Xiao X., Zhang F., Song S., Chen S., and Ren Z., “Recent advances in self-supported layered double hydroxides for oxygen evolution reaction,” Research, vol. 2020, article 3976278, –17, 2020
5
Jiang N., You B., Sheng M., and Sun Y., “Electrodeposited cobalt-phosphorous-derived films as competent bifunctional catalysts for overall water splitting,” Angewandte Chemie International Edition, vol. 54, no. 21, pp. 6251–6254, 2015
6
Gao Q., Wu R., Liu Y., Zheng Y. R., Li Y., Shang L. M., Ju Y. M., Gu C., Zheng X. S., Liu J. W., Zhu J. F., Gao M. R., and Yu S. H., “Synthesis of PdSx-mediated polydymite heteronanorods and their long-range activation for enhanced water electroreduction,” Research, vol. 2019, article 8078549, –11, 2019
7
Sun H., Xu X., Yan Z., Chen X., Cheng F., Weiss P. S., and Chen J., “Porous multishelled Ni2P hollow microspheres as an active electrocatalyst for hydrogen and oxygen evolution,” Chemistry of Materials, vol. 29, no. 19, pp. 8539–8547, 2017
8
Lee Y., Suntivich J., May K. J., Perry E. E., and Shao-Horn Y., “Synthesis and activities of rutile IrO2 and RuO2 nanoparticles for oxygen evolution in acid and alkaline solutions,” Journal of Physical Chemistry Letters, vol. 3, no. 3, pp. 399–404, 2012
9
Zhao X., Meng J., Yan Z., Cheng F., and Chen J., “Nanostructured NiMoO4 as active electrocatalyst for oxygen evolution,” Chinese Chemical Letters, vol. 30, no. 2, pp. 319–323, 2019
10
Zhu H., Zhang J., Yanzhang R., du M., Wang Q., Gao G., Wu J., Wu G., Zhang M., Liu B., Yao J., and Zhang X., “When cubic cobalt sulfide meets layered molybdenum disulfide: a core–shell system toward synergetic electrocatalytic water splitting,” Advanced Materials, vol. 27, no. 32, pp. 4752–4759, 2015
11
Shi H., Zhou Y. T., Yao R. Q., Wan W. B., Zhang Q. H., Gu L., Wen Z., Lang X. Y., and Jiang Q., “Intermetallic Cu5Zr clusters anchored on hierarchical nanoporous copper as efficient catalysts for hydrogen evolution reaction,” Research, vol. 2020, article 2987234, –12, 2020
12
Sun H., Xu X., Yan Z., Chen X., Jiao L., Cheng F., and Chen J., “Superhydrophilic amorphous Co–B–P nanosheet electrocatalysts with Pt-like activity and durability for the hydrogen evolution reaction,” Journal of Materials Chemistry A, vol. 6, no. 44, pp. 22062–22069, 2018
13
Subbaraman R., Tripkovic D., Chang K. C., Strmcnik D., Paulikas A. P., Hirunsit P., Chan M., Greeley J., Stamenkovic V., and Markovic N. M., “Trends in activity for the water electrolyser reactions on 3d M(Ni,Co,Fe,Mn) hydr(oxy)oxide catalysts,” Nature Materials, vol. 11, no. 6, pp. 550–557, 2012
14
Zheng X., Zhang B., de Luna P., Liang Y., Comin R., Voznyy O., Han L., García de Arquer F. P., Liu M., Dinh C. T., Regier T., Dynes J. J., He S., Xin H. L., Peng H., Prendergast D., du X., and Sargent E. H., “Theory-driven design of high-valence metal sites for water oxidation confirmed using in situ soft X-ray absorption,” Nature Chemistry, vol. 10, no. 2, pp. 149–154, 2018
15
Dionigi F., and Strasser P., “NiFe-based (oxy)hydroxide catalysts for oxygen evolution reaction in non-acidic electrolytes,” Advanced Energy Materials, vol. 6, no. 23, article 1600621, 2016
16
Conway B. E., and Jerkiewicz G., “Nature of electrosorbed H and its relation to metal dependence of catalysis in cathodic H2 evolution,” Solid State Ionics, vol. 150, no. 1-2, pp. 93–103, 2002
17
Ruqia B., and Choi S. L., “Pt and Pt–Ni(OH)2 Electrodes for the hydrogen evolution reaction in alkaline electrolytes and their nanoscaled electrocatalysts,” ChemSusChem, vol. 11, no. 16, pp. 2643–2653, 2018
18
Strmcnik D., Lopes P. P., Genorio B., Stamenkovic V. R., and Markovic N. M., “Design principles for hydrogen evolution reaction catalyst materials,” Nano Energy, vol. 29, pp. 29–36, 2016
19
Wang G., Parrondo J., He C., Li Y., and Ramani V., “Pt/C/Ni(OH)2 Bi-Functional electrocatalyst for enhanced hydrogen evolution reaction activity under alkaline conditions,” Journal of the Electrochemical Society, vol. 164, no. 13, pp. F1307–F1315, 2017
20
Wang L., Zhu Y., Zeng Z., Lin C., Giroux M., Jiang L., Han Y., Greeley J., Wang C., and Jin J., “Platinum−nickel hydroxide nanocomposites for electrocatalytic reduction of water,” Nano Energy, vol. 31, pp. 456–461, 2017
21
Yin H., Zhao S., Zhao K., Muqsit A., Tang H., Chang L., Zhao H., Gao Y., and Tang Z., “Ultrathin platinum nanowires grown on single-layered nickel hydroxide with high hydrogen evolution activity,” Nature Communications, vol. 6, no. 1, article 6430, 2015
22
Subbaraman R., Tripkovic D., Strmcnik D., Chang K. C., Uchimura M., Paulikas A. P., Stamenkovic V., and Markovic N. M., “Enhancing hydrogen evolution activity in water splitting by tailoring Li+−Ni(OH)2−Pt interfaces,” Science, vol. 334, no. 6060, pp. 1256–1260, 2011
23
Wang Y., Chen L., Yu X., Wang Y., and Zheng G., “Superb alkaline hydrogen evolution and simultaneous electricity generation by Pt-decorated Ni3N nanosheets,” Advanced Energy Materials, vol. 7, no. 2, article 1601390, 2017
24
Chen C., Kang Y., Huo Z., Zhu Z., Huang W., Xin H. L., Snyder J. D., Li D., Herron J. A., Mavrikakis M., Chi M., More K. L., Li Y., Markovic N. M., Somorjai G. A., Yang P., and Stamenkovic V. R., “Highly crystalline multimetallic nanoframes with three-dimensional electrocatalytic surfaces,” Science, vol. 343, no. 6177, pp. 1339–1343, 2014
25
Zhu Y., Zhou W., Zhong Y., Bu Y., Chen X., Zhong Q., Liu M., and Shao Z., “A perovskite nanorod as bifunctional electrocatalyst for overall water splitting,” Advanced Energy Materials, vol. 7, no. 8, article 1602122, 2017
26
Yan Z., Sun H., Chen X., Liu H., Zhao Y., Li H., Xie W., Cheng F., and Chen J., “Anion insertion enhanced electrodeposition of robust metal hydroxide/oxide electrodes for oxygen evolution,” Nature Communications, vol. 9, no. 1, article 2373, 2018
27
Fan G., Sun H., Cheng F., and Chen J., “Progress in DFT study on 3d transition metal oxide/hydroxide electrocatalyst for oxygen evolution,” Scientia Sinica Chimica, vol. 49, no. 5, pp. 741–751, 2019
28
Bruix A., Rodriguez J. A., Ramírez P. J., Senanayake S. D., Evans J., Park J. B., Stacchiola D., Liu P., Hrbek J., and Illas F., “A new type of strong metal-support interaction and the production of H2 through the transformation of water on Pt/CeO2(111) and Pt/CeOx/TiO2(110) catalysts,” Journal of the American Chemical Society, vol. 134, no. 21, pp. 8968–8974, 2012
29
Park J., Wang H., Vara M., and Xia Y., “Platinum cubic nanoframes with enhanced catalytic activity and durability toward oxygen reduction,” ChemSusChem, vol. 9, no. 19, pp. 2855–2861, 2016
30
Jung E., Park H. Y., Cho A., Jang J. H., Park H. S., and Yu T., “Aqueous-phase synthesis of metal hydroxide nanoplates and platinum/nickel hydroxide hybrid nanostructures and their enhanced electrocatalytic properties,” Applied Catalysis B: Environmental, vol. 225, pp. 238–242, 2018
31
Kavian R., Choi S. I., Park J., Liu T., Peng H. C., Lu N., Wang J., Kim M. J., Xia Y., and Lee S. W., “Pt−Ni octahedral nanocrystals as a class of highly active electrocatalysts toward the hydrogen evolution reaction in an alkaline electrolyte,” Journal of Materials Chemistry A, vol. 4, no. 32, pp. 12392–12397, 2016
32
Liu Y., Hangarter C. M., Garcia D., and Moffat T. P., “Self-terminating electrodeposition of ultrathin Pt films on Ni: an active, low-cost electrode for H2 production,” Surface Science, vol. 631, pp. 141–154, 2015
33
Zhou Y., Perket J. M., and Zhou J., “Growth of Pt nanoparticles on reducible CeO2(111) thin films: effect of nanostructures and redox properties of ceria,” Journal of Physical Chemistry C, vol. 114, no. 27, pp. 11853–11860, 2010
34
Feng H., Xu Z., Ren L., Liu C., Zhuang J., Hu Z., Xu X., Chen J., Wang J., Hao W., du Y., and Dou S. X., “Activating titania for efficient electrocatalysis by vacancy engineering,” ACS Catalysis, vol. 8, no. 5, pp. 4288–4293, 2018
35
Zheng X., Cui P., Qian Y., Zhao G., Zheng X., Xu X., Cheng Z., Liu Y., Dou S. X., and Sun W., “Multifunctional active-center-transferable platinum/lithium cobalt oxide heterostructured electrocatalysts towards superior water splitting,” Angewandte Chemie International Edition, vol. 59, no. 34, pp. 14533–14540, 2020
36
Lao M., Rui K., Zhao G., Cui P., Zheng X., Dou S. X., and Sun W., “Platinum/nickel bicarbonate heterostructures towards accelerated hydrogen evolution under alkaline conditions,” Angewandte Chemie International Edition, vol. 58, no. 16, pp. 5432–5437, 2019
37
Cheng X., Li Y., Zheng L., Yan Y., Zhang Y., Chen G., Sun S., and Zhang J., “Highly active, stable oxidized platinum clusters as electrocatalysts for the hydrogen evolution reaction,” Energy & Environmental Science, vol. 10, no. 11, pp. 2450–2458, 2017
38
Stamenkovic V. R., Mun B. S., Arenz M., Mayrhofer K. J. J., Lucas C. A., Wang G., Ross P. N., and Markovic N. M., “Trends in electrocatalysis on extended and nanoscale Pt-bimetallic alloy surfaces,” Nature Materials, vol. 6, no. 3, pp. 241–247, 2007
39
Ji J., Zhang L. L., Ji H., Li Y., Zhao X., Bai X., Fan X., Zhang F., and Ruoff R. S., “Nanoporous Ni(OH)2 thin film on 3D ultrathin-graphite foam for asymmetric supercapacitor,” ACS Nano, vol. 7, no. 7, pp. 6237–6243, 2013
40
Mansour A. N., and Melendres C. A., “Characterization of α-Ni(OH)2 by XPS,” Surface Science Spectra, vol. 3, no. 3, pp. 255–262, 1994
41
Tang T., Jiang W. J., Niu S., Liu N., Luo H., Chen Y. Y., Jin S. F., Gao F., Wan L. J., and Hu J. S., “Electronic and morphological dual modulation of cobalt carbonate hydroxides by Mn doping toward highly efficient and stable bifunctional electrocatalysts for overall water splitting,” Journal of the American Chemical Society, vol. 139, no. 24, pp. 8320–8328, 2017
42
Liu Y., Li Q., Si R., Li G. D., Li W., Liu D. P., Wang D., Sun L., Zhang Y., and Zou X., “Coupling sub-nanometric copper clusters with quasi-amorphous cobalt sulfide yields efficient and robust electrocatalysts for water splitting reaction,” Advanced Materials, vol. 29, no. 13, article 1606200, 2017
43
Ma X., Zhang W., Deng Y., Zhong C., Hu W., and Han X., “Phase and composition controlled synthesis of cobalt sulfide hollow nanospheres for electrocatalytic water splitting,” Nanoscale, vol. 10, no. 10, pp. 4816–4824, 2018
44
Bockris J. O.'. M., “The origin of ideas on a hydrogen economy and its solution to the decay of the environment,” International Journal of Hydrogen Energy, vol. 27, no. 7-8, pp. 731–740, 2002
45
Durst J., Siebel A., Simon C., Hasché F., Herranz J., and Gasteiger H. A., “New insights into the electrochemical hydrogen oxidation and evolution reaction mechanism,” Energy and Environmental Science, vol. 7, no. 7, pp. 2255–2260, 2014
46
Long X., Li G., Wang Z., Zhu H. Y., Zhang T., Xiao S., Guo W., and Yang S., “Metallic iron−nickel sulfide ultrathin nanosheets as a highly active electrocatalyst for hydrogen evolution reaction in acidic media,” Journal of the American Chemical Society, vol. 137, no. 37, pp. 11900–11903, 2015
47
Zou X., and Zhang Y., “Noble metal-free hydrogen evolution catalysts for water splitting,” Chemical Society Reviews, vol. 44, no. 15, pp. 5148–5180, 2015
48
Lee S., Banjac K., Lingenfelder M., and Hu X., “Oxygen isotope labeling experiments reveal different reaction sites for the oxygen evolution reaction on nickel and nickel iron oxides,” Angewandte Chemie International Edition, vol. 58, no. 30, pp. 10295–10299, 2019
49
Thiel P. A., and Madey T. E., “The interaction of water with solid surfaces: fundamental aspects,” Surface Science Reports, vol. 46, no. 1-8, pp. 1–308, 2002
