收藏切换
Application of Waterproof Breather Valve in the Design of Power Battery
收藏切换
PDF
Lei Wang, Chongwei Liu, Hesong Sha
Automotive Engineer | 2023, (5) : 45 - 48
Less
收藏切换
Automotive Engineer | 2023, (5): 45-48
Application of Waterproof Breather Valve in the Design of Power Battery
Full
Lei Wang, Chongwei Liu, Hesong Sha
Affiliations
  • Baoding R&D Branch of Great Wall Motors Co., Ltd., Baoding 071000
Published: 2023-05-15 doi: 10.20104/j.cnki.1674-6546.20220117
Outline
收藏切换

Firstly, the typical environment of power battery affecting the balance of air pressure inside and outside the pack were analyzed in the paper. Secondly, the operational principle of waterproof breather valve was explained, the waterproof breather valve was selected and calculated according to the requirement of amount of breather air and explosion-proof pressure under typical condition. Finally the “condensation” phenomenon caused by the application of breather valve was discussed and tested in typical environment. The results show that the application of breather valve on the power battery pack will not cause water accumulation in the pack due to “condensation”, which will affect the high-voltage insulation in the battery pack, proving the feasibility of application of waterproof breather valve in the power battery design.

Power battery  /  Air pressure balance  /  Waterproof breather valve
Lei Wang, Chongwei Liu, Hesong Sha. Application of Waterproof Breather Valve in the Design of Power Battery[J]. Automotive Engineer, 2023 , (5) : 45 -48 . DOI: 10.20104/j.cnki.1674-6546.20220117
Year 2023 volume Issue 5
PDF
295
124
Cite this Article
BibTeX
Article Info
doi: 10.20104/j.cnki.1674-6546.20220117
  • Online Date:2025-11-25
  • Published:2023-05-15
Article Data
Affiliations
History
  • Revised:2023-02-03
Affiliations
    Baoding R&D Branch of Great Wall Motors Co., Ltd., Baoding 071000
References
Share
https://castjournals.cast.org.cn/joweb/qcgcs/EN/10.20104/j.cnki.1674-6546.20220117
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT