For central black spot defect of molded bearing steel wire, the annealing state and hot-rolled state wire rod samples were tested by means of low acid leaching, metallographic analysis, Scanning Electron Microscopy (SEM) microstructure observation and energy spectrum analysis. By investigation of smelting and rolling process, it is confirmed that the central black spot problem is caused by poor heat preservation of heating agent, causing carbide segregation by element C and Cr concentration at the casting head. According to the causes of the defect, this paper proposed corresponding field process improvement measures, including changing the heating agent to strengthen the heat preservation of the casting head, reduce the pouring superheat, the central black spot defect was finally solved and the qualified rate of the product was increased.
| 科 Family | 属数 Number of genus | 种数 Number of species | 占总种数比例 Percentage of total species (%) | 属 Genus | 种数 Number of species | 占总种数比例 Percentage of total species (%) |
|---|---|---|---|---|---|---|
| 鹅膏菌科Amanitaceae | 2 | 11 | 5.26 | 鹅膏菌属 Amanita | 10 | 4.78 |
| 小菇科 Mycenaceae | 2 | 12 | 5.74 | 丝盖伞属 Inocybe | 5 | 2.39 |
| 多孔菌科 Polyporaceae | 8 | 14 | 6.70 | 蜡蘑属 Laccaria | 5 | 2.39 |
| 红菇科 Russulaceae | 3 | 23 | 11.00 | 小皮伞属 Marasmius | 6 | 2.87 |
| 小菇属 Mycena | 11 | 5.26 | ||||
| 光柄菇属 Pluteus | 5 | 2.39 | ||||
| 红菇属 Russula | 17 | 8.13 | ||||
| 栓菌属 Trametes | 5 | 2.39 |