50
Niu S., Jiang W. J., Tang T., Yuan L. P., Luo H., and Hu J. S., “Autogenous growth of hierarchical NiFe(OH)x/FeS nanosheet-on-microsheet arrays for synergistically enhanced high-output water oxidation,” Advanced Functional Materials, vol. 29, no. 36, p. 1902180, 2019
51
Lu X., and Zhao C., “Electrodeposition of hierarchically structured three-dimensional nickel−iron electrodes for efficient oxygen evolution at high current densities,” Nature Communications, vol. 6, no. 1, article 6616, 2015
52
Zhang L., Yan Z., Chen X., Yu M., Liu F., Cheng F., and Chen J., “Facile synthesis of amorphous MoSx-Fe anchored on Zr-MOFs towards efficient and stable electrocatalytic hydrogen evolution,” Chemical Communications, vol. 56, no. 18, pp. 2763–2766, 2020
53
Hutter J., Iannuzzi M., Schiffmann F., and VandeVondele J., “Cp2k: atomistic simulations of condensed matter systems,” Wiley Interdisciplinary Reviews: Computational Molecular Science, vol. 4, no. 1, pp. 15–25, 2014
54
Perdew J. P., Burke K., and Ernzerhof M., “Generalized gradient approximation made simple,” Physical Review Letters, vol. 77, no. 18, pp. 3865–3868, 1996
55
Grimme S., “Semiempirical gga-type density functional constructed with a long-range dispersion correction,” Journal of Computational Chemistry, vol. 27, no. 15, pp. 1787–1799, 2006
56
VandeVondele J., and Hutter J., “Gaussian basis sets for accurate calculations on molecular systems in gas and condensed phases,” The Journal of Chemical Physics, vol. 127, no. 11, article 114105, 2007
57
VandeVondele J., Krack M., Mohamed F., Parrinello M., Chassaing T., and Hutter J., “Quickstep: fast and accurate density functional calculations using a mixed gaussian and plane waves approach,” Computer Physics Communications, vol. 167, no. 2, pp. 103–128, 2005
58
Goedecker S., Teter M., and Hutter J., “Separable dual-space Gaussian pseudopotentials,” Physical Review B, vol. 54, no. 3, pp. 1703–1710, 1996
59
Hartwigsen C., Goedecker S., and Hutter J., “Relativistic separable dual-space Gaussian pseudopotentials from H to Rn,” Physical Review B, vol. 58, no. 7, pp. 3641–3662, 1998
Appendix
Less
Year 2020 volume 2020 Issue 12
PDF
51
28
Cite this Article
BibTeX
Article Info
doi: 10.34133/2020/9068270
  • Receive Date：2020-08-21
  • Online Date：2026-10-27
  • Published：2020-12-20
Article Data
Affiliations
History
  • Received：2020-08-21
  • Accepted：2020-10-27
Funding
Fundamental Research Funds for the Central Universities
NCC Fund(NCC2020FH03)
Ministry of Education of the People's Republic of China(B12015)
Tianjin Project(18JCZDJC31100)
Ministry of Science and Technology(2018YFB1502100)
National Natural Science Foundation of China(51571125; 52001171; 21871149)
Affiliations
    Key Laboratory of Advanced Energy Materials Chemistry (Ministry of Education), Renewable Energy Conversion and Storage Center, College of Chemistry, Nankai University, Tianjin 300071, China
References
Share
https://castjournals.cast.org.cn/joweb/research/EN/10.34133/2020/9068270
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family		 属数
Number of
genus		 种数
Number of
species		 占总种数比例
Percentage of
total species (%)		 属
Genus		 种数
Number of
species		 占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT
Links
Articles
Latest Articles
Most Read
Collections
Updates
Events
News
Multimedia
About
About Us
Contact
No. 86 Xueyuan South Road, Haidian District, Beijing
100081
010-62662699(Operation and Technical Support)
qkjq@cast.org.cn

Copyright © 2025 China Association for Science and Technology. All rights reserved. For all open access content, the relevant licensing terms apply.
Sponsored by the Office of the Leading Group for Cybersecurity and Informatization of CAST, and supported by Science and Technology Review Publishing House