收藏切换
Research and Improvement of Water Leakage in the Positioning Pin of the Door Trim
收藏切换
PDF
Chao Zhang, Yousi Fan, Xiaocao Duan, Siru Chen, Yi Zhu
Automotive Engineer | 2023, (4) : 42 - 48
Less
收藏切换
Automotive Engineer | 2023, (4): 42-48
Research and Improvement of Water Leakage in the Positioning Pin of the Door Trim
Full
Chao Zhang, Yousi Fan, Xiaocao Duan, Siru Chen, Yi Zhu
Affiliations
  • Dongfeng Peugeot Citroen Automobile Co., Ltd., Wuhan 430056
Published: 2023-04-15 doi: 10.20104/j.cnki.1674-6546.20220002
Outline
收藏切换

In order to solve the defect of water leakage of the positioning pin of the door trim during the trial assembly stage of a vehicle model, this article searched for the cause from water management of the door system, positioning method of the door trim, sealing structure of the door trim, and seal material. It is found that the positioning pin through the door sheet metal locating hole is impacted by large water flow, and the sealing pad of the positioning pin blocking the sheet metal hole has less compression on the sheet metal, the gravity and impact force of water is greater than the sealing force of the sealing pad, water pushes the sealing pad apart and flows along the sealing pad to the inside of the door trim. The stress and deformation of the foam cushion block of the positioning pin seal of the door trim were studied. Increasing the thickness of the foam cushion block of the locating pin and increasing the support rate of the positioning pin base to the foam cushion block of the positioning pin will increase the compression of the positioning pin seal cushion block to the sheet metal, and make sure the sealing force of the foam cushion block is greater than the thrust of water on it, the defect was thus solved, and the design and verification criteria for the door trim board positioning and water management were optimized.

Door trim  /  Positioning pin  /  Foam block  /  Water management
Chao Zhang, Yousi Fan, Xiaocao Duan, Siru Chen, Yi Zhu. Research and Improvement of Water Leakage in the Positioning Pin of the Door Trim[J]. Automotive Engineer, 2023 , (4) : 42 -48 . DOI: 10.20104/j.cnki.1674-6546.20220002
Year 2023 volume Issue 4
PDF
151
63
Cite this Article
BibTeX
Article Info
doi: 10.20104/j.cnki.1674-6546.20220002
  • Online Date:2025-11-25
  • Published:2023-04-15
Article Data
Affiliations
History
  • Revised:2022-11-09
Affiliations
    Dongfeng Peugeot Citroen Automobile Co., Ltd., Wuhan 430056
References
Share
https://castjournals.cast.org.cn/joweb/qcgcs/EN/10.20104/j.cnki.1674-6546.20220002
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT